Beyerdynamic DT 287, DT 250, DT 297, DT 280, DT 290 User Manual

...
DT 250/252
Studiokopfhörer Professional Headphone Casque de Studio
DT 280 DT 290 DT 291 DT 287 DT 297
Hör-Sprechgarnitur Headset Micro-casque
Bedienungsanleitung
Operating Instructions
Notice d’utilisation
BEDIENUNGSANLEITUNG DT 200-SERIE
OPERATING INSTRUCTIONS DT 200-SERIES
NOTICE D’UTILISATION SERIES DT 200
deutschenglishfrançais
3
INHALT / CONTENTS / SOMMAIRE
Charakteristik. . . . . . . . . . . . . . . . . . . . . . . . Seite 4
Anschluss . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 4
Anwendung . . . . . . . . . . . . . . . . . . . . . . . . . Seite 5
Pflege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 6
Sicherheitshinweis . . . . . . . . . . . . . . . . . . . . Seite 7
Ausführungen . . . . . . . . . . . . . . . . . . . . . . . Seite 7
Ersatzteile. . . . . . . . . . . . . . . . . . . . . . . . . . . Seite 8
Optionales Zubehör . . . . . . . . . . . . . . . . . . Seite 8
Technische Daten. . . . . . . . . . . . . . . . . . . . . Seite 9
Design Features . . . . . . . . . . . . . . . . . . . . . . Page 16
Connection. . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
Spares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 20
Optional Accessories . . . . . . . . . . . . . . . . . . Page 20
Technical Specifications. . . . . . . . . . . . . . . . Page 21
Description. . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Branchements . . . . . . . . . . . . . . . . . . . . . . . Page 28
Utilisation. . . . . . . . . . . . . . . . . . . . . . . . . . . Page 29
Entretien . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 30
Sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
Modèles . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
Pièces de rechange . . . . . . . . . . . . . . . . . . . Page 32
Accessoires en option . . . . . . . . . . . . . . . . . Page 32
Spécifications techniques . . . . . . . . . . . . . . Page 33
4
BEDIENUNGSANLEITUNG DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Sie haben sich für einen Studiohörer der DT 250-Serie
bzw. für eine Hör-Sprechgarnitur der DT 290-Serie von beyer­dynamic ent schie d en. Wir danken für Ihr Ver trauen. Äußerste Präzision bei der Ferti gung und eine strenge Quali täts kontrolle garan tieren die Zu ver lässigkeit und den hohen Komfort, die Sie von beyerdynamic-Produkten erwarten dürfen.
Charakteristik
DT 250 / DT 252
Der geschlossene Studiohörer DT 250 / DT 252 bietet
eine gute Isolation von Außengeräuschen. Er eignet sich daher für den Einsatz als Kontrollhörer in Tonstudios, bei Rundfunk und Fernsehen. Auswechselbare, weiche Ohr- und Kopfpolster bieten einen hohen Langzeit-Tragekomfort. Das leistungsstarke Neodym-Magnetsystem sorgt für eine hohe Wiedergabepräzi­sion und ein ausgewogenes, weiträumiges Klangbild. Die Stan ­dard impedanz beträgt 80 Ω. Für höchste Wiedergabetreue ist ein besonders aufwendig konstruiertes System mit 250 Ω lie­ferbar. Die Anschlusskabel zu den Hörmuscheln sind geschützt im Kopfbügel geführt. Das Hauptanschlusskabel ist steckbar und wird einseitig geführt.
DT 280 / DT 290
Wie DT 250, jedoch mit dem dynamischen Mikrofon
DM 290 in Hypernierencharakteristik. Die Hör-Sprechgarnitur DT 280 / DT 290 können Sie für Reportage- und Kommando­zwecke bei Rundfunk und Fernsehen einsetzen. Die Hör­Sprechgarnitur DT 280 / DT 290 V.11 besitzt einen eingebauten Mikro fon vorverstärker für die Tonaderspeisung.
DT 291 / DT 297
Wie DT 250, jedoch mit einem Elektret-Kondensator-
Mikrofon in Kugelcharakteristik (DT 291) bzw. in Nieren charak ­teristik (DT 297). Die Hör-Sprechgarnitur DT 291 PV / DT 297 PV ist mit einem einge bautem Vorverstärker für Phantomspeisung ausgerüstet. Die Hör-Sprechgarnitur DT 297 V.11 besitzt einen eingebauten Mikro fon vorverstärker für die Tonaderspeisung.
Anschluss
Der Studiohörer DT 250 / DT 252 wird mit passendem
Anschlusskabel geliefert. Die Hör-Sprech garnituren DT 280 / DT 290 / DT 291 / DT 297 werden standardmäßig ohne Anschlusskabel geliefert. Passende Kabel finden Sie unter „Optionales Zubehör“. Bei den Kabeln mit freien Enden kön-
deutsch
5
nen Sie die gewünschten Stecker direkt an das Kabel löten (Anschlussbelegung siehe „Blockschaltbild”). Auf Wunsch wer­den die benötigten Stecker auch im Werk montiert. Schließen Sie den Studiohörer bzw. die Hör-Sprechgarnitur an hochwertige Geräte mit der entspre
chen den Impe danz und Belastbarkeit an. Bei der Hör-Sprechgarnitur DT 280 / DT 290 / DT 290 V.11 ist das Mikrofon symmetrisch herausgeführt. Es kann aber auch an ei ­nen unsymmetrischen Mikrofoneingang angeschlossen werden. Für symmetrische Mikrofoneingänge mit Phantomspeisung sind die Hör-Sprechgarnituren DT 291 PV, DT 297 PV geeignet. Der Mikrofonpegel beträgt bei Besprechung aus 5 cm Entfer nung 13 mV bzw. 250 mV. Für den Anschluss an Fernsehkameras mit Mikrofoneingang, welcher für Tonaderspeisung ausgelegt ist, verwenden Sie die Hör-Sprech garnitur DT 280/DT 290 V.11 oder DT 287/DT 297 V.11 mit integriertem Vor verstärker. Der Mikrofonpegel ist b
ei Besprechen aus 5cm Entfernung bei normaler Sprech lautstärke von 52 mV bis 1,3 V regelbar. Die Speisespannung für den Vorverstärker kann zwischen 6 - 27 V variieren, wobei die Strom aufnahme sich wie folgt ergibt:
DT 290 V.11 DT 297 V.11
6V R
vor
330 Ω 8 mA 6 mA
12 V R
vor
330 Ω 23 mA 20 mA
20 V R
vor
330 Ω 43 mA 40 mA
27 V R
vor
330 Ω 61 mA 57 mA
Anwendung
Der verstellbare Kopfbügel kann jeder Kopfgröße an -
ge passt werden. Bei der Hör-Sprechgarnitur ist das Mikrofon ab Werk links montiert. Das Anschlusskabel zum Mikrofon ist ver ­deckt im Kopfbügel geführt. Bei Bedarf können Sie die Mikro ­fonhalterung ummontieren, so dass Sie das Mikrofon auch rechts tragen können.
