BevLes, Inc. PHC23-AR10, PHC23-AR12 General Manual

Options & Accessories

• 4” or 6” stainless steel legs with
adjustable feet

• 4" or 5" casters (for under-counter
placement)

• Chrome electro-plated wire racks (18”x26”)

• 240V electrical system

Warranty & Cerifications

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

PROOFER / HOT CABINET

Wall-Mount / Countertop Insulated

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Design Features

• "Cast-in" humidity system prevents element
burnout from water spills and potential
injury from accidental contact with exposed
heating element

• Dual fans uniformly distribute temperature
and humidity throughout cabinet

• Separate controls for heat and humidity

• Proof or hold with adjustable temperature
from 80°F(27°C) to 180°F (82°C)

• Self-draining feature collects excess
moisture into a standard 18” x 26” bun pan
(not included) below the base of the
cabinet

Quality Construction

Solid Construction for Reliability

• Aluminum construction

• 1 1/2" thick fiberglass insulation throughout
top, sides, back and base

• Extruded pan supports accept 18" x 26"
pans (side loading)

• Sliding Lexan® doors – easily removable
for cleaning

• Completely removable interior components
for quick and easy cleaning

• Full-length wall mounting bracket for
secure attachment

Models:  PHC23-AR10  PHC23-AR12

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

PROOFER / HOT CABINET

Wall-Mount / Countertop Insulated

Construction:

• Body

: .063 aluminum

• Doors

: Clear Lexan with stainless steel edges

(sliding type)

• Insulation

: Fully insulated back, sides, top and base
with 1.5" fiberglass insulation (5.7 R-Factor and
minimum rating of .26K per inch)

• Door Gasket: Closed cell foam

• Base

: .125 aluminum

Pan Support Assembly:

• Side and Center (Air Duct) Panels: .063 aluminum

• Pan Supports: Extruded aluminum angles on 3" or
2 1/2" centers (bottom supported)

• Extruded pan support/air duct assembly: Aluminum
components easily removable for cleaning

Heating Module and Controls:

• Bottom heating unit with two (2) air circulation fans

• Two (2) air heating elements, 500W each, 120V

• Humidity heating element rated at 400W, 120V

• 5 quart (4.7 liter) cast water reservoir

• Easy to operate controls feature precision thermostat,
adjustable humidity and dial thermometer

Electrical:

• Switch: 15 Amp, lighted

• Cord and Plug: 120V comes with 8' cord with 15A
molded plug (NEMA 5-15P); 24V comes with cord only

Shipping:

• Freight Class: 85

• FOB: Cheyenne, WY 82007

Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances

Standard 120 1400 13 15A Dedicated Circuit 1 50/60 Zero Clearance Cabinet
Optional 240 1400 5.8 15A Dedicated Circuit 1 50/60 Zero Clearance Cabinet

Model

Capacity Dimensions

Ship Wt. Act. Wt.

18x26 12x20 SPC’G H W D

PHC23-AR10 10 --- 3” 24” (61 cm) 60” (152.4 cm) 21” (53.3 cm) 240 lbs (609.6 kg) 225 lbs (102.1 kg)
PHC23-AR12 12 --- 2½” 24” (61 cm) 60” (152.4 cm) 21” (53.3 cm) 245 lbs (622.3 kg) 230 lbs (104.3 kg)

4/20/05

#B205

Models:  PHC23-AR10  PHC23-AR12

D

H

W