bettini T5365 Instruction Manual

INFORMATION - This equipment has been tested and found to comply with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

◆

Do NOT use power sources other than those specified.

◆

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Super DNR High Resolution Built-in Lens Color Camera

Features

Warnings and Precautions

Names and Functions of Parts

■

Front

■

Top

■

Rear

Installation

■

Connecting to a monitor

■

Connecting to power

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

■

Contents

Camera Operation

■ Settings

ㆍ LENS

ㆍ EXPOSURE

ㆍ WHITE BALANCE

ㆍ󰼿DAY/NIGHT

ㆍ DNR

ㆍ SPECIAL

ㆍ ADJUST

ㆍ RESET

ㆍ EXIT

󰼿󰼿󰼿- CAM TITLE 󰼿󰼿󰼿- D-EFFECT 󰼿󰼿󰼿- RS485 󰼿󰼿󰼿- MOTION 󰼿󰼿󰼿- PRIVACY 󰼿󰼿󰼿- SYNC 󰼿󰼿󰼿- LANGUAGE 󰼿󰼿󰼿- RETURN

Specifications

Troubleshooting

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

Auto Iris Vari-focal Built-in Lens

DC Auto Iris Vari-focal Lens is built in.

■

Features

Warning ■

Horizontal Resolution of 540 TV Lines

Clear image quality has been achieved by employing a SONY CCD with 410,000 (effective) pixels, which provides a horizontal resolution of 540 TV lines.

Electronic IRIS

The electronic IRIS function enables continuous automatic control of the shutter between 1/50(60)~1/100,000 seconds.

PRIVACY Function

The PRIVACY function conceals the areas not required to appear on the image.

Programmable GAMMA Processing

Controlled by OSD Menu

The camera functions are controlled by selecting text displayed on the monitor screen.

Additional Functions

MOTION DETECTION, MIRROR, SHARPNESS and COLOR ADJUST functions are also available.

VIDEO / DC Drive Lens

The video drive lens and the DC drive lens can be selected by the touch of a switch.

The camera requires periodic inspection.

Contact an authorised technician to carry out the inspection.

Stop using your camera when you find it malfunctioning.

If the camera emits smoke or is unusually hot for a long period, a fire may be caused.

Do not Install the camera on a surface that can not support it.

If the camera is installed on an inappropriate surface, it may fall and cause injury.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not dis-assemble the camera.

It may result in an electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in a fire or other hazards.

DNR (Digital Noise Reduction)

The amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N ratio) as well as horizontal resolution, have been improved resulting in a clear and sharp image image even in low light.

Excellent Sensitivity

Adopting a Diagonal 6mm (1/3"), highly sensitive CCD and digital signal processing technology, it can clearly distinguish the outline and color of a subject in an extremely low luminance environment . even, for example, under starlight. Since surveillance is possible in places where the light is poor, the camera is appropriate for day and night surveillance outdoors or on the outside of buildings.

Day & Night

The camera identifies whether it is day or night and automatically switches to the appropriate mode, depending on its environment. By day, the camera switches to color mode in order to maintain optimal color. At night, it switches to B/W mode so as to obtain better picture definition.

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

■

Precautions

Only use the camera under conditions where temperatures are between

-10¡C and +50¡C. Be especially careful to provide ventilation when operating under high temperatures.

It can cause the image quality to be poor.

Severe lighting change or flicker can cause the camera to work improperly.

This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.

Do not install the camera in extreme temperature conditions.

Do not install or use the camera in an environment where the humidity is high.

Do not install the camera under unstable lighting conditions.

Do not touch the front lens of the camera.

It can cause malfunctions to occur.

If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components.

If exposed to radioactivity the CCD will fail.

It can damage the CCD.

Do not expose the camera to rain or spill beverage on it.

Do not expose the camera to radioactivity.

Never keep the camera pointed directly at strong light.

Do not drop the camera and protect it to physical shocks.

Note

ㆍIf the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

ㆍ Please check that the power satisfies the normal specification before

connecting the camera.

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

Front

■

Components

Names and Functions of Parts ■

Top

①

Built-in Lens

Built-in DC Auto Iris Vari-focal lens.

②

Front Cover

Used to access focus or zoom handle. After adjusting, be sure to close it.

③

Focus Handle

Used to provide accurate focusing of object within lens field of view.