L
1. Schutzdeckel vorsichtig
abnehmen (z.B. mit kleinem Schraubendreher).
6
Wird der Kopfhörer im Stereobetrieb benutzt, sollten im Stecker die Anschlussdrähte für links und rechts getauscht werden, d.h. braun/orange (links) gegen rot/blau (rechts). Anschlussbelegung siehe „Blockschaltbild“. Das Mikrofon soll­ten Sie im Abstand von 2 - 3 cm neben dem Mundwinkel pla­zieren. So werden Poppgeräusche minimiert.
Pflege
Aus hygenischen Gründen sollten Sie den Kopfhörer
von Zeit zu Zeit mit einem weichen, feuchten Tuch reinigen. Ver wen den Sie nur milde Reinigungsmittel (Geschirrspül­mittel), auf keinen Fall lösemittelhaltige Reiniger. Achten Sie darauf, dass kein Wasser in den Wandler läuft. Bei den Hör-Sprechgarnituren können Sie den Poppschutz im warmen Wasser spülen. Achten Sie beim Einsetzen bzw. Aufsetzen auf das Mikrofon darauf, dass der Poppschutz voll­ständig trocken ist. Da die Ohrpolster einem natürlichen Verschleiss unterliegen, sollten Sie sie gelegentlich austauschen:
L
L
L
2. Schrauben lösen
und Mikrofonhalterung abnehmen.
Nur V.11-Version des DT 287/DT 297:
Trimmer zur Einstellung des eingebauten Mikrofonvorverstärkers.
3. Mikrofonhalterung um 90
0
drehen. Schrauben fest ziehen und Schutzdeckel aufsetzen.
deutsch
7
1. Ohrpolster am Plastikring anfassen und vom Gehäuseteil ziehen.
2. Neues Ohrpolster so aufsetzen, dass die Rastnasen in die vorgesehenen Löcher einrasten können.
3. Neues Ohrpolster fest an das Gehäuseteil drücken, bis es hörbar einrastet.
Die modulare Bauweise der Kopfhörer ist besonders service­freundlich, denn alle Teile können leicht ausgewechselt wer­den.
Sicherheitshinweis
Wenn Sie den Studiohörer bzw. die Hör-Sprechgarnitur
an Ihren Verstärker anschließen, achten Sie darauf, dass die Laut stärke (Volume) zunächst auf Mini mum gedreht ist. Regeln Sie die Lautstärke erst nach Aufsetzen des Kopfhörers. Im allgemeinen wird mit Kopfhörern lauter abgehört als mit Lautsprechern. Hohe Lautstärken können, sofern sie über län­gere Zeit auf das Ohr einwirken, zu dauerhaften Hörschäden führen. Schonen Sie Ihr gesundes Ohr - auch bei niedriger Laut ­stärke haben beyerdynamic-Kopfhörer Ihren vollen Klang.
Ausführungen
DT 250 Studio-Kopfhörer, 80 Ω, schwarz, mit
Wendelkabel WK 250.07, steckbar (Stereoklinke 3,5 mm /
Adapter 6,35 mm), . . . . . . . . . . Best.-Nr. 442.844
DT 250 Studio-Kopfhörer, 250 Ω, schwarz, mit
Wendelkabel WK 250.07, steckbar (Stereoklinke 3,5 mm /
Adapter 6,35 mm) . . . . . . . . . . . Best.-Nr. 443.530
DT 252 Studio-Kopfhörer (Ein-Ohr-Version),
80 Ω, schwarz, mit Wendelkabel WK 250.07, steckbar (Stereoklinke 3,5 mm / Adapter 6,35 mm) . . . Best.-Nr. 445.177
DT 280 Einohr/Hör-Sprechgarnitur,
200/80 Ω . . . . . . . . . . . . . . . . . . Best.-Nr. 441.309
DT 280 dito, jedoch 200/250 Ω . . . . . . . Best.-Nr. 447.269
DT 280 V.11 Einohr/Hör-Sprechgarnitur, 200/80 Ω
mit eingebautem
Vorverstärker . . . . . . . . . . . . . . . Best.-Nr. 442.860
DT 290 Hör-Sprechgarnitur, 200/80 Ω . Best.-Nr. 441.317
DT 290 dito, jedoch 200/250 Ω . . . . . . . Best.-Nr. 447.277
DT 290 V.11 Hör-Sprechgarnitur, 200/80 Ω
mit eingebautem
Vorverstärker . . . . . . . . . . . . . . . Best.-Nr. 441.384
DT 291 PV Hör-Sprechgarnitur, 80 Ω, Kond.-Mikrofon
(Kugel), mit eingeb. Vorverstärker für
Phantomspeisung . . . . . . . . . . . Best.-Nr. 447.129
8
DT 291 PV dito, jedoch 250 Ω . . . . . . . . . . Best.-Nr. 447.137
DT 287 PV Ein-Ohr-Version, 80 Ω,
Kond.-Mikrofon (Niere). . . . . . . Best.-Nr. 479.349
DT 287 V.11 Ein-Ohr-Version, 80 Ω,
Kond.-Mikrofon (Niere). . . . . . . Best.-Nr. 479.357
DT 297 PV Hörsprechgarnitur, 80 Ω, Kond.-Mikrofon
(Niere), für Phantomspeisung
12 - 48 V . . . . . . . . . . . . . . . . . . . Best.-Nr. 479.365
DT 297 PV dito, jedoch 250 Ω . . . . . . . . . . Best.-Nr. 479.454
DT 297 V.11 Hörsprechgarnitur, 80 Ω,
mit eingebautem
Mikrofonvorverstärker, . . . . . . . Best.-Nr. 479.462
Ersatzteile
BN 59-59/A Kopfpolster . . . . . . . . . . . . . . . . Best.-Nr. 503.886
EDT 250 V Ohrmuschelsatz
Velour, für DT 25*/28*/29* . . . . Best.-Nr. 942.704
EDT 250 S Ohrmuschelsatz
Softskin, für DT 25*/28*/29*. . . Best.-Nr. 943.549
WS 97 AZ Windschutz, anthrazit . . . . . . . . Best.-Nr. 465.313
Optionales Zubehör
WK 250.07 Wendel-Anschlusskabel für DT 25*
mit 3,5/6,35 mm Stereo-
Klinkenstecker . . . . . . . . . . . . . . Best.-Nr. 442.070
K 190.00 Anschlusskabel für DT 28*/DT29*,
1,5 m, mit freien Enden . . . . . . Best.-Nr. 431.575
K 190.00 Anschlusskabel für DT 28*/DT29*,
3 m, mit freien Enden . . . . . . . . Best.-Nr. 441.937
K 190.28 Anschlusskabel für DT 28*/DT29*,
1,5 m, mit 4-pol. XLR-Buchse . . Best.-Nr. 445.304 K 190.39 Anschlusskabel für V.11-Version
der DT 29*-Serien, mit 5-pol.
