Better Music Builder O-6, O-10 Owner's Manual

Passionate about Music

Better Music Builder is a leader in the Audio and Karaoke equipment industry. We are committed to offering you high quality audio products. Unlike any others brand, we deliver the best cost and value to you directly. We may update our manual on short notice, so we highly recommend downloading the latest update information including operation manuals, installation instructions, and other new technologies updates, etc. from our website www.BetterMusicBuilder.com.

OWNER'S MANUAL

OVAL SERIES

PRO-LOUDSPEAKER

2-Way Pro Speaker

O-6 6-inch WOOFER O-10 10-inch WOOFER

O-10

Better Music Builder

O-6

Your stylist Choice

Thank you for purchasing this unit. To make full and effective use of this unit, please read this Owner's Manual carefully before operating it. Please retain this manual for future reference.

w w w . B e t t e r M u s i c B u i l d e r . c o m

CONTENTS

INTRODUCTION............................................................................................................................................... 3

Intro

SYSTEM FEATURES

Features

SAFETY INSTRUCTIONS

Safet y

PACKAGE ACCESSORIES

Package

SYSTEM APPLICATIONS

Applic ations

• Methods of Speaker Connection

........................................................................................................................................... 3

............................................................................................................................. 4~5

................................................................................................................................ 6

.................................................................................................................................. 6

...................................................................................................................... 6

• Full Range Applications: Standard Format, Premium Format, Superior Format

• Connecting the Speaker with 3-D Positional Audio (Premium Format)

• Connecting the Speaker with 5-D Pro Audio (Superior Format)

CONTROLS AND FUNCTIONS

Speake r

...................................................................................................................... 9

• Front & Rear Panel Features for 2-Way Full Range Speaker Model

SYSTEM SETUP GUIDELINES

Set Up

• Installation Setup

.................................................................................................................................................... 10

1. Mounting the Speaker to the Ceiling

2. Mounting the Speaker to the Wall

3. Placing the Speaker on the Portable Stand

4. How to Open Grill Cover

........................................................................................................................ 10

............................................................................................. 10

................................................................................................. 11

................................................................................. 12

.................................................................................................................. 12

................................................. 8

............................................................. 8

O-6........................................... 9

O-10......................................... 9

.................................. 7

PHYSICAL DIMENSIONS

Dimens ions

SPECIFICATIONS

Spec

TROUBLESHOOTING

Troublesh ooting

FINAL WORDS TO USER

Final Word s

WARRANTY

Warrant y

AGENCY REGULATORY NOTICES

Notice s

CONTACT INFORMATION

Contac t Us

............................................................................................................................................ 13

..................................................................................................................................................... 16

.............................................................................................................................. 13

.............................................................................................................................. 14~15

.............................................................................................................................. 15

........................................................................................................................... 18

.............................................................................................................. 17

INTRODUCTION

Intro

Better Music Builder is proud to introduce a high-end Oval Series speaker line to the consumers in North America. This Oval Series speaker has two models (one with 6-inch woofer and the other with 10-inch woofer) in compact size with fashionable appearance and excellent vocal sound for singing. They are suitable for commercial use especially for classy nightclubs and bars.

The Oval Series speaker is also good for home entertainment. They work perfectly with both 3-channel and 5-channel amplifiers for both karaoke singing and home theater. Better Music Builder provides with you with high quality 3 and 5-channel amplifiers DX-222 G2 and DX-288 G2 (Generation Two) to match this Oval Series speakers.

The Oval Series is 2-way full range speaker system (both 6-inch O-6 Speaker and 10-inchn O-10 Speaker) with wide dispersion. Its sound is natural and clear while the cabinet is handy and compact with fashionable appearance. I It can be applicable in both small and medium sound format.

The Oval Series adopts two 3-inch new paper cone high frequency speakers which greatly enhance the performance and power loading capacity in the both mid and high frequencies. Both O-6 and O-10 speaker optimized the low frequency driver that can realize highest clearance and lowest distortion in high sound pressure. The 12 dB attenuation slope cross frequency circuit enables smooth frequency response. And the full range circuit protecting system provides higher security.

SYSTEM FEATURES

Features

2-WAY FULL RANGE PRO SPEAKER: O-6

• 2x3” tweeters [paper cone mid-high frequency drivers]

• 1x6” woofer [low frequency woofer]

• High intensity injection moulding cabinet

• Dispersion 140° x 160°

• Frequency response 80Hz~16kHz (-3dB)

• Sensitivity 88dB, Max SPL 120 dB

• Round hanging cover: Three 8mm screws size

• The cabinet is made from high intensity PP, the color for

cabinet and grill are various options

(Red / Silver / Black / Brown).

