Beyerdynamic Quinta MU 21, Quinta MU 31, Quinta MU 22 User Manual

beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Contents subject to change without notice. E1 / Quinta MU 22 (07.12)
Quinta MU 22
Order # 723.940
FEATURES
• Direct Sequence Spread Spectrum (DSSS) provides high immunity from interference and unauthorised listening, even when using other radio systems
• Wireless transmission with integrated True Diversity antenna technology for transmitting and receiving
• Three selectable frequency bands : 2.4 / 5.2 / 5.8 GHz
• Automatic or manual silent change to an interference-free freqquency response acc. to EN 3000328 ETSI
• Automatic recognition of interferences in all frequency ranges
• Processor-controlled and automatic audio channel allocation of the microphone units
• Digital 128-bit encryption and additional 24-bit PIN code against unauthorised listening
• Removable gooseneck microphone with Scudio
®
technology in
different lengths, 5-pin XLR connector with hidden lock
• Red LED ring around the gooseneck to indicate the ready-to-talk status of the microphone
• Soft touch silicone buttons with backlit illumination in 3 colours
• Operating panel with braille made of stainless steel
• Two microphone buttons for two participants to switch the microphone on / off
• Voice-controlled activation of the microphone possible
• High-quality plastic housing with a non-glare matt black coating of Alexit soft-touch paint
• Integrated loudspeaker with voice equalisation
• Decreased loudspeaker volume when microphone is switched on
• Adjustable mini stereo jack output (3.5 mm) as documentation or headphones
• Parameters can be programmed via the control unit and the appropriate configuration software
• Automatic Power OFF when the control unit is in the stand-by mode or switched off
• Power on LED
• Charging status of the battery can be monitored and transmitted to the control unit
• Operating control LED indicates the status when the minimum capacity is too low
• Charging contacts for charging the integrated rechargeable batteries in the charging unit
• Reliable processor-controlled charging electronics avoids memory effect and ensures immediate use of the microphone units
• LED ring of the gooseneck microphone indicates the charging status and the power on LED on the rear indicates the use of an external power adapter
• Maximum charging time of 2.5 hours when the battery (NiMH) is completely empty
• DC connection for battery recharging or powering via external power adapter
• Minimum operating time 20 hours
1 of 7
Supplied without gooseneck microphone
Quinta MU 22
DESCRIPTION
The Quinta MU 22 delegate microphone unit is equipped with two microphone buttons in the housing so that two participants can share one microphone unit. The operating software can differentiate who is to speak. With the Automatic Channel Allocation function the transmitting channels of the microphone units are allocated automatically. When the microphone button is pressed in the manual operating mode the request-to-talk is received by the control unit (a possible external dual colour LED will illuminate red). Then the control unit checks which of the available receiving channels is free. Then the control unit informs the microphone unit which channel it should use for transmitting. When the channel of the microphone unit is set and checked by the control unit, the microphone is switched on. The ready-to-talk status of the microphone is also indicated by the red LED ring around the gooseneck microphone. In the Request­to-Talk-mode of the discussion system the request-to-talk is received, but the microphone is not switched on. The red LED indicates that the request-to-talk has been received. The micro­phone is switched on by the operator at the PC by using the “Quinta Conference” software or a media control system. When the microphone button is pressed once again, the delegate clears his/her request-to-talk.
Depending on the configuration with the “Quinta Conference” software the following operating modes are available: Override: the first microphone is switched off, when the maximum number of switched on microphones is exceeded. Voice activation: the microphone is switched on, when someone speaks into it. Push-To-Talk: the microphone button is held down, while the participant is speaking.
The integrated loudspeaker reproduces the audio signal of the whole conference system. Depending on the audio signal routing in the control unit the loudspeaker can reproduce other audio signals such as a wireless microphone in the auditorium.
The parameters of the microphone unit are adjusted via PC by using the “Quinta Conference” software. The parameters are adjusted for all microphone units.
A headphone (e.g. DT 1) can be connected to the documentation output. The volume of the loudspeaker is adjusted and can be controlled with the Quinta CU control unit or a media control system. The ducking level determines the attenuation of the loudspeaker level when the microphone of the microphone unit is switched on. Each microphone unit has its own address. An existing system can be complemented at any time.
The DSSS transmission offers high immunity against unauthorised listening with a 128-bit encryption. In addition to this, the conference system including the appropriate microphone units can be protected with PIN code (24-bit). A microphone unit that does not have the correct PIN code will be identified by the control unit and switched off immediately.
The integrated rechargeable battery allows a minimum operation of the microphone unit of 20 hours depending on the participation in the discussion. As soon as the remaining battery time is below a certain threshold of 1 hour, the power on LED on the rear of the microphone unit will flash or if the system is controlled by PC or a media control system, the low battery capacity can be also indicated. The charging time of a completely empty battery is around 2.5 hours with the integrated processor-controlled charging electronics. Depending on the use of the microphone unit the charging time can be less. As an option the microphone unit can be powered and charged by a DC power supply adapter.
The microphone unit is switched on by briefly pressing the micro­phone button once. There are various ways to switch off the microphone unit:
1. Press the microphone button for 3 seconds.
2. Press the standby button of the MCW-D 50 control unit for
3 seconds to switch off all activated microphone units.
3. Switch off all microphone units via an RS 232 or TCP/IP
command from the PC or media control system.