XLR-Stecker zum Anschluss an
Profi-Kameras (Sony, Philips, Ikegami),
1,5 m. . . . . . . . . . . . . . . . . . . . . . Best.-Nr. 475.181
K 190.40 Anschlusskabel für DT 28*/DT29*, 1,5 m,
mit 3-pol. XLR-Stecker und
6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr. 445.894
K 190.40 Anschlusskabel für DT 28*/DT29*, 3 m,
mit 3-pol. XLR-Stecker und
6,35 mm-Stereo-Klinke . . . . . . . Best.-Nr. 446.750
K 190.41 Anschlusskabel für DT 28*/DT29*, 1,5 m,
mit 5-pol. XLR-Stecker . . . . . . . . Best.-Nr. 445.312
K 190.48 Anschlusskabel für DT 280/DT 290
mit 2 x 3,5 mm Stereoklinken-
stecker zum Anschluss an
PC Soundkarten (Achtung:
Keine Phantomspeisung) . . . . . Best.-Nr. 479.470
9
WK 190.00 Wendel-Anschlusskabel für
DT 28*/DT29*,
3 m, mit freien Enden . . . . . . . . Best.-Nr. 448.176
Technische Daten
DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Hörer
Übertragungsbereich . . . . 10 - 30.000 Hz
(bei Hör-Sprechgarnituren auf beste
Verständlichkeit optimiert)
Nennimpedanz . . . . . . . . . 80 Ω / 250 Ω
Kennschalldruckpegel
bei 1 kHz . . . . . . . . . . . . . . 100 dB SPL bei 1 mW 0,28 V an
80 Ω
100 dB SPL bei 1 mW 0,5 V an
250 Ω
Nennbelastbarkeit . . . . . . 100 mW 120 dB 2,8 V an 80 Ω
100 mW 120 dB 5 V an 250 Ω Isolierung von
Außengeräuschen. . . . . . . ca. 16 dBA
Andruckkraft. . . . . . . . . . . 4,5 N
Gewicht (ohne Kabel) DT 250 / DT 290 / DT 294 /
DT 297 . . . . . . . . . . . . . . . . 240 g
DT 252 / DT 280 / DT 287 . 170 g
Schaltbild DT 250
deutsch
=
^
=
^
=
^
=
^
=
^
=
^
10
DT 280 / DT 290 Mikrofon
Wandlerprinzip . . . . . . . . . . . . dynamisch
Übertragungsbereich . . . . . . . 40 - 12.000 Hz
Richtcharakteristik . . . . . . . . . Hyperniere
Störschallauslöschung. . . . . . . 30 dB
Ausgangsspannung bei Besprechung aus
5 cm Entfernung . . . . . . . . . . . ca. 3 mV
Nennimpedanz . . . . . . . . . . . . ca. 200 Ω
Gewicht . . . . . . . . . . . . . . . . . . ca. 45 g
Frequenzkurve
Schaltbild
Richtdiagramm
deutsch
11
DT 290 V.11 Mikrofon
Wandlerprinzip . . . . . . . . . . . . dynamisch
Übertragungsbereich . . . . . . . 40 - 12.000 Hz
Richtcharakteristik . . . . . . . . . Hyperniere
Ausgangsspannung bei Besprechung aus 5 cm Entfernung, Is = 16 mA,
Us = 10 V, Rv = 330 Ω . . . . . . . ca. 1,5 V
Besprechung aus 5 cm Entfernung, Is = 16 mA, Us = 10 V, Rv = 330 Ω,
RLS = 200 Ω. . . . . . . . . . . . . . . . ca. 750 mV
Nennimpedanz . . . . . . . . . . . . ca. 200 Ω
Stromaufnahme min. . . . . . . . 8 mA
Stromaufnahme max. . . . . . . . 56 mA
Gewicht . . . . . . . . . . . . . . . . . . ca. 45 g
Frequenzkurve
Schaltbild
Richtdiagramm
12
DT 291 PV Mikrofon
Wandlerprinzip . . . . . . . . . . . . Kondensator (Back-Elektret)
Übertragungsbereich . . . . . . . 20 - 18.000 Hz
Richtcharakteristik . . . . . . . . . Kugel
Ausgangsspannung bei Besprechung aus
5 cm Entfernung . . . . . . . . . . . ca. 13 mV
Nennimpedanz . . . . . . . . . . . . 200 Ω
Nennabschlussimpedanz. . . . . 1000 Ω
Max. Schalldruckpegel . . . . . . 127 dB
Stromaufnahme . . . . . . . . . . . ca. 3,5 mA
Phantomspeisung . . . . . . . . . . 12 - 48 V
Gewicht . . . . . . . . . . . . . . . . . . ca. 20 g
Frequenzkurve
Schaltbild
Richtdiagramm
Sollfrequenzkurve ± 2,5 dB 0 dB = 6 mV/Pa
deutsch
13
DT 287 PV / DT 297 PV Mikrofon
Wandlerprinzip . . . . . . . . . . . . Kondensator (Back-Elektret)
Übertragungsbereich . . . . . . . 40 - 20.000 Hz
Richtcharakteristik . . . . . . . . . Niere
Ausgangsspannung bei Besprechung aus
5 cm Entfernung . . . . . . . . . . . 5,5 mV
Nennimpedanz . . . . . . . . . . . . 300 Ω
Nennabschlussimpedanz. . . . . 1000 Ω
Max. Schalldruckpegel . . . . . . 132 dB
Geräuschspannungsabstand. . 62 dB
Stromaufnahme . . . . . . . . . . . ca. 3,5 mA
Phantomspeisung . . . . . . . . . . 12 - 48 V
Gewicht . . . . . . . . . . . . . . . . . . ca. 30 g
Frequenzkurve
Schaltbild
Richtdiagramm
Sollfrequenzkurve ± 2,5 dB 0 dB = 5 mV/Pa
14
DT 287 V. 11 / DT 297 V.11 Mikrofon
Wandlerprinzip . . . . . . . . . . . . Kondensator (Back-Elektret)
Übertragungsbereich . . . . . . . 20 - 20.000 Hz
Richtcharakteristik . . . . . . . . . Niere
Ausgangsspannung bei Besprechung aus
5 cm Entfernung . . . . . . . . . . . ca. 52 mV - 1,3 V regelbar
Nennimpedanz . . . . . . . . . . . . 300 Ω
Stromaufnahme . . . . . . . . . . . 6 - 56 mA
Schaltbild
16
OPERATING INSTRUCTIONS DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Thank you for selecting one of the DT 200 series
professional studio headphones or headsets. They have been made in Germany from high-grade materials and assembled under stringent quality and performance tests to provide you with a professional communications tool. Please take some time to read through this instruction booklet to give you an idea of the design criterion and some information on connection, use and maintenance.
