Beyerdynamic UNITE-CC-24P, UNITE-CC-36P User's Guide
UNITE CC
COCKPIT CASE
QUICK START GUIDE
KURZANLEITUNG
Unite CC – Cockpit Case
The Unite CC cockpit case belongs to the wireless Unite system from beyerdynamic. For detailed descriptions of the
use, please refer to the operating instructions for the entire system, which you can download from the internet at:
www.beyerdynamic.com/unite
3
1. Safety instructions
The lightning flash within an equilateral triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the device that may be sufficient enough to constitute a risk of electric shock to
users.
The exclamation mark within an equilateral triangle is intended to ale the user to the presence of impoant
operating and maintenance inructions in the literature accompanying the product.
General
• READ the operating instructions.
• KEEP the operating instructions.
• HEED all warnings.
• FOLLOW all instructions.
Disclaimer
• beyerdynamic GmbH & Co. KG will not be liable if any damage, injury or accident occurs due to negligent, incorrect
or inappropriate operation of the product.
1. Read these inructions.
2. Keep these inructions.
3. Heed all warnings.
4. Follow all inructions.
5. Do not use this device near water.
english
4
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Inall in accordance with the manufacturer’s inructions.
8. Do not inall near any heat sources such as radiators, heat regiers, oves, or other device (including amplifiers)
that produce heat.
9. For safety purposes do not make any changes to the polarized or grounding type plug. A polarized plug has two
contacts with one wider than the other. A grounding type plug has two contacts and a third grounding prong. The
wide contact or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord by not walking or anding on it or pinching, this is considered for plugs especially where
they exit from the device.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the ca, and, tripod, bracket, or table specified by the manufacturer, or sold with the device. When
a ca is used, use caution when moving the ca/device combination to avoid injury from tipping over.
13. Unplug this device during lightning orms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device,
the device has been exposed to rain or moiure, does not operate normally, or has been dropped.
Location
• The equipment must be set up so that the mains switch, mains plug and all connections on the rear of the device are
easily accessible.
• If you transport the equipment to another location take care to ensure that it is adequately secured and can never
be damaged by being dropped or by impacts on the equipment.
Fire hazard
• Never place naked flames (e.g. candles) near the equipment.
Unite CC – Cockpit Case
Unite CC – Cockpit Case
Humidity / heat sources
• Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the immediate
vicinity of swimming pools, showers, damp basement rooms or other areas with unusually high atmospheric humidity.
• Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the equipment
could cause a short circuit.
• Do not install near any heat sources such as radiators, heat registers, stoves or other device (including amplifiers)
that produce heat.
Connection
• The equipment must be connected to a mains socket that has an earth contact.
• Protect the power cord by not walking or anding on it or pinching, this is considered for plugs especially where they
exit from the device.
• Lay all connection cables so that they do not present a trip hazard.
• Whenever working on the equipment switch off all inputs and outputs to the power supply.
• Check whether the connection figures comply with the existing mains supply. Serious damage could occur due to
connecting the system to the wrong power supply. An incorrect mains voltage could damage the equipment or
cause an electric shock.
• Please note that different operating voltages require the use of different types of power cable and plugs.
Please refer to the following table:
Voltage Power plug according to andard
110 - 125 V UL817 and CSA C 22.2 no. 42.
220 - 230 V CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.
240 V BS 1363 (1984): “Specification for 13A fused plugs and switched and un-switched socket outlets.”
• If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked and repaired.
• Do not hold the mains cable with wet hands. There must be no water or dust on the contact pins. In both cases you
could receive an electric shock.
5
english
6
• The mains cable must be firmly connected. If it is loose there is a fire hazard.
• Always pull out the mains cable from the mains and/or from the equipment by the plug – never by the cable. The
cable could be damaged and cause an electric shock or fire.
• Do not use the equipment if the mains plug is damaged.
• If you connect defective or unsuitable accessories, the equipment could be damaged. Only use connection cables
available from or recommended by beyerdynamic.
Switching off
• When switching off the device, also disconnect the power plug from the power socket. Make sure that you do not
pull on the cable, but on the power plug.
Ventilation
• Do not insert objects into the ventilation grilles or other openings. You could damage the equipment and/or injure
yourself.
Disconnect
• For pluggable equipment, the socket-outlet shall be near the equipment and shall be easily accessible.