2-WAY FULL RANGE PRO SPEAKER: O-10

• 2x4” tweeters [paper cone mid-high frequency drivers]

• 1x10” woofer [low frequency woofer]

• High intensity injection moulding cabinet

• Dispersion 120° x 120°

• Frequency response 45Hz~20kHz (-3dB)

• Sensitivity 90dB, Max SPL 123 dB

• Round hanging cover: Three 8mm screws size

• The cabinet is made from high intensity PP, the color for

cabinet and grill are various options

(Red / Silver / Black / Brown).

The cabinet is injection molded with high intensity polypropylene. The delicate designed shape provides best structure strength and acoustic characteristics. There are four colors for the grill of the O-6 and O-10: red, silver, black and brown for your choice.

O--6

Better Music Builder

O-10

SAFETY INSTRUCTIONS

Safet y

We will not notify you any errors or changes in this manual in advance. If there are any errors and changes in this manual, we will make the corrections in a timely manner. The corrections and changes will be appeared in our website. Therefore, please visit our website at BetterMusicBuilder.com frequently to find out the most updated information, corrections on errors and changes in this manual. You may also contact us at toll free at 1-800-318-2218.

ABNORMALITY

• If the power cord or plug becomes frayed or damaged,

or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Better Music Builder service personnel.

• If this device should be dropped or damaged, immediately

turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Better Music Builder service personnel.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS

INSIDE REFER SERVICING TO QUALIFIED PERSONNEL

CAUTIONS FOR INSTALLATION

POWER SUPPLY / POWER CORD

• Only use the voltage specified as correct for the device.

The required voltage is printed on the name plate of the device.

• Use only the included power cord.

• Do not place the power cord near heat sources such as

heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

• Remove the electric plug from the outlet when the device is

not to be used for extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an

outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

LOCATION

• Always consult qualified Better Music Builder service

personnel if the device installation requires construction work, and make sure to observe the following precautions.

• Choose mounting hardware and an installation location

that can support the weight of the device.

• Avoid locations that are exposed to constant vibration.

NO GOOD

DO NOT OPEN

• Do not open the device or attempt to disassemble the

internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Better Music Builder service personnel.

WATER WARNING

• Do not expose the device to rain, use it near water or in

damp or wet conditions, or place containers on it containing liquids which might spill into an openings.

• Never insert or remove an electric plug with wet hands.

• Inspect the device periodically.

• When transporting or moving the device, always use two or more person. Attempting to lift the device by yourself

may damage your back, result in other injury, or cause damage to the device itself.

• Before moving the device, remove all connected cables.

• Do not use the device in a confined, poorly-ventilated

location. If this device is to be used in a small space

other than an EIA-standard rack, make sure that there is

adequate space between the device and surrounding walls or other devices; at least 30cm at the sides, 30cm behind and 30cm above. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even fire.

• Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury.

• Do no expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall over.

The speakers have coded terminals that accept a variety or wire connectors.

To ensure proper polarity, connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. Connect the – (black) terminals in a similar way. See the owner’s guides that were included with your amplifier, receiver and television to confirm connection procedures.

CONNECTIONS

• Before connecting the device to other devices, turn of the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

CAUTION

• When turning on the AC power in your audio system, always turn on the device LAST, to avoid speaker damage. When turning the power off, the device should be turned off FIRST for the same reason.

• Do not insert your fingers or hands in any gaps or openings on the device (ports, etc.).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device (ports, etc.). If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Better Music Builder service personnel.

• Do not use the device for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire.

• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force on the buttons, switches or connectors.

GETTING STARTED

WIRING

IMPORTANT: Do not reverse polarities (i.e., + to – or – to +)

when making connections. Doing so will cause poor imaging and diminished bass response.

ADJUSTING

Check the speakers for playback, first by setting the system volume control to a minimum level, and then by applying power to your audio system. Play a favorite music or video segment and increase the system volume control to a comfortable level.

NOTE

You should hear balanced audio reproduction across the entire frequency spectrum. If not, check all wiring connections or consult the authorized dealer from whom you purchased the system for more help.

The amount of bass you hear and the stereo-image quality will be affected by a number of different factors, including the room’s size and shape, the construction materials used to build the room, the listener’s position relative to the speakers, and the position of the speakers in the room.

Listen to a variety of music selections and note the bass level. If there is too much bass, move the speakers away from nearby walls. Conversely, if you place the speakers closer to the walls, there will be more bass output.

CARING

Each enclosure has a finish that does not require any routine maintenance. When needed, use a soft cloth to remove any fingerprints or dust from the enclosure or grille.

IMPORTANT: Make sure all equipment is turned off before making any connections.

For speaker connections, use a high-quality speaker wire with polarity coding. The side of the wire with a ridge or other coding is usually considered positive polarity

NOTE

If desired, consult Better Music Builder technical support for speaker wire and connection options.

