Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
i9 Premium Area Light
Beyond LED’s i9 Area light is an energy-
efficient, economical, and reliable product
suitable for outdoor applications. It offers
high lumens per watt for maximum power
savings and rebates from power companies.
It can provide consistent lighting with instant
start and retains its uniform operation even
under wet conditions. It is an ideal solution
for all outdoor applications particularly
lighting parking areas, loading docks and
other general lighting applications.
• Operating temperature: -40°C to 45°C
• High efficacy Bridgelux SMD LED
• Die Cast Aluminum housing
• Ultra-thin sleek design
• Integral LED driver, eliminates the need for an external driver
or ballast
• Complies with UL safety regulations
• This product is IP65 rated, therefore, it is best suited for outdoor
applications
• Up to 132 LM/W efficacy, Energy saving with long lifespan
• Available in White, Bronze, Grey, or Black Housing
• Several brackets
• Heat resistant polycarbonate optical lens
• Environment friendly with no mercury
Product Features
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
SKU #
Model #
Housing
Watts
Lumens
CCT
IP
Input
Voltage
Dimming
Certifications
153575
BLT-SB03D-
150WXYA1-
abcdfe
Black
150W
19800LM
5000K
IP65
100-277V
0-10V
UL & DLC
153460
BLT-SB03D-
300WXYA1-
abcdfe
Black
300W
39600LM
5000K
IP65
100-277V
0-10V
UL & DLC
153576
BLT-SB03D-
150WXYA1-
abcdfe
Bronze
150W
19800LM
5000K
IP65
100-277V
0-10V
UL & DLC
153461
BLT-SB03D-
300WXYA1-
abcdfe
Bronze
300W
39600LM
5000K
IP65
100-277V
0-10V
UL & DLC
153503
BLT-SB03D-
150WJT3A1-
GR10SP50
Grey
150W
19800LM
5000K
IP65
100-277V
0-10V
UL & DLC
153504
BLT-SB03D-
300WJT3A1-
GR10SP50
Grey
300W
39600LM
5000K
IP65
100-277V
0-10V
UL & DLC
153502
BLT-SB03D-
150WXYA1-
abcdfe
White
150W
19800LM
5000K
IP65
100-277V
0-10V
UL & DLC
153577
BLT-SB03D-
300WXYA1-
abcdfe
White
300W
39600LM
5000K
IP65
100-277V
0-10V
UL & DLC
151709
Black
Straight Arm Mount
151710
Bronze
Straight Arm Mount
151711
White
Straight Arm Mount
151712
Black
Yoke Mount
151713
Bronze
Yoke Mount
151714
White
Yoke Mount
151706
Black
Slip Fitter Mount
151707
Bronze
Slip Fitter Mount
151708
White
Slip Fitter Mount
151881
Black
Optional U-Bracket Mount
151882
Bronze
Optional U-Bracket Mount
151883
Black
Optional U-Bracket Mount
151884
Bronze
Optional U-Bracket Mount
110786
Optional Photocell
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Parameter
Description
Value
General
Performance
Input Power
150W
Color Temperature
5000K
Lumen
Up to 19800LM
Lumen Efficacy
Up to 132LM/W
CRI (Ra)
>70
Distribution Pattern
Type III (Optional: Type IV and Type V)
Beam Angle
160 Degree
Electrical
Input Voltage and
Frequency
120-277V 50/60Hz
Dimming
0-10V dimming standard
PF
≥0.9
THD
≤20%
Flicker Percent
<5%
Driver Brand
Daermay
Driver Model
MP-150TG-130A
Driver Surge Protection
L/N-PE: 6kV, L-N: 6kV
Physical
Storage Temperature
-40℃ TO 80℃
Operating Humidity
20% - 90% RH
Storage Humidity
10% - 90% RH
LED Brand
Bridgelux
LED Type
SMD3030
LEDs QTY
170 PCS
Housing
Die-cast aluminum
Housing Color
BLACK / BRONZE / WHITE / GREY
EPA
1.59ft2
Qualification
IP Rating
WET (IP65)
Warranty
5 Years
150W Specifications
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Parameter
Description
Value
General
Performance
Input Power
300W
Color Temperature
5000K
Lumen
Up to 39600LM
Lumen Efficacy
Up to 132LM/W
CRI (Ra)
>70
Distribution Pattern
Type III (Optional: Type IV and Type V)
Beam Angle
160 Degree
Electrical
Input Voltage and
Frequency
100-277V 50/60Hz
Dimming
0-10V dimming standard
PF
≥0.9
THD
≤20%
Flicker Percent
<5%
Driver Brand
Daermay
Driver Model
MP-150TG-130A
Driver Surge Protection
L/N-PE: 6kV, L-N: 6kV
Physical
Operating Temperature
-40℃ TO 45℃
Storage Temperature
-40℃ TO 80℃
Operating Humidity
20% - 90% RH
Storage Humidity
10% - 90% RH
LED Brand
Bridgelux
LED Type
SMD3030
LEDs QTY
340 PCS
Housing