Maintenance
• Only clean the equipment with a slightly damp or dry cloth. Never use solvents as these damage the surface.
Trouble shooting and servicing
• Never open the device yourself. You could receive an electric shock. There are no user-serviceable parts inside.
• Leave all service work to authorised expert personnel.
Unite CC – Cockpit Case
Unite CC – Cockpit Case
Charging
• A completely new battery may need to be charged and discharged several times before it has reached its full
change capacity.
• Do not throw used batteries in the household wae, but hand them over to the local collection points.
• High ambient temperatures during charging (> +40 °C) aect the eiciency of the charging process and the lifetime
of the rechargeable battery.
Disposal
This symbol on the product, in the instructions or on the packaging means that your electrical
and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information,
please contact the local authority or your retailer where you purchased the product.
Battery disposal
This symbol means that according to local laws and regulations your product and/or its battery
shall be disposed of separately from household waste. When this product reaches its end of life,
take it to a collection point designated by local authorities. The separate collection and recycling
of your product and/or its battery at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the environment.
• Old batteries may contain substances that are harmful to your health and environment.
• Dispose used batteries always according to the applicable disposal regulations. Please do not
throw used battery packs into the fire (danger of explosion) or your household rubbish, take
them to your local collection points. The return is free and required by law. Please dispose
discharged batteries only.
• All batteries are recycled to reclaim valuable material such as iron, zinc or nickel.
7
english
8
Unite CC – Cockpit Case
2. Versions
Unite CC-24P Case for charging, transport and storage,
with max. 24 charging compartments for bodypack receivers / transmitters,
network connection, integrated power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 713.074
Unite CC-36P same as above, but with max. 36 charging compartments
for bodypack receivers / transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 728.306
3. Supplied accessories
Power cable
Key
Quick Start Guide
4. Optional accessories
Unite CC Bag Storage bag for optional accessories (e.g. headphones) . . . . . . . . . . . . . . . . . . . . . Order # 713.066
Unite CC – Cockpit Case
Pair/Reset
Status
• Pair & Charge
• Charge only
5. Controls and indicators
Top view of Unite CC-24P version
9
Button for initiating the
pairing process or
clearing stored pairing information in the charger
Status indicator light for
pairing status
Switch for “Pair & Charge”
or “Charge only”
Charging units with
4 charging compartments
each
Slots for more optional
charging units or one
optional charging unit
and one optional
compartment for storing
the Unite TH handheld
transmitter
english
10
Rear view
Reset button
Ethernet connection
USB connection
Mains connection
Fuse drawer (2 x 3.15 A fuse, time-lag)
On-off switch
Unite CC – Cockpit Case
Unite CC – Cockpit Case
6. How to operate the Cockpit case
The Unite CC cockpit case is used for charging the rechargeable batteries inside the bodypack transmitters and
receivers as well as transmitting the pairing information from the transmitter to the receivers. The Unite CC-24P has
6 charging units, each with 4 charging compartments so that a maximum of 24 bodypack transmitters or receivers can
be charged simultaneously. The Unite CC-36P has 9 charging units each with 4 charging compartments so that a
maximum of 36 charging compartments are available.
Warning: When the Cockpit case is in use, do not mount the cover on the case. There is a risk of overheating and fire.
6.1 Mains connection
• Connect the IEC connector of the power cable to the mains connection of the Cockpit case. Connect the power plug
to a power outlet.
• Switch on the Cockpit case via the on-o switch.
• When not in use, switch o the device and disconnect the power plug from the power socket. Make sure that you do
not pull on the cable, but on the power plug.
6.2 Establish pairing
Transmitters and receivers must be paired so that they can communicate with each other. For a successful
pairing the channel name, group ID and audio encryption key are required. The required audio encryption
key is generated in the Unite CC cockpit case or via the Unite Manager software and during the pairing
process it is first stored on the cockpit case and then it is transferred to the transmitter and receiver in the
charging compartments. In this context, please also note the position of the switch on the cockpit case. The
switch must be set to the “Pair & Charge” position so that the pairing information can be transmitted from
the Unite CC to the transmitters and receivers.
There are three different ways to pair the Unite transmitters with receivers:
1. Via an individual charger (refer to the following description or system manual online).
2. Using the Unite Manager Software on a PC (refer to the Unite Manager Software manual or system
manual online).
3. Via dynamic channel search (refer to system manual online, chapter “Special functions”.
11
english
Loading...