BEYERDYNAMIC Orbis MU 43 ORBIS MU 43.pdf

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

Orbis MU 43

Digital Flush Mount Chairman Microphone Unit

Order # 725.730

FEATURES

• High-quality flush mounting plate with metal housing and insert
of optically hardened acrylic glass

• Round edges for flush mounting into tables

• Removable gooseneck microphone in different lengths,
with Scudio®technology, 5-pin XLR connection with hidden lock

• Red LED on the gooseneck microphone displays ready-to-speak
status

• Microphone button to turn the unit and microphone on or off

• White = microphone unit on
Green = microphone on
Red = microphone off

• Clear button to clear/deactivate all activated microphones
of the delegate units

• Configurable function button

• Voice-controlled activation of the microphone possible

• Headphone output (3.5 mm stereo jack) and buttons to set
volume or channel (Original or 1 foreign language channel)

• Two RJ45 sockets to connect to the control unit or to another
microphone unit/system unit

• Phoenix

®

connector for external loudspeaker (the loudspeaker is

automatically deactivated when the microphone is turned on)

• Configuration via Orbis CU control unit as semi-chairman micro­phone or press unit possible

1 of 9

Optional CA OL loudspeaker module,
not included

Table installation – supplied without
gooseneck microphone

Orbis MU 43

DESCRIPTION

The Orbis MU 43 flush mount chairman microphone unit is equipped
with one microphone button, clear button and configurable function
button in the mounting plate. The microphone button is used to turn
the unit and the microphone on or off. The ready-to-speak status of
the microphone is displayed by the red LED on the gooseneck
microphone and the green backlit microphone button.
The chairman does not depend upon the limited number of open
microphones (NOM). Each chairman microphone unit is perma­nently allocated to a channel (max. 8) in the system.

When using the clear button all activated delegate microphones are
turned off.

When using the function button the chairman can intervene into
the discussion and mute or clear all activated delegate microphones
depending on the system configuration.

Depending on the configuration of the Orbis CU control unit one of
the following operating modes is possible:

Normal

Each participant can turn on his/her microphone unit.

FiFo

Each participant can turn on his/her microphone. If the selected
number of open microphones (NOM) is exceeded, the microphone
of the participant who turned on his/her microphone first is turned
off when another participant turns on his/her microphone.

Voice-controlled Activation

The microphone is turned on when the participant speaks into it,
unless the number of open microphones is exceeded.

The function button is configured via the Orbis CU control unit. The
following functions are possible:

Normal:

All activated delegate microphones are cleared and the microphone
of the chairman microphone unit is turned on. The function button of
the chairman microphone unit is illuminated red. The delegates can
turn on their microphone only when the priority mode has been
finished. The chairman microphone which has automatically been
activated, remains active until the chairman turns it off by using the
microphone button.

Mute:

All active delegate microphones are muted when the chairman is
speaking. The function button of the chairman microphone unit is
illuminated red. When the priority mode is finished, all delegate
microphones that had been active before, will be activated again.
Microphones which have been activated by voice control, remain
deactivated after finishing the priority mode. The chairman micro­phone which has automatically been activated, remains active until
the chairman turns it off by using the microphone button.

The microphone unit’s design follows the UN convention on the
rights of persons with disabilities. It includes silicone buttons with
tactile feedback and Braille marking. A headphone or induction loop
for people with a hearing aid can be connected to the mini jack
output. The volume of the headphone is adjusted with a separate
control. Furthermore, by pressing the volume control the participant
can toggle between two channels (e.g. original and 1 AUX-IN e.g.
foreign language channel).

The microphone units are connected in a daisy chain to the Orbis CU
control unit, i.e. the first microphone unit is connected to the
control unit, the second microphone unit is connected to the first,
the third microphone unit to the second and so on. For connection
standard Cat5 cables are used. Thus, one cable ensures the audio
transmission, power supply and control. The microphone units are
very economical and use less than 1 watt in operation and at
maximum volume.

Connection to a control unit without redundancy

A maximum of 50 microphones can be connected to one line of
the Orbis CU control unit, i.e. a total of 100 microphone units can
be operated with one Orbis CU control unit.

Connection to a control unit with redundancy

A maximum of 50 microphone units is connected in a ring to the
Orbis CU control unit, i.e. the last microphone unit is connected to
the previous microphone unit and the control unit. The redundancy
provides maximum reliablility. Should a defect in a cable occur at
one side of the microphone unit, the microphone unit will not fail
to operate, because it will still be supplied via the cable from the
other side. The cable in question or a defect microphone unit as
well can be replaced during operation without causing any
problems with the other microphone units.

An optional external loudspeaker can be connected to the Phoenix

®

connector.

The rounded edges allow the microphone unit to be flush mounted
into a table.