④

Zoom Handle

Used to adjust zoom magnification of lens.

⑤

Tripod Mount Bracket Screw Hole

Used to fix the tripod mounting bracket on the top of the camera

⑥

Mounting bracket screw hole

Please use the screw hole when fixing the camera onto the mounting bracket. Please use the clamp screw as specified picture.

※

The mounting bracket can be separated and attached to the top of the camera. In this instance please do not tighten the screw to a depth of more than 5mm, otherwise serious damage can occur to the inside of the camera.

Super DNR High ResolutionBuilt-in Lens Color Camera Super DNR High ResolutionBuilt-in Lens Color Camera

DC 12V IN

VIDEO OUT

POWER

SET

F.G

AC 24V IN DC 12V IN

VIDEO OUT

POWER

SET

F.G

AC 24V IN DC 12V IN

VIDEO OUT

POWER

SET

F.G

Rear

■

Names and Functions of Parts

Installation

■

⑦ Power LED

Lights up

when the correct power is supplied

⑧ Video Out Jack

Used to connect an external video Monitor

⑨ Menu SET Buttons ㆍSET Button

Used to access menu mode. Also used to confirm the setting.

ㆍUP & DOWN Buttons

Used to choose the desired menu item. It also moves the cursor up or down in the menu screen.

ㆍLEFT & RIGHT Buttons

Used to change the parameter of the selected menu item. It also moves the cursor to the left or right in the menu screen.

⑩ Power Terminal

Used to connect AC24V or DC12V power source

ㆍThe connection method varies depending on the type of monitor and

accessories. Please refer to the user's manual for each instrument.

ㆍTurn off the power when connecting.

■

Connecting to a monitor

Check the standard power requirement before connecting to power.

■

Connecting to power

AC 24V IN DC 12V IN

POWER

DC 12V IN

POWER

Dual Power Type (AC 24V/DC 12V, AC 24V Class2)

DC Power Type (DC 12V, 500mA)

Connect the video output terminal located on the back of the camera tothe monitor.

AC 24V IN DC 12V IN

VIDEO OUT

POWER

SET

F.G

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

■

Camera Operation

■

Settings can be made using the 5 buttons located on the rear of the camera

■

Settings

1. Press the SET button

ㆍThe Setup menu is displayed on the monitor screen.

2. Select a menu item using the Up and Down buttons.

ㆍPlace the cursor over a desired item.

SETUP

LENS DC

EXPOSURE WHITE BAL ㅡㅡㅡ

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

SETUP menu

LENS (selection)

EXPOSURE

WHITE BAL

DAY NIGHT

3DNR

SPECIAL

ADJUST

EXIT

ㆍMANUAL ㆍDC/VIDEO

ㆍSHUTTER ㆍBRIGHTNESS ㆍAGC ㆍSENS-UP ㆍBLC ㆍD-WDR ㆍRETURN

ㆍATW ㆍAWB ㆍAWC ㆍMANUAL

ㆍCOLOR ㆍAUTO ㆍEXT ㆍB/W

ㆍON ㆍOFF

ㆍCAMTITLE ㆍD-EFFECT ㆍRS-485 ㆍMOTION ㆍPRIVACYㆍLANGUAGE ㆍRETURN ㆍSYNC

ㆍFACTORY RESET ㆍRETURN

RESET

ㆍSHARPNESS ㆍBLUE ㆍRED

AC 24V IN DC 12V IN

VIDEO OUT

POWER

UP button

SETUP button

RIGHT button

DOWN button

LEFT button

SET

Note

SETUP

LENS DC

EXPOSURE

WHITE BAL

ㅡㅡㅡ

SETUP

LENS DC

EXPOSURE WHITE BAL ㅡㅡㅡ

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

● DC/VIDEO : Auto Iris Lens selection.

•

When using an auto iris lens, the setting of the auto iris lens selection switch, located on the back of the camera, must be on DC or VIDEO depending on the type of the lens which being used. (Refer to the picture on page 13)

•

The brightness of the screen can be adjusted in DC mode. The brightness can be adjusted within the range of 0 ~100. The optimum level of brightness can be achieved using this adjustment.

• If you press the Set button in "MANUAL LENS", You can Adjust brightness in EXPOSURE.

•

If you press the Set button in "DC/VIDEO", You can't adjust brightness

in EXPOSURE, Return to "LENS" and adjust brightness.

