BevLes, Inc. CS82-TC30 General Manual

Options & Accessories

• Corner bumpers

• Perimeter bumper

• Door hinging

• Chrome electro-plated wire roasting racks

• 4” or 5” casters

Warranty & Cerifications

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

ROAST & HOLD OVENS

Tender Touch Classic Stacked 120V

Design Features

• User-friendly solid state controls with digital
display

• Standard Pass-Thru design speeds
cleaning by eliminating hard-to-reach
corners – makes loading and unloading
quick and easy

• Power Loss Alarm informs operator of power
failure, that exceeds 3 minutes, during
unattended roasting or holding cycles

• Roast and hold temperature range of
145°F - 245°F (63°C - 118°C)

• Timer range allows a maximum roasting
time of 16 hours

• Heavy-duty Sealed Power Switch –
protects from water, grease and dirt

• Top mounted convection heat and humidity
system with high wattage heating element
maintains even temperatures throughout
the oven ensuring quick preheating and
rapid recovery

• Stacked ovens provide the opportunity to
roast and/or hold different products at the
same time

• Stacked design features the versitility of
having two separate ovens occupying the
floor space of one

Quality Construction

• All stainless steel construction provides
years of dependable use in all types of
environment

• Top mounted heat and humidity system is
easily removable for cleaning and service

• High Quality Lexan® Front Panel Decal
allows for easy cleaning

• Door features include magnetic gasket to
prevent heat loss, heavy-duty hinges and
positive-closing latch

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Models:  CS82-TC28+  CS82-TC30  CS82-TCMP10+  CS82-TCMP12

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

*

Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

ROAST & HOLD OVENS

Tender Touch Classic Stacked 120V

Model

Capacity Dimensions

Ship Wt. Act. Wt.

18x26 12x20 SPC’G H W D

Standard Width

CS82-TC28+ 28 --- 1½” 82” (208.3 cm) 25” (63.5 cm) 31” (78.7 cm) 455 lbs (206.4 kg) 440 lbs (199.6 kg)
CS82-TC30 30 --- 1½” 82” (208.3 cm) 25” (63.5 cm) 31” (78.7 cm) 455 lbs (206.4 kg) 440 lbs (199.6 kg)

Universal Width

CS82-TCMP10+ 10 20 3¼” 82” (208.3 cm) 29” (73.7 cm) 31” (78.7 cm) 480 lbs (158.8 kg) 465 lbs (210.9 kg)
CS82-TCMP12 12 24 3¼” 82” (208.3 cm) 29” (73.7 cm) 31” (78.7 cm) 480 lbs (158.8 kg) 465 lbs (210.9 kg)

Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances

Standard 120 2000 16 20A Dedicated Circuit 1 50/60 Sides, Back, & Top = 0”

Heating Modules & Controls:

• Heating Module

: Removable for maintenance and

cleaning

• Humidity System

: Models CS82-TC28+ &
CS82-TCMP10+ are equipped with a 9 quart (8.5 liter)
stainless steel water reservoir with adjustable baffles

• Fan Blower

: 1-piece modular drop-in design blower

assembly

Pan Support Assembly:

• CS82-TC28+ & CS82-TC30 models have
heavy-duty extruded aluminum panels with pan
supports on 1½” centers (pans are lip supported)

• CS82-TCMP10+ & CS82-TCMP12 models have
22 ga. stainless steel (air duct) panels with heavy-duty
chrome electro-plated wire pan supports adjustable on
1 5/8” centers (pans are bottom supported)

Shipping:

• Freight Class: 85

• FOB: Cheyenne, WY 82007

Specifications:

• Exterior Body: 20 ga. 304 #3 stainless steel

• Interior Body: 20 ga. 304-2B stainless steel

• Exterior Door: 20 ga. 304 #3 stainless steel

• Interior Door: 22 ga. auto-brite stainless steel

• Base

: 14 ga. 304-2B stainless steel

• Door Gasket(s)

: Magnetic, NSF approved Santoprene

• Insulation: Fully insulated sides, base, top and door(s)
with 1.5” fiberglass insulation (5.7 R-Factor and
minimum rating of .26K per inch)

Electrical:

• Switch: Custom sealed heavy-duty 20 Amp

• Cord & Plug

: 120V models, 8’ cord with 20 Amp

molded plug (NEMA 5-20P)

Casters:

• Heavy-duty plate type casters, all swivel, with 5” hard
neoprene wheels; front two casters with brakes

6/10/05

#B302

Models:  CS82-TC28+  CS82-TC30  CS82-TCMP10+  CS82-TCMP12

(+) designates models equipped with humidity system

D

H

W

48.5”

(123.2 cm)