BevLes, Inc. CS34-TC9-HV+, CS43-TC14-HV+, CS43-TC15-HV, CS34-TCMP4-HV, CS43-TCMP5-HV+ General Manual

Te nde r Touc h Cla ssic H a lf-Size 2 0 8 /2 4 0 V

Models:  CS34-TC9-HV+  CS34-TC10-HV  CS43-TC14-HV+  CS43-TC15-HV  CS34-TCMP4-HV  CS43-TCMP5-HV+  CS43-TCMP6-HV

Design Fe ature s

• User-friendly solid state controls with digital
display

• Standard Pass-Thru design speeds
cleaning by eliminating hard-to-reach
corners – makes loading and unloading
quick and easy

• Power loss alarm informs operator of power
failure, that exceeds 3 minutes, during
unattended roasting or holding cycles

• Roast and hold temperature range of
145°F - 245°F (63°C - 118°C)

• Timer range allows a maximum roasting
time of 16 hours

• Heavy-duty Sealed Power Switch –
protects from water, grease and dirt

• Top mounted convection heat and humidity
system with high wattage heating element
maintains even temperatures throughout
the oven ensuring quick preheating and
rapid recovery

ROAST & H OLD OVEN S

Options & Accessories

• Corner bumpers

• Perimeter bumper

• Door hinging

• Chrome electro-plated wire roasting racks

• 4” or 5” casters

Quality Construc t ion

• All stainless steel construction provides
years of dependable use in all types of
environment

• Top mounted heat and humidity system is
easily removable for cleaning and service

• High Quality Lexan® Front Panel Decal
allows for easy cleaning

• Door features include magnetic gasket to
prevent heat loss, heavy-duty hinges and
positive-closing latch

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

Wa r ra nt y & Cerificat ions

Parts and Service Warranty

• Protected by BevLes 2 year parts and 1
year service warranty

Certified by the following:

ROAST & H OLD OVEN S

Te nde r Touc h Cla ssic H a lf-Size 2 0 8 /2 4 0 V

Models:  CS34-TC9-HV+  CS34-TC10-HV  CS43-TC14-HV+  CS43-TC15-HV  CS34-TCMP4-HV  CS43-TCMP5-HV+  CS43-TCMP6-HV

Model

Standard Width

CS34-TC9-HV+ 9 --- 1½” 34” (86.4 cm) 25” (63.5 cm) 31” (78.7 cm) 195 lbs (88.5 kg) 180 lbs (81.6 kg)

CS34-TC10-HV 10 --- 1½” 34” (86.4 cm) 25” (63.5 cm) 31” (78.7 cm) 195 lbs (88.5 kg) 180 lbs (81.6 kg)

CS43-TC14-HV+ 14 --- 1½” 43” (109.2 cm) 25” (63.5 cm) 31” (78.7 cm) 235 lbs (106.6 kg) 220 lbs (99.8 kg)

CS43-TC15-HV 15 --- 1½” 43” (109.2 cm) 25” (63.5 cm) 31” (78.7 cm) 235 lbs (106.6 kg) 220 lbs (99.8 kg)

Universal Width

CS34-TCMP4-HV 4 8 3¼” 34” (86.4 cm) 29” (73.7 cm) 31” (78.7 cm) 210 lbs (95.3 kg) 195 lbs (88.5 kg)

CS43-TCMP5-HV+ 5 10 3¼” 43” (109.2 cm) 29” (73.7 cm) 31” (78.7 cm) 255 lbs (115.7 kg) 240 lbs (108.9 kg)

CS43-TCMP6-HV 6 12 3¼” 43” (109.2 cm) 29” (73.7 cm) 31” (78.7 cm) 255 lbs (115.7 kg) 240 lbs (108.9 kg)

Electrical Voltage Watts Amps Electric Service Phase Hertz Clearances

Optional 208/120 2400 13 20A Dedicated Circuit 1 w/nuetral 50/60 Sides, Back, & Top = 0”

Optional 240/120 2740 13 20A Dedicated Circuit 1 w/nuetral 50/60 Sides, Back, & Top = 0”

(+) designates models equipped with humidity system

Specifications:

• Exterior Body: 20 ga. 304 #3 stainless steel

• Interior Body: 20 ga. 304-2B stainless steel

• Exterior Door: 20 ga. 304 #3 stainless steel

• Interior Door: 22 ga. auto-brite stainless steel

• Base: 14 ga. 304-2B stainless steel

• Door Gasket(s): Magnetic, NSF approved Santoprene

• Insulation: Fully insulated sides, base, top and door(s)
with 1.5” fiberglass insulation (5.7 R-Factor and
minimum rating of .26K per inch)

Electrical:

• Switch: Custom sealed heavy-duty 20 Amp

• Cord & Plug: 208V or 240V models provided with
8’ cord only

Casters:

• Heavy-duty plate type casters, all swivel, with 5” hard
neoprene wheels; front two casters with brakes (CS34
series feature 3” casters)

Capacity Dimensions

18x26 12x20 SPC’G H W D

Heating Modules & Controls:

• Heating Module: Removable for maintenance and
cleaning

• Humidity System
& CS43-TCMP5-HV+ are equipped with a 9 quart (8.5 liter)
stainless steel water reservoir with adjustable baffles

• Fan Blower
assembly

: 1-piece modular drop-in design blower

Pan Support Assembly:

• CS34-TC9-HV+ & TC10-HV, CS43-TC14-HV+ &
TC15-HV models have heavy-duty extruded aluminum
panels with pan supports on 1½” centers (pans are
lip supported)

• CS34-TCMP4-HV, CS43-TCMP5-HV+ & TCMP6-HV
models have 22 ga. stainless steel (air duct) panels
with heavy-duty chrome electro-plated wire pan supports
adjustable on 1 5/8” centers (pans are bottom supported)

Shipping:

• Freight Class: 85

• FOB: Cheyenne, WY 82007

Ship Wt. Act. Wt.

: Models CS34-TC9-HV+, CS43-TC14-HV+,

* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.

Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
[phone] • Fax: [phone] • www.bevles.com • [e-mail]

6/10/05

#B303