●

MANUAL : Manual Lens selection.

3. Set up a selected item by using the Left and Right buttons.

4. To finish and save the settings, select 'EXIT' and press the SET button.

This function is used to adjust the brightness of the screen.

When the SETUP menu screen is displayed on the screen, position

the cursor to point to LENS using the Up and Down buttons.

2. Select the type of lens using the Left and Right buttons.

Select the desired menu

item by using the UP and

DOWN buttons.

Modes can be changed using the LEFT and RIGHT buttons.

LENS

Note

• An item with the icon also has sub-menus. To select a sub-menu, press the SET button.

• An item with the - - - icon has no sub-menus available for selection.

■

How to Use the Camera

RETURN

LENS

RET

BRIGHTNESS 40

3. Press the SET button to return to the previous menu.

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

■

How to Use the Camera

1. When the SETUP menu screen is displayed select EXPOSURE using the Up and Down buttons.

2. Select the desired mode using the Left and Right buttons.

● SHUTTER

1.The shutter speed is controlled manually.

2. Select 'FLK' mode when flickering occurs on the screen due to an imbalance between illumination and frequency. NTSC Model:1/100, PAL Model: 1/120

● AGC (AUTO GAIN CONTROL)

The higher the gain level, the brighter the screen - but the higher the noise.

- OFF,LOW,MIDDLE,HIGH can be selected

EXPOSURE

●

SENS-UP When it is night or dark, the camera automatically detects the light level

and maintains a clear picture if this mode is activated.

- OFF : Deactivates the SENS-UP function.

- AUTO : Activates the SENS-UP function.

●

BLC (Back Light Compensation) When there is a strong backlight behind the object, clear images of the

background as well as the object can still be obtained by using the BACKLIGHT function.

SETUP

LENS DC

EXPOSURE WHITE BAL ㅡㅡㅡ

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

EXPOSURE

SHUTTER BRIGHTNESS AGC SENSE-UP BLC D-WDR RETURN

1/50

ㅡㅡㅡ

MIDDLE AUTO OFF OFF RET

SENS-UP

SENS-UP RETURNX8RET

EXPOSURE

SHUTTER BRIGHTNESS AGC SENSE-UP BLC D-WDR RETURN

1/50

ㅡㅡㅡ

MIDDLE AUTO BLC OFF RET

BLC ON

BLC OFF

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

WHITE BALANCE

EXPOSURE

SHUTTER BRIGHTNESS AGC SENSE-UP BLC D-WDR RETURN

1/50

ㅡㅡㅡ

MIDDLE AUTO OFF OFF RET

Use the White Balance function to adjust the screen colors.

Position the cursor to point to WHITE BAL on the SETUP menu screen,

select using the Up and Down buttons.

2. Select the desired mode using the Left and Right buttons.

●󰼿

ATW(Auto Tracking White Balance) : This mode can be used within

the color temperature range 2,000˚K ~ 9500˚K

●󰼿

AWB(Automatic White Balance) : This mode can be used within the

color temperature range 1,800˚K ~ 11,000˚K

●󰼿

AWC SET : To obtain the optimum state under the current luminance levels, direct the camera to point toward a sheet of white paper and press the SET button. If the environment changes, including

the light source, the white balance will require re-adjustment.

●󰼿MANUAL : The manual adjustment mode enables finer adjustment. Select ATW or AWB first then change to manual adjustment mode and press the SET button. Set the appropriate color temperature then increase / decrease the red and blue colour values and monitor the color changes of the object.

●󰼿HSBLC (Highlight Suppress Back Light Compensation) If there is a high light installed in a limited environment such as an apartment parking garage or gas station entrance, removing the high light makes it possible to view car license plates efficiently.

●󰼿D-WDR By DWDR image processing techniques of input image, information of input image brightness value is analyzed, that part of relatively bright and dark images is judged and through different Brightness value mapping will have the effect of improving the contrast ratio.

(Please select INDOOR and OUTDOOR to fit the individual environments.)

●

󰼿RETURN : Saves the FUNCTION menu and returns to the SETUP menu.