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

2 of 9

SUPPLIED ACCESSORIES

1 x Mounting bracket incl. adjusting screw

TECHNICAL SPECIFICATIONS

General

Voltage supply

via control unit. . . . . . . . . . . . . . Bus voltage (48 V DC)

Power consumption . . . . . . . . . . max. 1 W

Temperature range

(humidity < 90%) . . . . . . . . . . . +10 °C to +40 °C

[+50 °F to +104 °F]
Storage temperature

(humidity < 90%) . . . . . . . . . . . -20 °C to +55 °C

[-4 °F to +131 °F]

Connections

System connection. . . . . . . . . . . 2x RJ45 socket

(not for Ethernet)
Max. cable length

Line CU – MU . . . . . . . . . . . . . . 80 m [87.49 yd] with AWG 24

Max. cable length

Line MU – MU . . . . . . . . . . . . . . 80 m [87.49 yd] with AWG 24

Specification line cable. . . . . . . . CAT5 S/UTP, cross-section min.

AWG 26

Specification line connector. . . . . RJ45 acc. to EIA/TIA 568 B,

shielded

Loudspeaker output. . . . . . . . . . Phoenix®connectors,

contact spacing 3.5 mm

Min. output impedance . . . . . . . 4 Ω

Headphone output . . . . . . . . . . Mini jack socket (3.5 mm stereo)

Min. output impedance . . . . . . . 16 Ω, short-circuit proof

Frequency response . . . . . . . . . . 20 - 15,000 Hz

Microphone

Connector . . . . . . . . . . . . . . . . . 5-pin XLR male

Pin 1 = GND (ground)

Pin 2 = Audio +

Pin 3 = Audio -

Pin 4 = LED -

Pin 5 = LED Power (+5 V)

AB powering . . . . . . . . . . . . . . . 2.2 V (2.2 kΩ)

Classis GM 313 Q - GM 316 Q Microphone

Polar pattern . . . . . . . . . . . . . . . Cardioid

Frequency response . . . . . . . . . . 50 - 19,000 Hz

S/N ratio . . . . . . . . . . . . . . . . . . 69 dB(A) / 6µV(A)

Max. SPL . . . . . . . . . . . . . . . . . . 107 dB (equalised)

GM 115 Q Microphone

Polar pattern . . . . . . . . . . . . . . . Cardioid

Frequency response . . . . . . . . . . 100 - 15,000 Hz

Max. SPL . . . . . . . . . . . . . . . . . . 100 dB (equalised)

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43
(01.15)

3 of 9

OPTIONAL ACCESSORIES

Gooseneck microphones

Classis GM 115 Q Condenser gooseneck microphone

(electret), cardioid, matt black,

500 mm [19.69"]. . . . . . . . . . Order # 726.095

Classis GM 313 Q Condenser gooseneck microphone

(electret), with Scudio

®

technology,
cardioid, matt black,

300 mm [11.81"]. . . . . . . . . . Order # 724.203

Classis GM 314 Q same as above,

but 400 mm [15.75"] . . . . . . . Order # 724.211

Classis GM 315 Q same as above,

but 500 mm [19.69"] . . . . . . . Order # 724.238

Classis GM 316 Q same as above,

but 600 mm [23.62"] . . . . . . . Order # 724.351

Cables

CA OC 1 System cable, CAT5 with

RJ45 connector, 1 m [3.28 ft] . Order # 725.811

CA OC 2 same as above,

but 2.5 m [8.20 ft] . . . . . . . . . Order # 725.838

CA OC 5 same as above,

but 5 m [16.4 ft] . . . . . . . . . . . Order # 725.846

CA OC 10 same as above,

but 10 m [32.81 ft] . . . . . . . . . Order # 725.854

CA OC 20 same as above,

but 20 m [65.62 ft] . . . . . . . . . Order # 725.862

CA OC 50 same as above,

but 50 m [54.68 yd] . . . . . . . . Order # 725.889

IL 200 Induction loop,

cable length 20 cm [7.87"],
extension cable 77 cm [30.31"],
mini stereo jack plug

