Beyerdynamic TG-D50D Datasheet

TG D50d

Dynamic Microphone

OPTIONAL ACCESSORIES

BMC 05 FM Standard microphone cable

XLR-XLR, length 5 m. . . . . . . . . . . Order # 434.787

BMC 10 FM Standard microphone cable

XLR-XLR, length 10 m. . . . . . . . . . Order # 434.795

MKV 87 Patented clamp for drum rim,

3/8" . . . . . . . . . . . . . . . . . . . . . . . Order # 459.356

MKV 99 Microphone clamp . . . . . . . . . . . . Order # 471.909

GST 590 Microphone stand, 3/8",

height 0.34 - 0.60m,

with telescopic boom . . . . . . . . . . Order # 418.765

ST 99 Miniature stand . . . . . . . . . . . . . . Order # 471.917

TECHNICAL SPECIFICATIONS

Transducer type . . . . . . . . . . . . . . . . Dynamic

Operating principle. . . . . . . . . . . . . . Pressure gradient

Polar pattern . . . . . . . . . . . . . . . . . . Cardioid

Frequency response
Close miking (switch position LIN) . . 50 - 17,000 Hz
Close miking (switch position EQ). . . 20 - 15,000 Hz
Distant miking (switch position LIN,

measured at 1 m) . . . . . . . . . . . . . . . 80 - 17,000 Hz

Open circuit voltage

(switch positon LIN) . . . . . . . . . . . . . 2.4 mV/Pa (-52.5 dBV) ±3 dB

Open circuit voltage

(switch positon EQ) . . . . . . . . . . . . . 0.9 mV/Pa (-60.9 dBV) ±3 dB

Nominal impedance

(switch position LIN) . . . . . . . . . . . . . 600 Ω

Nominal impedance

(switch position EQ) . . . . . . . . . . . . . 200 Ω

Load impedance. . . . . . . . . . . . . . . . ≥ 2 kΩ

Connection . . . . . . . . . . . . . . . . . . . 3-pin XLR connector, male

Length . . . . . . . . . . . . . . . . . . . . . . . 104 mm

Shaft diameter . . . . . . . . . . . . . . . . . 24 mm

Head diameter . . . . . . . . . . . . . . . . . 41 mm

Weight (without clamp) . . . . . . . . . . 134 g

Weight (with clamp). . . . . . . . . . . . . 189 g

APPLICATIONS

The dynamic TG D50d microphone is exceptionally useful for
miking drums. At the bottom there is a switch to select between LIN
(linear) and EQ (Equalizer) frequency responses. If the switch has been
set to LIN , the microphone can be used for miking toms, snare and
other instruments. If the switch has been set to EQ, the microphone
can be specially used for kick drums, supplying an appropriate
frequency response and balanced sound without complicated
settings on the mixing console. By using the ST 99 stand the
microphone can also be placed inside the kick drum.
The mass-reduced special diaphragm supplies absolute impulse
fidelity and high gain before feedback.

FEATURES

• Cardioid polar pattern

• Integrated elastic suspension

• Rugged design

• Excellent impulse fidelity

• Switch for frequency response: LIN (linear) and EQ (equalizer)

VERSION

TG D50d Dynamic drum microphone for lower

pitched instruments, cardioid,
incl. MKV 99 microphone clamp. . Order # 707.430

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1/TG D50d (04.12)

1 of 2

TG D50d with MKV 99 microphone clamp LIN / EQ switch at the bottom

TG D50d

FREQUENCY RESPONSE & POLAR PATTERN

This polar pattern and frequency response curve (± 3 dB) correspond to a typical production sample for this microphone.

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1/TG D50d (04.12)

2 of 2

WIRING DIAGRAM

Frequency response ± 3 dB TG D50d Pos. LIN 0 dB = 2.4 mV/Pa

Frequency response ± 3 dB TG D50d Pos. EQ 0 dB = 0.9 mV/Pa