Design Features
DT 250 / DT 252
The DT 250 / DT 252 is a closed dynamic headphone
offering excellent ambient noise isolation making it suitable for all kinds of applica tions in broadcasting and recording studios. The headband and earphone cushioning systems have been carefully designed for maximum comfort and unobtrusive style. The powerful neodymium magnet system provides high-fidelity reproduction and a balanced sound. The standard impedance is 80 Ω. Furthermore, versions with 250 Ω systems are available. The connecting cables to the ear monitors run safely in the headband and the main connecting cable is terminated on one side with a multi-pin connector.
DT 280 / DT 290
Same as DT 250, but featuring the dynamic hypercardioid
DM 290 microphone. The DT 280/DT 290 headset is used in intercom and talkback systems as well as other applications where a dynamic microphone is required. The DT 280/DT 290 V.11 has an integrated microphone preamp for AB-powering.
DT 291 / DT 297
Same as DT 250, but featuring an omnidirectional
electret condenser microphone (DT 291) or a cardioid condenser microphone (DT 297). The DT 291 PV / DT 297 PV is equipped with an integrated preamp for phantom powering. The DT 297 V.11 has an integrated microphone preamp for AB­powering.
Connection
The DT 250 / DT 252 headphones are supplied with an
appropriate connecting cable. The the DT 280 / DT 290 / DT 291 / DT 287 / DT 297 headsets are supplied without connecting cable. For appropriate connecting cables, please refer to “Optional Accessories”. Direct solder connections can be made to all cables with free ends (for cable connection refer to ”Block Diagram”).
english
17
Upon request the required plugs can be connected at the fac­tory. It is important that the external equipment the studio head­phones or the headsets will be connected to are of good quality and of the correct impedance and power ratings to get the best performance from them. Please refer to the ”Technical Specifications” for detailed information. The microphone of the DT 280 / DT 290 headset is designed for balanced connection. But it can be also connected to unbalanced microphone inputs. The DT 291 PV or DT 297 PV headsets are suitable for the connection to balanced microphone inputs with phantom power. At a distance of 5 cm the microphone level is 13 mV or 250 mV. Use the DT 280/DT 290 V.11 or DT 287/DT 297 V.11 headset with integrated preamp for connecting to TV cameras with a micro­phone input for AB-powering. At a distance of 5 cm the micro­phone level can be adjusted between 52 mV and 1.3 V at normal speech volumes. The supply voltage for the pre-amplifier can vary between 6 - 27 V. The power consumption is at:
DT 290 V.11 DT 297 V.11
6V R
vor
330 Ω 8 mA 6 mA
12 V R
vor
330 Ω 23 mA 20 mA
20 V R
vor
330 Ω 43 mA 40 mA
27 V R
vor
330 Ω 61 mA 57 mA
Operation
The head phones are fully adjustable and should be
positioned for the best fit over the ears. This will give maximum long-term comfort and will minimise sound leakage or spill. Convention states that the boom microphone is placed over the left ear. The microphone can be used from the right ear, but if true L and R headphone status needs to be maintained, it will be necessary to make a custom lead with the headphone connections reversed (swap brown/orange on the left side and red/blue on the right side). For con nections refer to ”Block Diagram”.
1. Lift cap with
small screwdriver.
L
18
The microphone should be positioned to the side of the mouth, about 20-30 mm forward. This will keep it within the direct sound path but out of breath stream, therefore minimising any ‘pop’ sounds.
Maintenance
As with any equipment which will be used in close
proximity to sensitive parts of the body, it is essential that the ear pads, the headband and the microphone pop-shield are kept clean. Use a damp cloth for cleaning the ear-pads and headband using only gentle cleansing agents (such as washing­up liquid). Take care not to allow any water drops into the transducer elements and do not use any solvent cleaners. The microphone pop-shield of the headsets can be easily removed and washed in warm water. Please take care that the pop shield is completely dry when it is replaced. The ear-pads can wear out due to effects of skin moisture, cosmetics and mechanical strains while wearing the headphones. From time to time you will need to replace the ear-pads:
2. Loosen screws and
remove microphone holder.
V.11-Version of DT 287/297:
Adjustment of the built-in microphone pre-amplifier.
3. Turn the
microphone holder 90°. Tighten screws and put cap on again.
L
L
L
19
1. Remove the ear-pad from the housing part.
2. Put the new ear-pad on the housing so that the drop-in pins can lock in the corresponding holes.
3. Press the new ear-pad with the thumbs of both hands to the housing until you hear a clear “click” noise.
Safety
When plugging in any of the DT 200- series headsets to
the drive amplifier, we recommend that this is done before it is fitted over the ears for use. This will give the technician the chance to check that the volume levels are not too high. Please remember that the user could well be a highly-paid presenter and the consequences of damaging his/her ears may well prove to be music to the ears of the lawyer! The very low levels of distortion can make listening levels higher than is perceived and we have to warn you that listening to programme or talk­back at high levels for long periods can permanently damage your hearing.