HSBLC OFFHSBLC ON

HSBLC MASKING

■

How to Use the Camera

3. Select the desired mode using the Left and Right buttons and press the SET button.

BLC

GAIN DEFAULT LEFT/RIGHT WIDTH TOP/BOTTON HEIGHT RETURN

MIDDLE

2 4 3 3 RET

HSBLC

LEVEL DEFAULT LEFT/RIGHT WIDTH TOP/BOTTON HEIGHT RETURN

2 4 3 3 RET

SETUP

LENS DC

EXPOSURE

WHITE BAL ATW

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

Note

• When using a Video Auto Iris Lens, if the lens level is too low, automatic switching between Color and Black & White may not occur.

• If you press the Set button in "AUTO", AGC is disabled.

• The camera focus will "shift" marginally under infrared illumination at night. Always use an IR Corrective extra-low dispersion lens to obtain sharp pictures in color and monochrome.

SETUP

LENS DC

EXPOSURE

WHITE BAL ATW

DAY NIGHT

3DNR

SPECIAL

B/W

2. Select the desired mode using the Left and Right buttons. 󰼿󰼿󰼿●󰼿COLOR : The color mode is selected as the default, and the camera

does not change automatically. 󰼿󰼿󰼿●󰼿AUTO : This camera has a function which automatically changes to

the appropriate mode dependant on lighting levels. COLOR mode is selected during daylight and B/W mode at night time.

(Set START LEVEL and END LEVEL manually, as appropriate environment.)

󰼿󰼿󰼿●󰼿

EXTERN : This mode allows the application of a filter to external signals.

󰼿󰼿󰼿●󰼿B/W : Discards the color information and displays in black and white.

■

How to Use the Camera

WHITE BAL MANUAL

BLUE RED RETURN

21 15 RET

DAY NIGHT AUTO

DELAY S-LEVEL E-LEVEL RETURN

5 55 65 RET

Note

•

Under the following conditions White Balance may not work properly. In such cases, select the AWC mode.

①󰼿When the color temperature of the subject environment has a very high temperature range (e.g. clear sky, or sunset)

②󰼿When the ambient illumination of the subject is low. ③󰼿

If the camera is directed toward a fluorescent light, or is installed in a place where illumination changes dramatically, the White Balance

operation may become unstable.

Pictures can be displayed in either color or black and white.

1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' using the Up and Down buttons.

DAY/NIGHT

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

SPECIAL

Note

• When adjusting the noise reduction level in DNR mode, remember that the higher the level is set, the greater the reduction in noise level, but it also increases the possibility of ghosting.

DNR

1. When the SETUP menu screen is displayed, select 'SPECIAL' using the Up and Down buttons.

2. Select the desired mode using the Left and Right buttons.

󰼿󰼿󰼿●󰼿CAM TITLE: If a title is entered, the title appears on the monitor. 󰼿󰼿󰼿󰼿󰼿󰼿①󰼿

When the SPECIAL menu screen is displayed, use the Up and Down

buttons to point the cursor to ' CAM TITLE '.

󰼿󰼿󰼿󰼿󰼿󰼿②󰼿Set to 'ON' using the Left and Right buttons.

■

How to Use the Camera

3DNR

DELAY RETURN

50 RET

This function reduces the background noise in a low luminance environment.

When the SETUP menu screen is displayed, select 'DNR' using the

Up and Down buttons.

2. Select a desired mode using the Left and Right buttons.

󰼿󰼿󰼿● OFF : Deactivates DNR. Noise is not reduced. 󰼿󰼿󰼿● ON : Activates DNR so that noise is reduced.

Set the DNR mode to 'ON' and press the SET button. The noise reduction

level can now be adjusted.

SETUP

LENS DC

EXPOSURE WHITE BAL ㅡㅡㅡ

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

SETUP

LENS DC

EXPOSURE WHITE BAL ㅡㅡㅡ

DAY NIGHT

3DNR

SPECIAL

ADJUST

RESET

EXIT

B/W

SPECIAL

CAM TITLE D-EFFECT RS485 MOTION PRIVACY SYNC LANGUAGE RETURN

OFF

ON OFF INT ENGLISH RET

Note

• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if one has been entered.

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

- FREEZE : View still pictures.

- MIRROR : MIRROR,V-FLIP,ROTATE can be selected.

D-ZOOM : OFF(X1), ON(X2 to X32) can be selected.

GAMMA : Users can change the gamma settting in 0.5 steps,

between 0 and 1.0

NEG.IMAGE : NEGATIVE IMAGE or POSITIVE IMAGE can be selected.

