1. Be careful to open the carton, contact us if any damage.
2. This product must be installed in accordance with the applicable installation, code by a person familiar
with the construction and operation of the product and the hazards involved.
3. “caution - risk of shock” and “disconnect power before servicing” when photoelectric switch provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be
connected, so as not to damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before
installation and install it at a flat place without vibration, no swing, no fire hazard.
Caution
Notes for Users
• Please turn off power before install or change assembly parts.
• The input voltage and lamps should be matched, after connecting the power line, please make sure
the wiring section is insulated.
• Make sure to remove or bypass the ballast in the fixtures before install the lamps.
• Suitable for damp locations. Do not use with dimmers.
• Product under SKU number 153464 is suitable for use in enclosed luminaires, min. lamp
compartment dimensions: 14.96*7.87*7.87inches.
• Product under SKU number 153465 is suitable for use in enclosed luminaires, min. lamp
compartment dimensions: 16.54*9.06*9.06inches.
• Product under SKU number 153466 is suitable for use in enclosed luminaires, min. lamp
compartment dimensions: 17.32*10.24*10.24inches.
• Non-professionals must not install and disassemble the lamps.