PACKAGE ACCESSORIES

Package

The Package comes with one speaker, one mounting kit and four screws. All other accessories mentioned in the manual for installation purpose are not included. They are sold separately.

Mounting Kit: 1 pc

6mm Screw: 4 pcs

for mounting bracket

CUSTOMER SERVICE 29300 Kohoutek Way #150 Union City, CA 94587 U.S.A.

Passio nate abo ut Musi c

Better Music Builder is a leader in the Audio and Karaoke equipment industry. We are committed to offering you the high quality audio product. Unlike any others brand, we deliver the best cost and value to you directly. We may update our manual on short notice, so we highly recommend downloading the latest update information including operation manuals, installation instruction, and other new technologies updates, etc. from our website www.BetterMusicBuilder.com.

PLACE

STAMP

HERE

O-6

Better Music Builder

OWNER'S MANUAL

OVAL SERIES

PRO-LOU DSPEAKER

2-Way Pro Speaker

O-6 6-inch WOOFER O-10 10-inch WOOFER

O-10

Your stylist Cho ice

Better Music Builder

<Mail in U.S.A. only> Consumers from Canada

can get the warranty card by downloading it

Speaker: 1 pc

SYSTEM APPLICATIONS

Appli cation s

from our website w ww.BetterMusicBuilder.com.

SPEAKON Y CONNECTORS

INPUT OUTPUT

+ –

2–

1+ 2+

1–

– +

REFERENCE CONNECT

TO CHANNEL 2 SPEAKER

TO CHANNEL 1 SPEAKER

Speakon Outputs

The upper Speakon jack has both Channel 1 and Channel 2 outputs, so it is especially useful for parallel, bi-amp, or BRIDGE mono operation. The other Speakon carries only Channel 2's output. See the illustrations at above.

Consumer warranty

and registration card

SPEAKON CONNECTORS

INPUT OUTPUT

8 4 2

SOURCE

(from active/powered)

Source (INPUT) comes from the output source of the active/powered speaker while the bridge (OUTPUT) connects to the passive/non-powered speaker.

NOTE

A speakon cable is required to connect the “OUTPUT” of the acive/powered speaker to the “INPUT” of the passive/non--powered speaker. Please order the speakon cable from our authorized dealers.

Thank you for purchasing this unit. To make full and effective use of this unit, please read this Owner's Manual carefully before operating it. Please retain this manual for future reference.

w w w . B e t t e r M u s i c B u i l d e r . c o m

Owner's Manual

–

2–

1+ 2+

1–

REFERENCE CONNECT

BRIDGE

FULL RANGE APPLICATIONS

STANDARD FORMAT

2-WAY FULL RANGE SPEAKER

O-6

PREMIUM FORMAT

2-WAY FULL RANGE SPEAKER

O-6

SUPERIOR FORMAT

+ +

2-WAY FULL RANGE SPEAKER

O-6

Standard Format is a small format for sound performance. It is recommended using five O-6 speakers for home theater and karaoke singing. O-6 and O-10 speakers can also be used for commercial especially for small nightclubs and bars.

Premium Format is another format for high sound performance. Under this format, it is recommended using five O-6 speakers with a power subwoofer for home theater and karaoke singing for strong bass. This format by using O-6 and O-10 speakers are good for commercial especially for nightclubs and bars.

BASS POWERED SUBWOOFER

DFS-112 SUB

2-WAY FULL RANGE SPEAKER

O-10

BASS POWERED SUBWOOFER

DFS-112 SUB

Superior Format is the supreme format for sound performance. Under this format, it is recommended using both O-6 and O-10 speakers and also a power subwoofer to produce high level power output for home theater and karaoke singing. This superior format is good for commercial especially classy and elegant nightclubs and bars. Please refer to page 8 for detailed diagram.

2-WAY FULL RANGE SPEAKER

O-6

FREQUENCY RANGE

0W 1000W

MID

0W 1000W

LOW

0W 1000W

500W

300W

BASS POWERED SUBWOOFER

DFS-112 SUB

FREQUENCY RANGE

LOW/

0W 1000W

BASS

800W

2-WAY FULL RANGE

SPEAKER O -10

5-D PRO AUDIO DX-288 G2

CPU INTEGR ATED MIX ING A MPLI FIER DX-2 88 G2



KEY CONTR OL

MICROPHONE 1/4

1 GAIN B ASS MID T REBL E

2-WAY FULL RANGE

SPEAKER O -6

INPUT

ENTER

Passionate about Music

Better Music Builder

< PREV

PANEL SETTINGS

NEXT>



2 3GAIN BASS MI D TREBLE

G2 SERIES

Generation 2

POWE R

CENTER MONITOR

HD TV

MIN MIN MIN

DELAY REPEAT T IME REVERB

MAIN SELEC TOR

MAX M AX

MIC MASTER M USIC VOL UME

ECHO VOLUM E

FEEDBACK D ESTR OYER

ECHO EFFEC T

MUSIC TONEMICROPHONE 2/3/5

SUB BASS MID TREB LE

2-WAY FULL RANGE

SPEAKER O -6

MAX

2-WAY FULL RANGE

SPEAKER O -10

CONNECTING THE SPEAKER WITH 3-D POSITIONAL AUDIO (PREMIUM FORMAT)

Please refer to the diagram on the right for connecting the speakers to the 3-D Positional Audio system designed by the Better Music Builder engineering team.