english
Models
DT 250 Studio headphone, 80 Ω, black, with
WK 250.07 coiled cable, plug-in type (stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . Order # 442.844
DT 250 Studio headphone, 250 Ω, black, with
WK 250.07 coiled cable, plug-in type (stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . Order # 443.530
DT 252 Single-ear studio headphone, 80 Ω,
black, with WK 250.07 coiled cable, plug-in type (stereo mini jack plug
with 1/4" adapter) . . . . . . . . . . . Order # 445.177
DT 280 Single-ear headset, 200/80 Ω . . Order # 441.309 DT 280 Single-ear headset, 200/250 Ω. Order # 447.269 DT 280 V.11 Headset, 200/80 Ω with
integrated pre-amp . . . . . . . . . . Order # 442.860
DT 290 Headset, 200/80 Ω . . . . . . . . . . Order # 441.317
DT 290 Headset, 200/250 Ω . . . . . . . . . Order # 447.277
DT 290 V.11 Headset, 200/80 Ω
with integrated pre-amp . . . . . Order # 441.384
DT 291 PV Headset, 80 Ω, condenser microphone
(omnidirectional), with integrated
preamp for phantom
powering . . . . . . . . . . . . . . . . . . Order # 447.129
DT 291 PV same as above, but 250 Ω . . . . Order # 447.137
DT 287 PV Single-ear headset, 80 Ω,
condenser microphone
(cardioid) . . . . . . . . . . . . . . . . . . Order # 479.349
20
DT 287 V.11 Single-ear headset, 80 Ω,
condenser microphone
(cardioid) . . . . . . . . . . . . . . . . . . Order # 479.357
DT 297 PV Headset, 80 Ω, condenser
microphone (cardioid),
for 12 - 48 V phantom power. . Order # 479.365
DT 297 PV same as above, but 250 Ω . . . . Order # 479.454
DT 297 V.11 Headset, 80 Ω, with integrated
microphone pre-amp. . . . . . . . . Order # 479.462
Spares
BN 59-59/A Headband cushion. . . . . . . . . . . Order # 503.886
EDT 250 V Ear cushions pair
(cloth), for DT 25*/28*/29* . . . . Order # 942.704
EDT 250 S Ear cushions pair
(soft PVC), for DT 25*/28*/29* . Order # 943.549
WS 97 AZ Wind screen, charcoal-grey. . . . Order # 465.313
Optional Accessories
WK 250.07 Coiled cable for DT 25*
stereo mini jack plug
with 1/4" adapter . . . . . . . . . . . Order # 442.070
K 190.00 Straight cable for DT 28*/DT29*,
1.5 m, free ends. . . . . . . . . . . . . Order # 431.575
K 190.00 Straight cable for DT 28*/DT29*,
3 m, free ends . . . . . . . . . . . . . . Order # 441.937
K 190.28 Straight cable for DT 28*/DT29*,
1.5 m, with 4-pin XLR socket . . Order # 445.304
K 190.39 Straight cable for V.11 version of
the DT 29* series, with 5-pin
XLR plug to connect to professional
cameras (Sony, Philips, Ikegami),
1.5 m. . . . . . . . . . . . . . . . . . . . . . Order # 475.181
K 190.40 Straight cable for DT 28*/DT29*,
1.5 m, with 3-pin XLR plug and
1/4" stereo jack plug . . . . . . . . . Order # 445.894
K 190.40 Straight cable for DT 28*/DT29*,
3 m, with 3-pin XLR plug and
1/4" stereo jack plug . . . . . . . . . Order # 446.750
K 190.41 Straight cable for DT 28*/DT29*,
1.5 m, with 5-pin XLR plug . . . . Order # 445.312
K 190.48 Straight cable for DT 280/DT 290
with 2 x 3.5 mm stereo jack plugs
to connect to PC sound cards
(Warning: No phantom
powering). . . . . . . . . . . . . . . . . . Order # 479.470
WK 190.00 Coiled connecting cable
for DT 28*/DT29*,
3 m, free ends . . . . . . . . . . . . . . Order # 448.176
english
21
Technical Specifications
DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Headphone
Frequency response . . . . . 10 - 30,000 Hz
(for headsets optimised for highest
intelligibility of speech)
Nominal impedance . . . . . 80 Ω / 250 Ω
Nominal sound pressure
level at1 kHz . . . . . . . . . . . 100 dB SPL at 1 mW 0.28 V at
80 Ω
100 dB SPL at 1 mW 0.5 V at
250 Ω
Input power rating. . . . . . 100 mW 120 dB 2.8 V at 80 Ω
100 mW 120 dB 5 V at 250 Ω Ambient noise
attenuation . . . . . . . . . . . . approx. 16 dBA
Headband pressure. . . . . . 4.5 N
Weight (without cable) DT 250 / DT 290 / DT 294 /
DT 297 . . . . . . . . . . . . . . . . 240 g
DT 252 / DT 280 / DT 287 . 170 g
Wiring Diagram DT 250
=
^
=
^
=
^
=
^
=
^
=
^
22
DT 280 / DT 290 Microphone
Transducer type. . . . . . . . . . . . dynamic
Frequency response . . . . . . . . 40 - 12,000 Hz
Polar pattern . . . . . . . . . . . . . . hypercardioid
Interference discharging . . . . 30 dB
Output voltage at a distance
of 5 cm . . . . . . . . . . . . . . . . . . approx. 3 mV
Nominal impedance . . . . . . . . approx. 200 Ω
Weight . . . . . . . . . . . . . . . . . . . approx. 45 g
Frequency Response Curve
Wiring Diagram
Polar Pattern
Frequency response curve ± 2.5 dB 0 dB = 3 mV Output voltage at a distance of 5 cm
23
DT 290 V.11 Microphone
Transducer type. . . . . . . . . . . . dynamic
Frequency response . . . . . . . . 40 - 12,000 Hz
Polar pattern . . . . . . . . . . . . . . hypercardioid
Output voltage at a distance of 5 cm, Is = 16 mA,
Us = 10 V, Rv = 330 Ω . . . . . . . approx. 1.5 V
Output voltage at a distance of 5 cm, Is = 16 mA, Us = 10 V, Rv = 330 Ω,
RLS = 200 Ω. . . . . . . . . . . . . . . . approx. 750 mV
Nominal impedance . . . . . . . . approx. 200 Ω
Current consumption min. . . . 8 mA
Current consumption max.. . . 56 mA
Weight . . . . . . . . . . . . . . . . . . . approx. 45 g
Frequency Response Curve
Wiring Diagram
Polar Pattern
Frequency response curve ± 2.5 dB 0 dB = 3 mV Output voltage at a distance of 5 cm
english
24
DT 291 PV Microphone
Transducer type. . . . . . . . . . . . condenser (back electret)
Frequency response . . . . . . . . 20 - 18,000 Hz
Polar pattern . . . . . . . . . . . . . . omnidirectional
Output voltage at a distance
of 5 cm . . . . . . . . . . . . . . . . . . approx. 13 mV
Nominal impedance . . . . . . . . approx. 200 Ω
