Beyerdynamic TG V96c Specifications

TG V96c

Condenser Microphone

OPTIONAL ACCESSORIES

BMC 05 FM Standard microphone cable

XLR-XLR, length 5 m . . . . . . . . . . Order # 434.78

BMC 10 FM Standard microphone cable

XLR-XLR, length 10 m . . . . . . . . . Order # 434.795

GST 400 Microphone stand, 3/8",

height 0.90 - 1.65 m,

with removable G 400 boom. . . . Order # 421.294

GST 500 Microphone stand, 3/8",

height 0.85 - 1.60 m,
with removable, telescopic

G 500 boom . . . . . . . . . . . . . . . . Order #406.252

ST 600 Stand, 3/8",

height 0.87 - 1.57 m. . . . . . . . . . Order # 421.316

MKV 8 Microphone clamp,

3/8" and 5/8" . . . . . . . . . . . . . . . Order # 407.216

TECHNICAL SPECIFICATIONS

Transducer type . . . . . . . . . . . . . . . . Condenser

Operating principle. . . . . . . . . . . . . . Pressure gradient

Polar pattern . . . . . . . . . . . . . . . . . . Cardioid

Frequency response

Close miking . . . . . . . . . . . . . . . . . . 20 - 20,000 Hz

Distant miking (measured at 1 m). . . 55 - 20,000 Hz

Open circuit voltage . . . . . . . . . . . . . 4 mV/Pa (-48 dBV) ±2 dB

Nominal impedance . . . . . . . . . . . . . 60 Ω

Load impedance. . . . . . . . . . . . . . . . ≥ 1 kΩ

Max. SPL at 1 kHz . . . . . . . . . . . . . . 150 dB

Signal-to-noise ratio . . . . . . . . . . . . . 64 dB [CCIR, Q-Peak]

Equivalent SPL . . . . . . . . . . . . . . . . . 20 dB [A, RMS]

In-phase rejection 50 - 20,000 Hz. . . ≥ 60 dB

Power supply . . . . . . . . . . . . . . . . . . Phantom power: 24 - 48 V

(recommended: 48 V)

Current consumption . . . . . . . . . . . . 4.3 mA

Connection . . . . . . . . . . . . . . . . . . . 3-pin male XLR,

1 = ground

2 = +

3 = ­Dimensions

Length . . . . . . . . . . . . . . . . . . . . . . . 185 mm

Shaft diameter . . . . . . . . . . . . . . . . . 26 mm

Head diameter . . . . . . . . . . . . . . . . . 48 mm

Weight. . . . . . . . . . . . . . . . . . . . . . . 330 g

APPLICATIONS

The strength of the TG V96c lies in its absolutely faithful reproduction

- even of the finest nuances and on stage every detail counts. The
microphone’s exterior stands out for its sophisticated design, with
a special coated surface that is pleasant to the touch. But it is what’s
inside that makes the TG V96c into a topclass microphone and
makes it stand out with vocalists, professional rental companies and
sound technicians: this true condenser microphone shines with a
captivatingly natural sound. The subtle treble boost provides an
open, finely detailed and unobtrusive sound pattern. Further
advantage: the TG V96c can be operated with 24 volt phantom
powering without affecting the performance. The 5-layer pop
protection made from metal gauze of differing mesh sizes and a
sintered plate optimally suppresses plosives while significantly
improving the rear-attenuation. The TG V96c is rugged enough for
the stage and is supplied with an individual frequency response
curve print out. Handcrafted in Germany.

FEATURES

• High-quality vocal microphone

• Frequency-independent cardioid polar pattern

• Compensated proximity effectt

• Wire mesh basket without foam

• Shock mounted microphone transducer and electronics

VERSION

TG V96c Condenser vocal microphone,

cardioid incl. microphone clamp . . Order # 707.325

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/TG V96c (08.11)

1 of 2

TG V96c

FREQUENCY RESPONSE & POLAR PATTERN

This polar pattern and frequency response curve (± 2 dB) correspond to a typical production sample for this microphone.

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/TG V96c (08.11)

2 of 2

Frequency response ± 2 dB TG V96c 0 dB = 4 mV/Pa