beyerdynamic TG D35 User guide

Page 1
TG D35 deutsch TG D35 english TG D35 français
ie haben sich für das dynamische Mikrofon TG D35 von
S
eyerdynamic entschieden. Vielen Dank für Ihr Vertrauen.
b Nehmen Sie sich bitte einige Minuten Zeit und lesen Sie diese Produktinfor mation aufmerksam durch.
Sicherheitsinformationen
• Pusten Sie nicht in das Mikrofon und vermeiden Sie es, auf den Mikrofonkorb zu klopfen. Zur Funktionskontrolle sollten Sie in das Mikrofon sprechen.
Anwendung
• Mikrofonierung am Schlagzeug, z.B. Snare oder Toms
• Abnahme von Percussioninstrumenten wie Congas oder Bongos
Anschluss
Das TG D35 ist mit einem 3-poligen XLR-Stecker ausgestattet sowie mit einem 3/8"-Gewinde zur Befestigung auf Stativen oder auf der mitgelieferten Mikrofonklammer MKV 87. Sie können das Mikrofon an jeden symmetrischen Mikrofoneingang anschließen. Erhältliche Kabel dafür finden Sie unter „Zubehör - optional“. Eventuell anliegende Phantom­speisung beschädigt das Mikrofon nicht.
Inbetriebnahme
• Die Mikrofonklammer wird an den Spannreifen einer Trommel oder ähnliche Hardwareteile geklemmt und das Mikrofon auf die Schallquelle ausgerichtet.
• Die Supernierencharakteristik verringert das Übersprechen von benachbarten Quellen und erhöht die Rückkopplungs­sicherheit.
Pflege
Bei Bedarf reinigen Sie das TG D35 und das Anschlusskabel mit einem weichen feuchten Tuch. Wenn notwendig, können Sie ein mildes Reinigungs mittel (z.B. Geschirrspülmittel) verwenden, auf keinen Fall löse mittel haltige Reiniger! Achten Sie darauf, dass in den Mikrofonkorb keine Flüssigkeit gelangt.
Service
Im Servicefall wenden Sie sich bitte an autorisiertes Fach­ personal. Öffnen Sie das Mikrofon auf keinen Fall selbst, Sie könnten sonst alle Gewährleistungsansprüche verlieren.
Version
Bez. Beschreibung . . . . . . . . . . . . . . . . . Best.-Nr.
TG D35 Dynamisches Drum-Mikrofon,
Superniere, schwarz, mit 3-pol. XLR-Stecker,
inkl. Mikrofonklammer MKV 87 . . . . 708.429
Entsorgung
Dieses Produkt darf am Ende seiner Lebensdauer nicht über den normalen Haushaltsabfall entsorgt werden, sondern muss an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden. Das Symbol auf dem Produkt, der Gebrauchsanweisung oder der Verpackung weist darauf hin.
hank you for selecting the TG D35 dynamic microphone from
T
eyerdynamic.
b Please take some time to read carefully through this information before using the product.
Safety Information
• Do not blow into the microphone and do not knock on the microphone basket. It is preferable to carry out a speech trial.
Application
• Close miking of drums, for example snares and tom-toms
• Miking up percussion instruments such as congas and bongos
Connection
The TG D35 is fitted with a male 3-pin XLR connector and a 3/8" thread for mounting on stands or the supplied MKV 87 micro­phone clamp. You can connect the microphone to any balanced microphone input. Available cables for the microphone can be found under “Optional Accessories”. The use of phantom power does not damage the microphone.
Setting up
• The microphone clamp should be attached to the drum hoop or to similar hardware components; in this way, the microphone can be set at the optimum angle to the audio source.
• The supercardioid polar pattern reduces crosstalk from neighbouring sources and increases feedback suppression.
Maintenance
Use a soft, damp cloth for cleaning the TG D35 microphone and connecting cable. If necessary, you can use a gentle cleansing agent (such as washing-up liquid), but on no account use a cleaner containing solvents! Make sure not to allow any liquid to enter the microphone grille.
Service
Servicing must be carried out by qualified service personnel only. Dismantling the microphone yourself will invalidate the guarantee.
Version
Model Description. . . . . . . . . . . . . . . . . . . Order #
TG D35 Dynamic drum microphone,
Disposal
This symbol on the product, in the instructions or on the packaging means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
supercardioid, black, with 3-pin male XLR connector, incl. MKV 87 microphone clamp . . . 708.429
ous vous félicitons pour l’achat du microphone dynamique
N
G D35 de beyerdynamic et vous remercions de votre confiance.
T Veuillez lire attentivement ces informations produit avant de la mise en marche
du microphone.
Sécurité
• Veillez à ce que le microphone soit protégé de l’humidité et de tous dommages résultant de chutes ou de chocs mécaniques.
• Ne soufflez pas dans le microphone. Effectuez plutôt un test de parole.
Application
• Prise de son sur batterie, par exemple caisse claire ou toms
• Prised de son d’instruments à percussion tels que congas ou bongos
Branchement
Le TG D35 est doté d’une fiche XLR 3 broches et un filetage 3/8" pour des pieds de sol ou la pince de microphone MKV 87 fournie. Vous pouvez brancher le microphone sur toutes les entrées de microphone symétriques. A cet effet, vous trouverez les câbles disponibles au point « Accessoires en option ». Une alimentation fantôme éventuellement applique n’endommage pas le micro­phone.
Mise en service
• La pince de microphone est fixée sur le cercle de tom ou de matériel analogue et le microphone peut ensuite être optimalement dirigée vers la source sonore.
• La directivité supercardioïde réduit les interférence avec des sources voisines et enforce la protection face à l’effet Larsen.
