BevLes, Inc. HTSS74P34, HTSS74W12, HTSS44W6 General Manual

Options & Accessories

• Left-hand door hinging

• Full perimeter bumper

• Corner bumpers

• Pass-through design

• Doors with tempered glass windows

• Stainless steel cord wrap

• 208V or 240V models

• Key lock latch

• Solid state controls w/ digital temperature
display

• Transport handles

• 5” polyurethane casters

Warranty & Cerifications

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

Temper Select

Heated Holding Systems

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Design Features

• Temperature range of 70° - 215°F
for heating and holding a variety of foods.

• Top mounted convection heat and humidity
system maintains even cabinet
temperatures and ensures quick pre­heating and rapid recovery.

• Fully insulated cabinet prevents heat loss
and keeps foods hot and ready to serve.
Side air tunnel system circulates air evenly
throughout the cabinet with minimal
temperature loss when the doors are
opened.

• Solid state controls provide the highest
degree of accuracy and reliability.
Prepared foods are held at consistent
serving temperatures.

• Easy-to-clean radiused interior corners
prevent food/grease buildup.

• Removable top water pan provides
additional humidity for hard to hold items.

Quality Construction

• Stainless steel construction provides years
of dependable use

• .190 aluminum welded base

• Heavy duty plate type casters with 5” hard
rubber wheels; front two with brakes

• Heavy duty field reversible Dutch doors
with self-closing lift off hinges and magnetic
latches with “cool-to-touch” handle and turn
knob lock

• Magnetic door gaskets

• Recessed stainless steel side-mounted
(front and rear) pull grips provide easy
mobility and prevent damage to walls

Models:  HTSS74P34  HTSS44P16  HTSS74W12  HTSS44W6

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

Temper Select

Heated Holding Systems

Construction

• Exterior Body: 20 ga., 304-#3 stainless steel

• Interior Body: 20 ga., 304-2B stainless steel

• Exterior Door

: Formed 20 ga. 304-#3 stainless steel

• Interior Door

: 22 ga., 430 bright annealed stainless steel

• Door Configuration: Dutch doors (right hand hinged
standard) (field reversible)

• Reinforcement: Internal framework of 18 ga. 201
stainless steel

• Latches

: Heavy-duty magnetic latch with “cool-to-

touch” handle and turn knob lock

• Hinges

: Heavy-duty, lift off, self-closing

• Base

: One-piece construction, .190 aluminum,

welded

• Casters

: 5” hard rubber wheels, swivel type, front

two equipped with brakes.

• Side-pull grip

s: Recessed stainless steel pull grips

mounted with hardware

• Door gaskets: Magnetic, NSF approved Santoprene

• Insulation: Fully insulated back, sides, base, top
and doors with 1.5” fiberglass insulation

Pan Support Assembly

• Side (Air Duct) Panels: 20 ga. 304-2B stainless steel

• Pan Supports Standard: Channel style

• Pan Supports Universal: Chrome plated rod style

Power Requirements

• 1274W at 120V, 50/60Hz, single phase, 15 amp service

• 1824W at 120V, 50-60Hz, single phase, 20 amp service

• Power Cord: Permanent 8 ft. 12/3 ga. with molded
(NEMA 5-15P) plug, or (NEMA 5-20P). 208V or 240V
models provided with cord only

Heating Module & Controls

• Easy to operate, user-friendly solid state controls

• Lighted Power Switch: Indicates when unit is
operating

• T

emperature Control: Temperature range 70° - 215°F

Shipping

• Freight Class: 85

• FOB: Cheyenne, WY 82007

W

Model

Capacity Dimensions

Ship Wt. Act. Wt.

18x26 12x20 SPC’G* H W D

Standard Width

HTSS74P34 34 -- 1.5” 73.63” (187 cm) 25” (63.5 cm) 34” (86.4 cm) 302 lbs (137 kg) 277 lbs (125.7 kg)

HTSS44P16 16 -- 1.5” 43.6” (110.8 cm) 25” (63.5 cm) 34” (86.4 cm) 201 lbs (91.2 kg) 176 lbs (79.8 kg)

Universal Width

HTSS74W12 12 24 4.5” 73.63” (187 cm) 28.1” (71.4 cm) 34” (86.4 cm) 345 lbs (156.5 kg) 320 lbs (145 kg)

HTSS44W6 6 12 4.5” 43.6” (110.8 cm) 28.1” (71.4 cm) 34” (86.4 cm) 229 lbs (103.9 kg) 204 lbs (92.5 kg)

Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances

Standard 120 1274 10.6 15A Dedicated Circuit 1 50/60 Sides, Back, & Top = 0”

Standard HW 120 1824 15.2 20A Dedicated Circuit 1 50/60 Sides, Back, & Top = 0”

Optional 208 1581 7.8 15A Dedicated Circuit 1 50/60 Sides, Back, & Top = 0”

Optional 240 2092 8.7 15A Dedicated Circuit 1 50/60 Sides, Back, & Top = 0”

5/8/06

#B109

Models:  HTSS74P34  HTSS44P16  HTSS74W12  HTSS44W6

*Pan supports are adjustable on 1.5” spacing

Item No. ________

Approval: _______

Date: __________

H

Standard 47.875” (121.6 cm)
Universal 54.125” (137.5 cm)

D