Installation Instruction
4X
1Nm
(8.85 In.lbf.)
1
2
3
4
5
4X
1Nm
(8.85 In.lbf.)
1
2
3
4
6
1
5
4X
E.G. : QX2-A1
4X
1Nm
(8.85 In.lbf.)
1
2
3
4
2 6
7
1
5
4X
=
E.G. : QX2-A1
4X
1Nm
(8.85 In.lbf.)
1
2
3
4
2 6
7
1
5
3
(8.85 In.lbf.)
4X
1Nm
(8.85 In.lbf.)
1
2
3
4
5
DOC.QC4.PVC.1 Rev. B
October 2015
Replacing pilot valve cartridge.
- Pilot valve cartridges can only be exchanged by identical cartridges for repair purposes.
- See Installation guide DOC.IG.QC41.1 for further installation instructions.
Control Modules
Replacement procedure:
- Before starting check that all the required parts are included.
Kit contents:
Pos. Qty. Part nr. Description
1 1x QX2-A1 QC41, 1x pilot 24vdc
2 4x O-ring
1 Loosen the set screw before opening the cover.
QX2-A2 QC41, 2x pilots 24vdc
QX2-A3 QC42, 1x pilot 115VAC
QX2-A4 QC42, 2x pilots 115VAC
QX2-A5 QC43, 1x pilot 230VAC
QX2-A6 QC43, 2x pilots 230VAC
4 Notice the presence of the O-rings before placing a pilot
5 Place the pilot cartridge and fasten the screws according
1
2 Loosen the screws with a Phillips head no.2 screw driver.
6 After pilot valve cartridge replacement, mount and lock
2
cartridge.
4
to the sequence, with a Phillips head no. 2 screwdriver.
5
the cover to the module.
4
3
6
4X
1
2
OK !
4X
1Nm
4X
3 Gently remove the pilot cartridge from the module com-
partment and replace with same part number.
3
=
Loading...