Entretien
Si nécessaire, veuillez nettoyer l’TG D35 ainsi que son câble de raccordement avec un tissu doux humidifié. Vous pouvez ajouter un produit vaiselle; n’utilisez jamais des détergents; éviter toute pénétration de l’eau dans le transducteur du microphone.
Service après-vente
En cas de dommage, veuillez vous adresser au service après-vente de beyerdynamic. N’ouvriez pas le microphone, vous risqueriez sinon de perdre vos droits de garantie.
Modèles
Mod. Description. . . . . . . . . . . . . . . . . . . Art. N°
TG D35 Microphone dynamique pour
Evacuation
Ce symbole sur le produit, l’emballage ou dans le manuel signifie que votre équipement électrique et électronique doi t être, en fin de vie, jeté séparement de vos déchets ménages. Il existe en France des systèmes de collecte différents pour les déchets recyclables. Pour plus d’information, veuillez contacter les autorités locales ou le revendeur chez qui vous avez acheté le produit.
batterie, supercardioïde, noir, avec fiche XLR 3 broches,
avec pince de fixation MKV 87 . . . . 708.429
Page 2
TG D35 english TG D35 françaisTG D35 deutsch
+20
+10
0 dB
-10
-20
-30 20 200 2k 20k100 1k 10k50 500 5k Hz
--
2 cm
1 m
125 Hz
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
300°
270°
210°
240°
180°
150°
120°
90°
60°
30°
330°
-5dB
-10dB
-15dB
-20dB
Frequenzkurve • Frequency response curve • Courbe de fréquence
± 3 dB TG D35 0 dB = 2.2 mV/Pa
Richtdiagramm • Polar pattern • Directivité
Technische Daten
Wandlerprinzip. . . . . . . . . . . . . . Dynamisch
Arbeitsprinzip . . . . . . . . . . . . . . Druckgradientenempfänger
Richtcharakteristik . . . . . . . . . . . Superniere
Übertragungsbereich:
Nahfeld . . . . . . . . . . . . . . . . . 50 - 14.000 Hz
Fernfeld (Entfernung 1 m) . . . . 60 - 14.000 Hz
Feldleerlaufübertragungsfaktor . . . 2,2 mV/Pa (-53 dBV) ±3 dB
Nennimpedanz. . . . . . . . . . . . . . 600 Ω
Nennabschlussimpedanz. . . . . . . > 2 kΩ
Anschluss . . . . . . . . . . . . . . . . . XLR, 3-pol., male
Abmessungen:
Länge . . . . . . . . . . . . . . . . . . 72 mm
Schaftdurchmesser . . . . . . . . . 28,5 mm
Kopfdurchmesser . . . . . . . . . . 35 mm
Gewicht (ohne Klammer) . . . . . . 95 g
Technical Specifications
Transducer type . . . . . . . . . . . . . Dynamic
Operating principle. . . . . . . . . . . Pressure gradient
Polar pattern . . . . . . . . . . . . . . . Supercardioid
Frequency response:
Close miking . . . . . . . . . . . . . 50 - 14,000 Hz
Distant miking
(measured at 1 m). . . . . . . . . . 60 - 14,000 Hz
Open circuit voltage. . . . . . . . . . . . 2.2 mV/Pa (-53 dBV) ±3 dB
Nominal impedance . . . . . . . . . . 600 Ω
Load impedance . . . . . . . . . . . . > 2 kΩ
Connector . . . . . . . . . . . . . . . . . XLR, 3-pin, male
Dimensions:
Length. . . . . . . . . . . . . . . . . . 72 mm
Shaft diameter . . . . . . . . . . . . 28.5 mm
Head diameter . . . . . . . . . . . . 35 mm
Weight (without clamp). . . . . . . . 95 g
Spécifications techniques
Type de transducteur . . . . . . . . . . . Dynamique
Fonctionnement acoustique . . . . . . . Gradient de pression
Directivité . . . . . . . . . . . . . . . . . . . Supercardioïde
Bande passante:
à proximité . . . . . . . . . . . . . . . . . 50 - 14.000 Hz
à distance (distance 1 m) . . . . . . 60 - 14.000 Hz
Sensibilité . . . . . . . . . . . . . . . . . . . 2,2 mV/Pa (-53 dBV) ±3dB
Impédance nominale. . . . . . . . . . . . 600 Ω
Impédance de charge nom. . . . . . . . > 2 kΩ
Connexion . . . . . . . . . . . . . . . . . . . XLR, 3 broches, mâle
Dimensions:
Longueur . . . . . . . . . . . . . . . . . . 72 mm
Diamètre corps . . . . . . . . . . . . . . 28,5 mm
Diamètre tête . . . . . . . . . . . . . . . 35 mm
Poids (sans pince de microphone) . . 95 g
www.beyerdynamic.com
beyerdynamic GmbH & Co. KG • Theresienraße 8
74072 Heilbronn • Germany • Phone +49 7131 617-300 • info@beyerdynamic.de
Weitere Veriebspaner weltweit finden Sie im Internet unter www.beyerdynamic.com Abbildungen nicht veragsbindend. Änderungen vorbehalten.
For fuher diributors worldwide, please go to www.beyerdynamic.com Non-contractual illurations. Subject to change without notice.
DE-EN-FR 3 / TG D35 / 649.015 (03.19)
TG D35
DYNAMISCHES MIKROFON
DYNAMIC MICROPHONE
MICROPHONE DYNAMIQUE
PRODUKTINFORMATION
PRODUCT INFORMATION
INFORMATIONS DE PRODUIT
Loading...