󰼿󰼿󰼿●󰼿MOTION DETECTION: 󰼿󰼿󰼿󰼿󰼿󰼿󰼿This product has a feature that allows you to observe movements 󰼿󰼿󰼿󰼿󰼿󰼿󰼿of objects in 4 different areas on the screen, and the green shape 󰼿󰼿󰼿󰼿󰼿󰼿󰼿

appear. on the screen when movement is detected; hence a single

󰼿󰼿󰼿󰼿󰼿󰼿󰼿individual can conduct supervision efficiently. The camera detects 󰼿󰼿󰼿󰼿󰼿󰼿󰼿an object's movement by sensing disparity of outline, and level of 󰼿󰼿󰼿󰼿󰼿󰼿󰼿brightness and color.

■

How to Use the Camera

󰼿󰼿󰼿● D-EFFECT

D-EFFECT

FREEZE MIRROR D-ZOOM GAMMA NEG.IMAGE RETURN

OFF OFF OFF

0.45 OFF RET

Note

• If the cursor is moved to CLR and the SET button pressed, all letters

are deleted. To edit a letter, change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then press the SET button.

󰼿󰼿󰼿󰼿󰼿󰼿③󰼿Press the SET button.

󰼿󰼿󰼿󰼿󰼿󰼿④󰼿Use the 4 directional buttons to move to a chara cter, and select

it by pressing the SET button. Repeat this action to enter multiple characters. Up to 15 alphanumeric characters can be used.

SPECIAL

CAM TITLE D-EFFECT RS485 MOTION PRIVACY SYNC LANGUAGE RETURN

OFF

ON OFF INT ENGLISH RET

CAM LITLE

0123456789 BCDEFGHIJK LMNOPQRSTUV WXYZ▶󰼿󰼿󰼿󰼿󰼿󰼿󰼿󰼿( )

￣-＿

■/=&:~,.

CLR POS END

HAWK

MOTION

AREA SELECT AREA DISPLAY LEFT/RIGHT WIDTH TOP/BOTTON HEIGHT SENSITIVITY MOTION VIEW RETURN

AREA1 ON 13 32 4 24 34 OFF RET

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

ADJUST

RESET

󰼿󰼿󰼿●󰼿LANGUAGE Users can select their preferred language for the OSD menu from either, English, Korean, Chinese (Big5), Chinese (Simplified) or Japanese.

󰼿󰼿󰼿●󰼿RETURN : Select this to save the SPECIAL menu settings and return to the SET UP menu.

RESET : Resets the camera settings to the factory defaults.

EXIT

Press the SET button in the EXIT menu to save the current settings and exit the SET menu.

󰼿󰼿󰼿●

Sharpness : The sharpness of the image can be adjusted using the

left and right buttons. (32 steps) 󰼿󰼿󰼿●

BLUE : The blue color can be increased/decreased using the left

and right buttons. (100 steps) 󰼿󰼿󰼿●

RED : The red color can be increased/decreased using the left

and right buttons. (100 steps)

■

How to Use the Camera

󰼿󰼿󰼿● PRIVACY : Hide an area so that it is not displayed on the monitor. Set up using the 4 directional buttons.

- AREA SELECT : Up to 8 areas are selectable.

AREA DISPLAY : Determines whether to use the area selected in the

AREA SEL, and the size and position of the area.

󰼿󰼿󰼿● SYNC : In areas where the supply is 60Hz, synchronisation function

(Line-Lock),multiple cameras using the power synchronisation function

(Line-Lock),without using a synchronisation signal generator.

- INT : Internal Synchronisation Type

- L/L : Power Synchronisation Type, Line-lock

󰼿󰼿󰼿󰼿󰼿󰼿ㆍPress the SET button. 󰼿󰼿󰼿󰼿󰼿󰼿ㆍSelect a phase between 0 and 359.

- COLOR : Determine area color. Select any colors of 16.

RETURN : Select this to save the PRIVACY menu settings and

return to the SPECIAL menu.

ㆍ

Please select the area you wish to observe from the 4 areas in

AREA SELECT mode.

ㆍPlease select ON mode for the chosen area. ㆍPlease adjust the size of the area to be observed by using the

LEFT/RIGHT, WIDTH,TOP/BOTTOM,HEIGHT button.