(3.5 mm) . . . . . . . . . . . . . . . . Order # 725.161

OPTIONAL ACCESSORIES

Loudspeaker

CA OL Loudspeaker module for

Orbis MU 41/43 and Orbis SU 63. . Order # 725.765

ARCHITECT’S SPECIFICATIONS

The wired digital built-in microphone unit shall be used as a
delegate version without microphone. The high-quality mounting
plate shall be provided with an insert made of optically hardened
acrylic glass. Rounded corners shall ensure a flush-mount table
installation. The 5-pin XLR connector with hidden lock shall connect
gooseneck microphones with integrated LED ring in different lengths.
The microphone unit shall be provided with three soft touch buttons
with tactile feedback for turning the microphone on/off, for clearing
all active delegate microphone units and for the priority (mute or
normal) or a freely programmable function in conjunction with the
serial interface on the control unit. The buttons shall be backlit in
three colours and labelled with braille writing.
The chairman microphone unit shall not depend on the maximum
number of open microphones (NOM). Each chairman microphone
unit shall be allocated to a fixed channel in the system (max. 8).
The microphone unit shall have a headphone output (3.5 mm
stereo jack) and soft touch buttons for setting the volume and
channel (original and 1 foreign language channel), as well as a
Phoenix connector for an external loudspeaker.
The microphone unit shall be connected via two RJ45 sockets to
the control unit or another microphone/system unit.
Dimensions (LxWxH): 148 x 113 X 37 mm.

Manufacturer: beyerdynamic
Type: Orbis MU 43

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43
(01.15)

4 of 9

All dimensions in mm and [inch]

DIMENSIONS

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

5 of 9

GM 31X Q GOOSENECK MICROPHONE

DESCRIPTION

The GM 31x gooseneck microphone is available as optional
accessory to connect to the microphone unit.
Due to the cardioid polar pattern this microphone has a high gain
before feedback and provides highest intelligibility of speech.
The LED ring displays the ready-to-talk status of the microphone.
Inside the microphone there is a filter to eliminate wind and pop
noise.
The microphone features the innovative Scudio™ technology,
making the microphones absolutely insensitive to wireless
communication devices such as mobile phones.
The microphone is mounted on a 6 mm thick gooseneck and due to
its mat black, non-glare surface almost invisible.

The following lengths are available:
GM 313 Q = 300 mm [11.81"]
GM 314 Q = 400 mm [15.75"]
GM 315 Q = 500 mm [19.69"]
GM 316 Q = 600 mm [23.62"]

TECHNICAL SPECIFICATIONS

Transducer type . . . . . . . . . . . . . . . . Condenser (electret)

Operating principle. . . . . . . . . . . . . . Pressure gradient

Frequency response . . . . . . . . . . . . . 50 - 19,000 Hz

Polar pattern . . . . . . . . . . . . . . . . . . Cardioid

Open circuit voltage at 1 kHz . . . . . . 17 mV/Pa

Nominal impedance . . . . . . . . . . . . . < 200 Om

Loead impedance . . . . . . . . . . . . . . . ≥ 1 kOhm

Max. SPL . . . . . . . . . . . . . . . . . . . . . 107 dB [SPL @ 1% THD]

Signal-to-noise ratio/Noise voltage . . 69 dB [A] / 6.0 µV [A]

Equivalent SPL . . . . . . . . . . . . . . . . . 25 dB[A]

Microphone connection . . . . . . . . . . 5-pin XLR (male)

Head diameter with pop shield. . . . . approx. 26 mm [1.02"]

without pop shield . . . . . . . . . . . . . . approx. 13.6 mm [0.56"]

Gooseneck diameter . . . . . . . . . . . . 6 mm [0.24"]

Total length

GM 313 Q . . . . . . . . . . . . . . . . . . . . 270 mm [16.63"]

GM 314 Q . . . . . . . . . . . . . . . . . . . . 370 mm [14.57"]

GM 315 Q . . . . . . . . . . . . . . . . . . . . 470 mm [18.5"]

GM 316 Q . . . . . . . . . . . . . . . . . . . . 570 mm [22.44"]

GM 313 Q GM 314 Q GM 315 Q GM 316 Q

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

6 of 9

POLAR PATTERN

GM 31X Q MICROPHONE

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

7 of 9

ARCHITECT’S SPECIFICATIONS

The cardioid condenser gooseneck microphone (electret) shall be
connected to the Quinta desktop microphone unit. The LED ring
integrated in the microphone head shall indicate the ready-to-speak
status. The filter in the microphone basket shall suppress wind and
pop noise. The Scudio®technology shall eliminate interferences
from other wireless communication devices. The housing shall be
coated with a non-glare mat black paint. The gooseneck diameter
shall be 6 mm [0.24"]. The total length shall be 300 mm [11.81"]
when connected to the microphone unit (measured from the table’s
edge). The delivery shall include a wind shield.

Manufacturer: beyerdynamic
Type: Classis GM 313 Q

The cardioid condenser gooseneck microphone (electret) shall be
connected to the Quinta desktop microphone unit. The LED ring
integrated in the microphone head shall indicate the ready-to-speak
status. The filter in the microphone basket shall suppress wind and
pop noise. The Scudio®technology shall eliminate interferences
from other wireless communication devices. The housing shall be
coated with a non-glare mat black paint. The microphone shall be
provided of two goosenecks with a diameter of 6 mm [0.24"] and
a rigid tube in between. The total length shall be 400 mm [15.75"]
when connected to the microphone unit (measured from the table’s
edge). The delivery shall include a wind shield.