Die-cast aluminum
Housing Color
BLACK / BRONZE / WHITE / GREY
EPA
3.48ft2
Qualification
IP Rating
WET (IP65)
Warranty
5 Years
300W Specifications
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Correlated Color Temperature (CCT)
Photometric Data – 150W
Photometric Data – 300W
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
150 Watts
Slip Fitter Mount Yoke Mount Straight Arm Mount
300 Watts
Slip Fitter Mount Yoke Mount Straight Arm Mount
Dimensions
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
1. Slip Fitter Mount
a. Loosen the 4 locking bolts on the slip fitter, connect the wire correctly and put the wire
into pole. Then fasten the locking bolts between slip fitter and the pole (Figure 1-1)
b. Loosen the fixing bolts and adjusting bolts, align the fixture to required angle. Tighten
adjusting bolt and fixing bolts after the angle is confirmed. (Figure 1-1)
2. Yoke Mount
a. Loosen cap fixing screw and take cap off. Loosen fixing bolt, fixed the fixture on the
support and tighten fixing bolts. (Figure 2-1)
b. Let the AC wire go through the support hole and connected correctly. Close cap and
tighten cap fixing screw after AC cable is well placed in the support. (Figure 2-1)
c. Loosen adjusting screws, align the fixture to required angle and fasten the screws.
(Figure 2-1)
Installation Instructions
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
3. Straight Arm Mount
a. Open the side lid of direct bracket, let the power cable go through the direct bracket.
Fix the direct bracket to the end of lamp body with bolt. Let the pole cable go through
the direct bracket. (Figure 3-1)
b. Fix the direct bracket to the square pole with bolt. Connect the power cable to the pole
cable, make sure good protection on the wire connection, and put the wire in the direct
bracket; close the side lid and tighten it, (Figure 3-2) then finish in installation.
c. Notice: Round pole should be with adaptive plate. (Figure 3-3)
Photocell Function
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Motion Sensor Function (Optional)
Structure of Motion Sensor (With Shorting Cap)
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Bracket Type
Size
Qty/Box
150W Box
23.82 X 14.57 X 6.69 in
1 PCS
300W Box
32.28 X 15.34 X 6.50 in
1 PCS
Slip Fitter Bracket Box
15.55 X 8.66 X 8.86 in
8 PCS
Yoke Bracket Box
14.37 X 11.22 X 6.30 in
8 PCS
Straight Bracket Box
18.31 X 8.46 X 7.28 in
6 PCS
**Tolerance of Carton Size: ±15 MM, Tolerance of Weight: ±10%.
Wiring Diagram
Packaging
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
Application
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.
To reduce the risk of death, personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warnings and instructions included with and on the fixture box and all
fixture labels. Before installing, servicing, or performing routine
maintenance upon this equipment, follow these general precautions.
Commercial installation, service and maintenance of luminaires should
be performed by a qualified licensed electrician.
For the installation: If you are unsure about the installation or
maintenance of the luminaires, consult a qualified licensed electrician
and check your local electrical code. To prevent wiring damage or
abrasion, do not expose wiring to edges of sheet metal or other sharp
objects. Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply. Turn off the power when you perform any
maintenance. Verify that supply voltage is correct by comparing it with
the luminaire label information. Make all electrical and grounded
connections in accordance with the National Electrical Code and any
applicable local code requirements. All wiring connections should be
capped with UL approved wire connectors.
CAUTION: RISK OF INJURY
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be
hazardous to children.
**i9 Premium Area Light has 5 Year Warranty.
************
Safety Precautions
Warranty
Loading...