Load impedance . . . . . . . . . . . 1000 Ω
Max. SPL. . . . . . . . . . . . . . . . . . 127 dB
Current consumption . . . . . . . approx. 3.5 mA
Phantom powering . . . . . . . . . 12 - 48 V
Weight . . . . . . . . . . . . . . . . . . . approx. 20 g
Frequency Response Curve
Wiring Diagram
Polar Pattern
Frequency response curve ± 2.5 dB 0 dB = 6 mV/Pa
english
25
DT 287 PV / DT 297 PV Microphone
Transducer type. . . . . . . . . . . . condenser (back electret)
Frequency response . . . . . . . . 40 - 20,000 Hz
Polar pattern . . . . . . . . . . . . . . cardioid
Output voltage at a distance
of 5 cm . . . . . . . . . . . . . . . . . . . 5.5 mV
Nominal impedance . . . . . . . . 300 Ω
Load impedance . . . . . . . . . . . 1000 Ω
Max. SPL. . . . . . . . . . . . . . . . . . 132 dB
S/N ratio . . . . . . . . . . . . . . . . . . 62 dB
Current consumption . . . . . . . approx. 3.5 mA
Phantom powering . . . . . . . . . 12 - 48 V
Weight . . . . . . . . . . . . . . . . . . . approx. 30 g
Frequency Response Curve
Wiring Diagram
Polar Pattern
Sollfrequenzkurve ± 2,5 dB 0 dB = 5 mV/Pa
26
DT 287 V. 11 / DT 297 V.11 Microphone
Transducer type. . . . . . . . . . . . condenser (back electret)
Frequency response . . . . . . . . 20 - 20,000 Hz
Polar pattern . . . . . . . . . . . . . . cardioid
Output voltage at a distance
of 5 cm . . . . . . . . . . . . . . . . . . . approx. 52 mV - 1.3 V adjustable
Nominal impedance . . . . . . . . 300 Ω
Current consumption . . . . . . . 6 - 56 mA
Wiring Diagram
28
NOTICE D’UTILISATION DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Nous vous félicitons pour l’achat de ce casque / micro-
casque professionnel. Pour exploiter au mieux ses possibilités, nous vous conseillons de lire attentivement cette note explicative.
Description
DT 250 / DT 252
Le casque de studio fermé DT 250 / DT 252 se caractérise
par l’isolation parfaite contre les bruits ambiants. Il est alors l’outil idéal pour le studio d’enregistrement ou toute applicati­on de radiodiffusion et télévision. Grâce aux oreillettes / ban­deau serre-tête souples et remplaçables, ce casque vous offre un grand confort d’écoute même pour de longues heures de travail. Le système puissant d’aimants néodymes assure la haute précision et l’image sonore équilibrée du DT 250 / DT 252. L’impédance standard et de 80 Ω. Un système particulièrement sophistiqué d’une impédance de 250 Ω est livrable qui vous offre une fidélité audio extrêmement précise. Les câbles connecteurs des écouteurs sont protégés par l'arceau serre­tête, le câble principal est enfichable à connexion unilatérale.
DT 280 / DT 290
Similaire au DT 250, mais avec le microphone dynami-
que DM 290 de directivité hypercardioïde. Le micro-casque DT 280 / DT 290 se prête à l’utilisation lors des reportages de radio/télévision. Le DT 280/DT 290 V.11 dispose d’un préampli­ficateur de microphone intégré pour l’alimentation par câble audio.
DT 291 / DT 297
Similaire au DT 250, mais avec un microphone électret
condensateur de directivité omnidirectionnelle (DT 291) ou car­dioïde (DT 297). Le micro-casque DT 291 PV / DT 297 PV est muni d’un préam­plificateur intégré pour l’alimentation fantôme. Le DT 297 V.11 dispose d’un préamplificateur de microphone intégré pour l’alimentation par câble audio.
Branchements
Le casque de studio DT 250 / DT 252 est livré avec un
câble répondant à une utilisation spécifique. Les micro-casque DT 280 / DT 290 / DT 291 / DT 287 / DT 297 sont livrés sans un câble. La liste des câbles disponibles figure ci-après dans la rubrique «Accessoires en option».
français
29
Les câbles avec extrémités libres peuvent être directement sou­dés sur les broches de la fiche que vous utilisez (voir les «dia­grammes de câblage»). Sur demande, le casque peut être livré avec les fiches de votre choix déjà montées. Ne branchez le casque de studio ou le micro-casque que sur des appareils professionnels disposant d’une impédance et d’une tolérance de charge correspondant au modèle dont vous dis­posez. Le micro-casque DT 280 / DT 290 / DT 290 V.11 est muni d’un microphone symétrique qui peut aussi être branché sur une entrée de microphone asymétrique. Les micro-casques DT 291 PV et DT 297 PV sont conçus pour des entrées de microphone symétriques avec alimentation fantô­me. La sensibilité du microphone est de 13 mV ou de 250 mV pour une prise de son à 5 cm. Veuillez utiliser le micro-casque DT 280/DT 290 V.11 ou DT 287/ DT 297 V. 11 avec préamplificateur intégré pour la connexion aux caméras video avec entrée de microphone conçue pour l’alimentation par câble audio. La sensibilité du microphone est réglable entre 52 mV et 1,3 V pour une prise de son à 5 cm (volume de parole normal). La tension d’alimentation du préamplificateur peut varier de 6 à 27 V. Il en résulte une con­sommation:
DT 290 V.11 DT 297 V.11
6V R
vor
330 Ω 8 mA 6 mA
12 V R
vor
330 Ω 23 mA 20 mA
20 V R
vor
330 Ω 43 mA 40 mA
27 V R
vor
330 Ω 61 mA 57 mA
Utilisation
Ajustez l’arceau serre-tête à la taille de votre crâne. Le
microphone des micro-casques est d’origine monté côté gau­che. Son câble connecteur est protégé par l’arceau serre-tête. En cas de nécessité vous pouvez modifier ce montage pour avoir le micro côté droite.
1. Soulevez le couvercle
avec un petit tournevis.
L
30
Lorsque vous utilisez votre casque en stéréo il faut également intervertir les fils gauche/droite dans la fiche du casque (brun/orange [gauche] contre rouge/bleu [droite], voir «dia­grammes de câblages»). Pour réduire au maximum le risque d’effets «POP» il faut placer le microphone à environ 2-3 cm de l’angle de la bouche.