Manufacturer: beyerdynamic
Type: Classis GM 314 Q

The cardioid condenser gooseneck microphone (electret) shall be
connected to the Quinta desktop microphone unit. The LED ring
integrated in the microphone head shall indicate the ready-to-speak
status. The filter in the microphone basket shall suppress wind and
pop noise. The Scudio

®

technology shall eliminate interferences
from other wireless communication devices. The housing shall be
coated with a non-glare mat black paint. The microphone shall be
provided of two goosenecks with a diameter of 6 mm [0.24"] and
a rigid tube in between. The total length shall be 500 mm [19.69"]
when connected to the microphone unit (measured from the table’s
edge). The delivery shall include a wind shield.

Manufacturer: beyerdynamic
Type: Classis GM 315 Q

The cardioid condenser gooseneck microphone (electret) shall be
connected to the Quinta desktop microphone unit. The LED ring
integrated in the microphone head shall indicate the ready-to-speak
status. The filter in the microphone basket shall suppress wind and
pop noise. The Scudio®technology shall eliminate interferences
from other wireless communication devices. The housing shall be
coated with a non-glare mat black paint. The microphone shall be
provided of two goosenecks with a diameter of 6 mm [0.24"] and
a rigid tube in between. The total length shall be 600 mm [23.62"]
when connected to the microphone unit (measured from the table’s
edge). The delivery shall include a wind shield.

Manufacturer: beyerdynamic
Type: Classis GM 316 Q

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

8 of 9

DESCRIPTION

The Classis GM 115 Q gooseneck microphone is used for direct
connection to the Quinta or Orbis microphone units.
The microphone features a cardioid polar pattern with a high gain
before feedback. The ready-to-speak status of the microphone is
displayed by an LED ring. Inside the microphone grille there is a
filter to eliminate wind or pop noise.
The microphone is mounted on a 6 mm thick gooseneck and due
to its mat black, non-glare surface it discretely blends into the
environment.

TECHNICAL SPECIFICATIONS

Transducer type . . . . . . . . . . . . . . . . Condenser (electret)

Operating principle. . . . . . . . . . . . . . Pressure gradient

Frequency response

Close miking . . . . . . . . . . . . . . . . . . 40 - 13,000 Hz

Distant miking (distance 1 m) . . . . . . 200 - 13,000 Hz

Polar pattern . . . . . . . . . . . . . . . . . . Cardioid

Open circuit voltage at 1 kHz . . . . . . -17.8 mV/Pa = -35 dBV ±3 dB*

Nominal impedance . . . . . . . . . . . . . 2.2 kΩ

Max. SPL . . . . . . . . . . . . . . . . . . . . . 112 dB [SPL @ 1% THD]*

Signal-to-noise ratio . . . . . . . . . . . . . 62 dB [A, rms]*

Equivalent SPL . . . . . . . . . . . . . . . . . 32 dB [A, rms]*

Power supply . . . . . . . . . . . . . . . . . . 1.5 - 9 V DC

Microphone connection . . . . . . . . . . 5-pin XLR (male)

Head diameter with pop shield. . . . . approx. 25 mm [0.98"]

without pop shield . . . . . . . . . . . . . . approx. 14 mm [0.55"]

Gooseneck diameter . . . . . . . . . . . . approx. 7 mm [0.28"]

Total length . . . . . . . . . . . . . . . . . . . approx. 470 mm [18.5"]

Weight. . . . . . . . . . . . . . . . . . . . . . . approx. 110 g [3.8 oz]

*depending on the connected electronics

ARCHITECT’S SPECIFICATIONS

The condenser gooseneck microphone (electret) with cardioid polar
pattern shall be used for direct connection to Quinta and Orbis
microphone units. A filter inside the microphone grille shall eliminate
wind or pop noise. It shall be protected against interference from
wireless communication devices. The fully metal housing shall be
matt black. The two flexible goosenecks (8 mm bottom, 6 mm top)
shall have a rigid tube in between. The total length when mounted
to a microphone unit shall be 500 mm (measured from the edge of
the table). It shall be supplied with a wind shield.

Manufacturer: beyerdynamic
Type: Classis GM 115 Q

Classis GM 115 Q without pop shield

Classis GM 115 Q with pop shield

GM 115 Q GOOSENECK MICROPHONE

Orbis MU 43

beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / Orbis MU 43 (01.15)

9 of 9

WIRING DIAGRAM

DIMENSIONS

FREQUENCY RESPONSE & POLAR PATTERN

This polar pattern and frequency response curve (measuring tolerance ±3 dB) correspond to a typical production sample for this microphone.

Frequency response curve ±3 dB GM 115 Q 0 dB = 17.8 mV/Pa