ㆍPlease adjust the level of observation by using SENSITIVITY mode. ㆍ

Please press the RETURN button to save the changes and complete

the setting.

MOTION

AREA SELECT AREA DISPLAY LEFT/RIGHT WIDTH TOP/BOTTON HEIGHT COLOR RETURN

AREA1 ON 8 16 8 16 0 RET

SYNC

PHASE RETURN

0 RET

ADJUST

SHARPNESS BLUE RED RETURN

17 88 88 RET

■

Troubleshooting

Super DNR High Resolution Built-in Lens Color Camera Super DNR High Resolution Built-in Lens Color Camera

If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician.

Problem

Nothing appears on the screen.

The image on the screen is dim.

• Check the power connections.

• Check the VIDEO signal line connection.

•

Make sure the lens is clean. Clean the lens with a soft clean lint free cloth.

• Adjust the monitor contrast & brightness controls.

•

Re-position the camera if necessary.

The image on the screen is dark.

• Adjust the contrast control of the monitor.

•

If you have an intermediate device, set the 75Ω/ Hi-z properly.

The camera is not working properly, and the surface of the camera is hot.

• Check that an appropriate power source is connected to the camera.

The DAY/NIGHT menu does not work.

• Check that AGC in the EXPOSURE menu is set to 'OFF'.

The SENS-UP function does not work.

• Check that AGC in the EXPOSURE menu is not set to 'OFF'.

• Check that SHUTTER in the EXPOSURE menu is not set to 'FLK' or 'MANUAL'.

Solution

Problem

The Motion Detection function does not work.

Color is not correct.

• Check that MOTION DEF of SPECIAL SETUP menu is 'OFF'.

• Check the setting of WHITE BAL SETUP menu .

The screen flickers continually.

• Check that direction of camera turns toward the Sun.

Solution

Super DNR High Resolution Built-in Lens Color Camera

■

Specifications

O.S.D

Lens Mount

Operating Temperature / Humidity Storing Temperature / Humidity Dimension Weight

English, Korean, Chinese (Big5)

Chinese (Simplified) or Japanese

PAL

NTSC

CCD

Sync

Power Source

L E C

T R

I C A

AC24V / DC12V DC12V AC24V / DC12V DC12V

170mA(AC24V) / 260mA(DC12V)

160mA 170mA(AC24V) / 260mA(DC12V)

160mA

SONY 1/3" Super HAD High Sensitivity Color CCD

811(H) x 508(V) 795(H) x 596(V) 768(H) x 494(V) 752(H) x 582(V)

2:1 Interlace

Internal / Line Lock

Horizontal : 15.734 KHz, Vertical:59.94 Hz Horizontal : 15.625 KHz, Vertical:50.00 Hz

CS Mount (Easy Focus type)

(C Mount is mountable by using adaptor)

OFF / BLC / HSBLC

540 TV Lines

52 dB (AGC Off, Weight ON)

0.15Lux(40IRE Color), 0.0006Lux(40IRE Sense-upX256) at F1.2 ATW / AWB / AWC / Manual

1/60 ~ 1/120,000 sec 1/50 ~ 1/120,000 sec

AUTO / OFF (Selectable x2 ~ x256)

LOW / MIDDLE / HIGH / OFF

ON / OFF

ON / OFF (4 Zone, ALARM Output)

ON / OFF (8 Zones)

ON / OFF ON / OFF ON / OFF

ON / OFF (Level Adjustable)

DC / Video

COLOR / Black& White / AUTO / EXT

ON(x32) / OFF

-10˚C to + 50˚C / 30% to 80% RH

-20˚C to + 60˚C / 20% to 90% RH

64.0(W) × 57.4(H) × 115.8(D)mm

Appro. 240g

Size Total Pixels Effective Pixels Scanning System Synchronisation Frequency

Back-light Comp. Resolution S/N (Y signal) Min. Illumination White Balance

Electronic Shutter Speed

Sens-up Gain Control DNR Motion Detection PRIVACY V-REV H-REV FREEZE SHARPNESS IRIS Control Day & Night Digital Zoom

MEMO

■

MEMO

Printed in KOREA

Instruction Guide

Super DNR High Resolution

Built-in Lens Color Camera

Super DNR High Resolution Built-in Lens Color Camera

bettini T5365 Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual