MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 1
AVENTHO
WIRELESS
––
HEADPHONES
KOPFHÖRER
Manual
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 4
4
Thank you for choosing Aventho wireless Bluetooth headphones. To ensure an optimum
listening experience, we would like to give you a brief instruction on how to use Aventho
wireless.
Aventho wireless – Headphones
Safety instructions
Caution:
When you connect the headphones, please make sure that the volume level is
set to minimum. Adjust the volume level only after putting on the headphones.
We would like to point out that excessively high volumes and long listening times
may cause hearing damage. Hearing defects always constitute an irreversible
impairment of hearing ability.
Always ensure an adequate volume level. It is advisable to keep listening times as short
as possible at high volume levels. According to the Occupational Health and Safety
Regulations of German trade associations BGV B3, noise pollution e.g. in the workplace
must not exceed 85 dB (room volume level) during a maximum permissible listening
time of 8 hours. If the volume level is increased by 3 dB respectively, the permissible
listening time is cut in half, i.e. at 88 dB, the listening time is 4 hours, at 91 dB
2 hours, etc.
Danger to life!
Headphones drastically reduce perception of external sounds. Using headphones in road
traffic can be potentially dangerous. The user’s hearing must not be impaired to the
extent that it causes road safety risks. Please also make sure that you do not use the
in-ear headphones within an area of potentially dangerous machines and tools.
Risk of injury!
Avoid sudden movements when using wired headphones. You might seriously hurt
yourself especially if you wear piercings, earrings, glasses, etc., where the wire can get
caught.
Box contents
• Aventho wireless headphones
• Jack connection audio cable 3.5 mm
• Charging cable USB-A to USB-C
• Soft bag
• Warranty booklet
• This Quick Start Guide
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 5
Aventho wireless – Headphones
Storage and removal from the packaging
Removal from the packaging
Hold the Aventho wireless on the headband and pull it out of the soft bag. Rotate
the two ear cups inward so that the ear
pads are facing each other. Refer to the
illustration.
Storage
Rotate the two ear cups as indicated by
the arrows. Hold the Aventho wireless and
put it into the soft bag with the ear cups
first. Refer to the illustration.
How to adjust the headband
Before wearing the Aventho wireless for the first time you should adjust it properly to
achieve the best sound and ambient noise attenuation.
Please refer to the following tips:
• Select the appropriate lock-in position on both sides of the headband.
• Adjust the angle of the ear pads.
• Place the Aventho wireless centrally on your ears as shown in the middle picture.
5
english
Headphone is too high Perfect fit of the headphone Headphone is too low
MAN_Aventho-wireless_EN_.qxp_Layout 1 26.09.17 10:43 Seite 6
6
Aventho wireless – Headphones
beyerdynamic MIY app
By using the beyerdynamic MIY app you can personalise your Aventho wireless. The app
is available for Apple iOS and Android and can be downloaded from both the Apple App
Store and the Google Play Store.
Note firmware version 1.0
The following descriptions refer to the firmware version 1.0 installed on the present
Bluetooth headphones.
Controls and indicators
LR
Microphone
USB connection for charging cable
(USB-C)
LED
Button
Jack connector 3.5 mm for audio
cable
Touch pad