Entretien
Pour des raisons hygiéniques il est important de nettoy-
er le casque régulièrement avec un chiffon humide. N’utilisez que des produits de nettoyage doux (p.ex. produit pour vais­selle) mais en aucun cas des produits détergeants. Veillez à ce que l’eau ne s’infiltre pas dans les systèmes d’écoute. Les mous­ses de protec tion «POP» des micros se lavent simplement à l’eau tiède. Évitez de les replacer sur le microphone avant qu’el­les ne soient totalement sèches. Les oreillettes et les mousses «POP» étant soumises à une usure naturelle provoquée par la transpiration, la séborrhée et la salive, il est indispensable de les changer régulièrement. Les oreillettes se changent comme suit:
2. Libérez les visses et
enlevez le support du flexible.
Seulement la version V.11 du DT 287/297:
Réglage du préamplificateur intégré.
3. Retournez le bras support
support de 90
0
, resserrez la vis et
encliquetez le couvercle.
L
L
L
français
31
1. Enlevez l’oreillette de l’écouteur en la libérant au niveau de l’anneau plastique.
2. Placez la nouvelle oreillette en veillant de placer les ergots face aux perforations.
3. Pressez sur l’oreillette jusqu’à ce que vous entendez l’encliquetage mécanique.
La construction modulaire de cette série de casques et micro­casques permet un service après-vente simple et rapide. Vous trouverez les références des pièces détachées sur la vue éclatée et la liste figurant sur son verso.
Sécurité
Lorsque vous branchez le casque sur un amplificateur,
veillez à ce que le volume d’écoute soit d’abord ramené au niveau minimum. N’ajustez le volume d’écoute qu’après avoir revêtu le casque. L’écoute au casque se fait généralement à un niveau plus élevé qu’avec des haut-parleurs. Sachez qu’une écoute prolongée à niveau élevé peut entraîner des lésions auditives irrémédiables. Protégez votre audition, les casques beyerdynamic restituent la plénitude du spectre sonore, même à volume réduit.
Modèles
DT 250 Casque de studio, 80 Ω, noir, avec câble
torsadé WK 250.07, enfichable (Jack stéréo 3,5 mm /
adaptateur 6,35 mm) . . . . . . . . Art. N° 442.844
DT 250 Casque de studio, 250 Ω, noir, avec câble
torsadé WK 250.07, enfichable (Jack stéréo 3,5 mm /
adaptateur 6,35 mm) . . . . . . . . Art. N° 443.530
DT 252 Casque de studio (version avec un seul
écouteur), 80 Ω, noir, avec câble torsadé WK 250.07, enfichable (Jack stéréo 3,5 mm /
adaptateur 6,35 mm) . . . . . . . . Art. N° 445.177
DT 280 Micro-casque avec un seul écouteur,
200/80 Ω . . . . . . . . . . . . . . . . . . Art. N° 441.309
DT 280 Micro-casque avec un seul écouteur,
200/250 Ω . . . . . . . . . . . . . . . . . Art. N° 447.269
DT 280 V.11 Micro-casque avec un seul écouteur,
200/80 Ω, avec préamplificateur
intégré . . . . . . . . . . . . . . . . . . . . Art. N° 442.860
DT 290 Micro-casque, 200/80 Ω . . . . . . Art. N° 441.317
DT 290 Micro-casque, 200/250 Ω . . . . . Art. N° 447.277
DT 290 V.11 Micro-casque, 200/80 Ω,
avec préamplificateur intégré . Art. N° 441.384
32
DT 291 PV Micro-casque, 80 Ω, microphone
condensateur (omnidirectionnel), avec préamplificateur intégré pour alimentation
fantôme . . . . . . . . . . . . . . . . . . . Art. N° 447.129
DT 291 PV idem, mais 250 Ω . . . . . . . . . . . Art. N° 447.137
DT 287 PV Micro-casque mono-oreille,
80 Ω, microphone à
condensateur (cardioïde) . . . . . Art. N° 479.349
DT 287 V.11 Micro-casque mono-oreille,
80 Ω, microphone à
condensateur (cardioïde) . . . . . Art. N° 479.357
DT 297 PV Micro-casque, 80 Ω,
microphone à
condensateur (cardioïde),
pour alimentation
fantôme 12 - 48 V . . . . . . . . . . . Art. N° 479.365
DT 297 PV idem, toutefois 250 Ω. . . . . . . . Art. N° 479.454
DT 297 V.11 Micro-casque, 80 Ω, avec
préamplificateur intégré. . . . . . Art. N° 479.462
Pièces de rechange
BN 59-59/A Bandeau serre-tête . . . . . . . . . . Art. N° 503.886
EDT 250 V Oreillettes par pair, velours . . . Art. N° 942.704 EDT 250 S Oreillettes par pair,
plastique doux . . . . . . . . . . . . . . Art. N° 943.549
WS 97 AZ Bonnette anti-vent, anthracite. Art. N° 465.313
Accessoires en option
WK 250.07 Câble torsadé pour DT 25* avec
Jack stéréo 3,5 mm et
adaptateur 6,35 mm . . . . . . . . . Art. N° 442.070
K 190.00 Câble de connexion pour DT 28*/DT29*,
1,5 m, extrémités libres. . . . . . . Art. N° 431.575
K 190.00 Câble de connexion pour DT 28*/DT29*,
3 m, extrémités libres . . . . . . . . Art. N° 441.937
K 190.28 Câble de connexion pour DT 28*/DT29*,
1,5 m, avec prise XLR à
4 broches . . . . . . . . . . . . . . . . . . Art. N° 445.304
K 190.39 Câble de connexion pour version V.11
de DT 29*, avec fiche XLR à 5 broches
pour des caméras (Sony, Philips, Ikegami),
1,5 m. . . . . . . . . . . . . . . . . . . . . . Art. N° 475.181
K 190.40 Câble de connexion pour DT 28*/DT29*,
1,5 m, avec fiche XLR à 3 broches et
Jack stéréo 6,35 mm . . . . . . . . . Art. N° 445.894
K 190.40 Câble de connexion pour DT 28*/DT29*,
3,0 m, avec fiche XLR à 3 broches et
