Page 1
TECHNICAL SPECIFICATIONS
SMC65
SM SERIES
Throat diameter
Rated impedance
Minimum impedance
D.C. Resistance
Power capacity*
Program power
Sensitivity**
Frecuencia range
Recommended crossover
Voice coil diameter
Magnetic assembly weight
Flux density
BL Factor
0.8 kHz or higher (12dB/oct. min)
MOUNTING INFORMATION
Overall diameter
Depth
Mounting
Net weight
Shipping weight
Four M6 threaded holes, 90º apart on
101.6 mm (4 in.) diameter circle
36 mm. 1.4 in.
8 ohms
6.9 ohms @ 3.3 kHz
5.5 ohms
50 w AES above 800 Hz
70 w AES above 1.5kHz
100 w above 800 Hz
140 w above 1.5kHz
107 dB 1w @ 1m
coupled to TD-365 horn
0.7 - 18kHz
72.2 mm. 2.84in
4.1 kg. 9.02 lb.
1.55 T
8.8 N / A
DIMENSION DRAWINGS
156 mm. 6.14 in.
64 mm. 2.52 in.
4.2 kg. 9.24 lb.
4.7 kg. 10.34 lb.
MATERIALS
• Diaphragm: titanium.
• V oice coil: edgewound aluminium ribbon.
• Voice coil former: polyimide.
• Magnet: ferrite.
Notes:
*The power capacity is determined according to AES2-1984 (r2003) standard.
Program power is defined as the transducer’s ability to handle normal music program material.
**Sensitivity was measured at 1 m distance, on axis, with 1 w input, averaged in the range 1-7 kHz.
GENERAL DESCRIPTION
This 1.4” professional high quality compression driver features a composite diaphragm assembly. The mylar surround provides damping and
avoids typical resonant peaks of metal surrounds. By the other hand, the pure titanium dome exhibits the unique mechanical properties of this
material.
FREQUENCY RESPONSE AND DISTORTION CURVES
FREQUENCY RESPONSE AND DISTORTION CURVES
Note: on axis frequency response measured coupled to TD-385 horn
in anechoic chamber, 1w @ 1m.
Note: on axis frequency response measured coupled to TD-565 horn
in anechoic chamber, 1w @ 1m.
088
Loading...