4. Switch off the control unit; after approx. 3 minutes the micro-
phone unit will be switched off.
beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Contents subject to change without notice. E1 / Quinta MU 22 (07.12)
2 of 7
OPTIONAL ACCESSORIES
GM 313 Q Condenser (electret) gooseneck
microphone cardioid, matt black,
300 mm long. . . . . . . . . . . . . . . . . Order # 724.203
GM 314 Q same as above, but 400 mm long . . Order # 724.211 GM 315 Q same as above, but 500 mm long . . Order # 724.238 GM 316 Q same as above, but 600 mm long . . Order # 724.351
CC2 Modular charging and transport case
for 10 Quinta microphone units. . . Order # 723.967
CC2/600 Charging and transport case for 10
Quinta microphone units with GM 316 Q gooseneck microphone . Order # 724.572
CD 2 Modular charging and transport unit
for 10 Quinta microphone units with GM 313, 314 or 315
gooseneck microphone . . . . . . . . . Order # 723.975
TECHNICAL SPECIFICATIONS
General
Frequency range. . . . . . . . . . . . . . . . 2400 – 2483.5 MHz
5150 – 5250 MHz 5725 – 5875 MHz
Modulation . . . . . . . . . . . . . . . . . . . Direct Sequence Spread
Spectrum DSSS (2.4 GHz;
5.8 GHz); Orthogonal Frequency Division Multiplexing OFDM (5.2 GHz) digital signal processing acc. to own standard
Max. number of audio streams. . . . . 4 useable channels per
system
Signal-to-noise ratio . . . . . . . . . . . . . 80 dB typ., (unweighted
signal-to-noise ratio) Range between microphone units
and control unit . . . . . . . . . . . . . . . . > 100 m [109.36 yds]
Power supply . . . . . . . . . . . . . . . . . . 100 – 240 V AC 50/60 Hz
Approval . . . . . . . . . . . . . . . . . . . . . world-wide
AVB
Transmission and reception
of audio data . . . . . . . . . . . . . . . . . . acc. to IEC 61883-6
Format of the audio data . . . . . . . . . AM824
Stream ID Quinta CU . . . . . . . . . . . . Bit 63 – 16 / MAC address
Bit 15 – 0 / X
Quinta MU Microphone Units
Transmitter power . . . . . . . . . . . . . . max. 20 dBm per channel
and region (average, duty
cycle 30%)*
Battery voltage . . . . . . . . . . . . . . . . . 8 NiMH cells, 2080 mAh
External DC operation . . . . . . . . . . . 15 V DC (±0.5 V),
residual hum < 20 mV,
950 mA
Charging time
with charger. . . . . . . . . . . . . . . . . . . max. 2.5 hours when the
battery is completely empty
with mains charger adapter . . . . . . . max. 2.5 hours when the
battery is completely empty
Loudspeaker. . . . . . . . . . . . . . . . . . . Wide-band, integrated
loudspeaker Volume decrease when
Mic On (“Ducking”) . . . . . . . . . . . . . 15 dB fixed setting
Headphone output. . . . . . . . . . . . . . Jack socket (3.5 mm, stereo)
Min. impedance . . . . . . . . . . . . . . . . 16 Ω
Power supply . . . . . . . . . . . . . . . . . . 9.6 V with integrated NiMH
battery (8 cells) Operating time depending on the type of
the microphone unit. . . . . . . . . . . . . approx. 20 hours in
discussion mode,
operating time also depends
on the volume Temperature range
(at < 90% humidity). . . . . . . . . . . . . +10° – +40°C
[+50 °F – +104 °F] Storage temperature
(at < 90% humidity). . . . . . . . . . . . . -20° – +55°C
[-4 °F – +131 °F] Dimensions (without microphone)
Length . . . . . . . . . . . . . . . . . . . . . . . 173 mm [6.8"]
Width. . . . . . . . . . . . . . . . . . . . . . . . 157 mm [6.18"]
Height . . . . . . . . . . . . . . . . . . . . . . . 51 mm [2.01"]
Weight. . . . . . . . . . . . . . . . . . . . . . . 1.7 kg [3.74 lbs]
*The transmitter power can differ from this value due to specific regulations in various countries.
Quinta MU 22
beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com Non-contractual illustrations. Contents subject to change without notice. E1 / Quinta MU 22 (07.12)
3 of 7
ARCHITECTS SPECIFICATIONS
The digital wireless microphone unit shall be available as delegate version without microphone for two participants. The microphone unit shall provide two buttons for each delegate for turning on/off and entering a request to speak. The microphone unit shall provide a 5-pin XLR connector with hidden locking for a gooseneck micro­phone in different lengths. The DSSS modulation shall ensure high immunity from interference in the frequency range of 2.4 / 5.2 and
5.8 GHz. The true diversity antenna technology shall ensure highest transmission reliability. The digital 128-bit encryption shall include an additional 24-bit PIN code. There shall be an automatic recognition of interferences in all frequency ranges. The silent change to an interference-free frequency range shall be automatic or manual according the EN 300328 ETSI. The audio channel allocation of the microphone units shall be processor-controlled and automatic. The high-quality plastic housing shall feature a mat black coating with Alexit soft-touch paint. The integrated wideband loudspeaker shall be used for decentral sound reinforcement. The integrated limiter shall be used against overdrive. The silicone button shall be backlit
in 3 colours and provided with Braille. The integrated rechargeable NiMH battery shall provide an operating time of max. 30 hours. The processor-controlled, intelligent charging technology shall provide a Quick-Charge function without memory effect and charge the battery within a maximum of 2.5 hours depending on the charging state. The charging status of the battery shall be monitored and transmitted to the control unit. The operating control LED shall indicate the status when the minimum capacity is too low. The microphone unit shall be provided with two nickel-plated charging contacts. The headphone output shall be a mini jack (3.5 mm) socket with adjustable control. The DC connection shall be used for battery recharging or powering via external power adapter. The dimensions (WxHxD) shall be 157x51x173mm [6.18"x2.01"x6.8"]. The weight shall be 1.7 kg [3.74 lbs].
Manufacturer: beyerdynamic Type: Quinta MU 22
Loading...
+ 4 hidden pages