Jack stéréo 6,35 mm . . . . . . . . . Art. N° 446.750
français
33
K 190.41 Câble de connexion pour
DT 28*/DT29*, 1,5 m,
avec fiche XLR à 5 broches . . . . Art. N° 445.312
K 190.48 Câble de connexion pour
DT 280/DT 290, avec 2 fiches jack stéréo 3,5 mm pour des cartes sonores (Attention: pas de l’alimentation
fantôme) . . . . . . . . . . . . . . . . . . Art. N° 479.470
WK 190.00 Câble torsadé pour DT 28*/DT29*,
3 m, extrémités libres . . . . . . . . Art. N° 448.176
Spécifications techniques
DT 250 / DT 252 / DT 280 / DT 290 / DT 291 / DT 287 / DT 297
Écouteurs
Bande passante . . . . . . . . . . . . 10 à 30.000 Hz
(Optimisé pour l’intelligibilité
parfaite chez les micro-casques)
Impédance nominale . . . . . . . 80 Ω / 250 Ω
Pression sonore nominale
à 1 kHz . . . . . . . . . . . . . . . . . . . 100 dB SPL à 1 mW 0,28 V à
80 Ω
100 dB SPL à 1 mW 0,5 V à
250 Ω
Charge nominale efficace. . . . 100 mW 120 dB 2,8 V à 80 Ω
100 mW 120 dB 5 V à 250 Ω Atténuation du bruit
ambiant . . . . . . . . . . . . . . . . . . env. 16 dBA
Pression du serre-tête . . . . . . . 4,5 N
Poids sans câble DT 250 / DT 290 / DT 294 /
DT 297 . . . . . . . . . . . . . . . . . . . 240 g
DT 252 / DT 280 / DT 287 . . . . 170 g
Diagramme de câblage DT 250
=
^
=
^
=
^
=
^
=
^
=
^
34
DT 280 / DT 290 Microphone
Type de transducteur . . . . . . . dynamique
Bande passante . . . . . . . . . . . . 40 - 12.000 Hz
Directivité . . . . . . . . . . . . . . . . hypercardioïde
Supression de bruit . . . . . . . . . 30 dB
Voltage de sortie à 5 cm. . . . . env. 3 mV
Impédance de sortie
nominale . . . . . . . . . . . . . . . . . env. 200 Ω
Poids. . . . . . . . . . . . . . . . . . . . . env. 45 g
Courbe de fréquence
Diagramme de câblage
Directivité
Courbe de fréquence ± 2,5 dB 0 dB = 3 mV Voltage de sortie à 5 cm
français
35
DT 290 V.11 Microphone
Type de transducteur . . . . . . . dynamique
Bande passante . . . . . . . . . . . . 40 - 12.000 Hz
Directivité . . . . . . . . . . . . . . . . hypercardioïde
Voltage de sortie à 5 cm Is = 16 mA, Us = 10 V,
Rv = 330 Ω . . . . . . . . . . . . . . . . env. 1,5 V
Voltage de sortie à 5 cm Is = 16 mA, Us = 10 V,
Rv = 330 Ω, RLS = 200 Ω. . . . . . env. 750 mV
Impédance de sortie
nominale . . . . . . . . . . . . . . . . . env. 200 Ω
Consommation min. . . . . . . . . 8 mA
Consommation max. . . . . . . . . 56 mA
Poids. . . . . . . . . . . . . . . . . . . . . env. 45 g
Courbe de fréquence
Diagramme de câblage
Directivité
Courbe de fréquence ± 2,5 dB 0 dB = 3 mV Voltage de sortie à 5 cm
36
DT 291 PV Microphone
Type de transducteur . . . . . . . condensateur / électret
Bande passante . . . . . . . . . . . . 20 à 18.000 Hz
Directivité . . . . . . . . . . . . . . . . omnidirectionnel
Voltage de sortie à 5 cm. . . . . env. 13 mV
Impédance de sortie
nominale . . . . . . . . . . . . . . . . . 200 Ω
Impédance de charge
pondérée . . . . . . . . . . . . . . . . . 1000 Ω
Supression de bruit . . . . . . . . . 127 dB
Consommation . . . . . . . . . . . . env. 3,5 mA
Alimentation fantôme . . . . . . 12 - 48 V
Poids. . . . . . . . . . . . . . . . . . . . . 20 g
Courbe de fréquence
Diagramme de câblage
Directivité
Courbe de fréquence ± 2,5 dB 0 dB = 6 mV/Pa
français
37
DT 287 PV / DT 297 PV Microphone
Type de transducteur . . . . . . . condensateur / électret
Bande passante . . . . . . . . . . . . 40 à 20.000 Hz
Directivité . . . . . . . . . . . . . . . . cardioïde
Voltage de sortie à 5 cm. . . . . 5,5 mV
Impédance de sortie
nominale . . . . . . . . . . . . . . . . . 300 Ω
Impédance de charge
pondérée . . . . . . . . . . . . . . . . . 1000 Ω
Supression de bruit . . . . . . . . . 132 dB
Rapport signal/bruit . . . . . . . . 62 dB
Consommation . . . . . . . . . . . . env. 3,5 mA
Alimentation fantôme . . . . . . 12 - 48 V
Poids. . . . . . . . . . . . . . . . . . . . . env. 30 g
Courbe de fréquence
Diagramme de câblage
Directivité
Courbe de fréquence ± 2,5 dB 0 dB = 5 mV/Pa
38
DT 287 V. 11 / DT 297 V.11 Microphone
Type de transducteur . . . . . . . condensateur / électret
Bande passante . . . . . . . . . . . . 20 à 20.000 Hz
Directivité . . . . . . . . . . . . . . . . cardioïde
Voltage de sortie à 5 cm. . . . . env. 52 mV - 1,3 V réglable
Impédance de sortie
nominale . . . . . . . . . . . . . . . . . 300 Ω
Consommation . . . . . . . . . . . . 6 - 56 mA
Diagramme de câblage
DEF 2/BA DT250_DT297 (11.06)/580.031/Hoh. · Änderungen und Irrtümer vorbehalten · Subject to change without notice · Sous réserve de modifications · Printed in Germany
beyerdynamic GmbH & Co. KG Theresienstr. 8 D-74072 Heilbronn Tel. +49 (0) 71 31 / 617-0 Fax +49 (0) 71 31 / 617-224 info@beyerdynamic.de www.beyerdynamic.de
beyerdynamic Inc. USA 56 Central Ave. Farmingdale, NY 11735 Tel. +1 (631) 293-3200 Fax +1 (631) 293-3288 salesUSA@beyerdynamic.com www.beyerdynamic.com
beyerdynamic U.K. Ltd. 17 Albert Drive Burgess Hill RH15 9TN Tel. +44 (0)1444 / 258258 Fax +44 (0)1444 / 258444 sales@beyerdynamic.co.uk www.beyerdynamic.co.uk
Loading...