With 3-D Positional Audio technology, user can actually experience the following effects:

• Music and sound effects are

live-like and real.

• Sound remains clear at low

volume.

• Reveals natural depth and

details.

• Music is natural and brilliant

with strong bass.

• Superior dialog clarity.

INPUT INPUT

2-WAY FULL RANGE SPEAKER O-10

NL4 SPEAKON TYPENL4 SPEAKON TYPE

CENTER MONITOR DFS-306

CPU INTEGR ATED MIX ING A MPLI FIER DX-2 22 G2





KEY CONTR OL

MICROPHONE 1/4

1 GAIN B ASS MID T REBL E

2 3GAIN BASS MI D TREBLE

INPUT

ENTER

Passionate about Music

Better Music Builder

< PREV

PANEL

SETTINGS

NEXT>

G2 SERIES

Generation 2

POWE R

MIN MIN MIN

ECHO VOLUM E

DELAY REPEAT T IME REVERB

MAX M AX

ECHO EFFEC T

MAIN SELEC TOR

MIC MASTER M USIC VOL UME

FEEDBACK D ESTR OYER

MUSIC TONEMICROPHONE 2/3/5

SUB BASS MID TREB LE

3-D POSITINOAL AUDIO DX-222 G2

NL4 SPEAKON TYPE

2-WAY FULL RANGE SPEAKER O-10

MAX

BASS POWERED

SUBWOOFER

DFS-112 SUB

CONNECTING THE SPEAKER WITH 5-D PRO AUDIO (SUPERIOR FORMAT)

Please refer to the diagram on the right for connecting the speakers to the 5-D Pro Audio system designed by the Better Music Builder engineering team.

The concept of 5-D Pro Audio technology is the same as that of the 3-D Positional Audio technology. The 5-D Pro Audio technology factors in the echo and reverb generated by the size and shape of the room as well as the materials used in the construction of the room into the Digital Signal Processing equation. The control feedback can easily be done from the front panel as with the adjustment of vocal and music effects between the center and main speakers.

2-WAY FULL RANGE SPEAKER O-10

NL4 SPEAKON TYPE

2-WAY FULL RANGE SPEAKER O-6

NL4 SPEAKON TYPENL4 SPEAKON TYPE

INPUT INPUT

CENTER MONITOR DFS-306

SUBWOOFER

DFS-112 SUB

CPU INTEGR ATED MIX ING A MPLI FIER DX-2 88 G2





KEY CONTR OL

MICROPHONE 1/4

1 GAIN B ASS MID T REBL E

2 3GAIN BASS MI D TREBLE

INPUT

ENTER

Passionate about Music

Better Music Builder

< PREV

PANEL

SETTINGS

NEXT>

G2 SERIES

Generation 2

POWE R

MIN MIN MIN

ECHO VOLUM E

DELAY REPEAT T IME REVERB

MAX M AX

ECHO EFFEC T

MAIN SELEC TOR

MIC MASTER M USIC VOL UME

FEEDBACK D ESTR OYER

MUSIC TONEMICROPHONE 2/3/5

SUB BASS MID TREB LE

MAX

5-D PRO AUDIO DX-288 G2

NL4 SPEAKON TYPE

2-WAY FULL RANGE SPEAKER O-10

NL4 SPEAKON TYPE

INPUTINPUT

2-WAY FULL RANGE SPEAKER O- 6

CONTROLS AND FUNCTIONS

Speak er

FRONT & REAR PANEL: features are available for 2-WAY FULL RANGE SPEAKER model O-6

O-6

O-6 Front View

3-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER

6-INCH WOOFER: PAPER CONE LOW FREQUENCY DRIVER

ROUND HANGING COVER: THREE 8mm SCREW SIZE

SPEAKER INPUT TERMINAL (NL4 Speakon TYPE)

FRONT GRILL COVER: AVAILABLE IN FOUR COLORS

O-6 Top View

[RED / SILVER / BLACK / BROWN]

CONNECT TO AMP.

REFERENCE CONNECT

O-6 Rear View

2–

1+ 2+

1–

O-6 Rear Connector

FRONT & REAR PANEL: features are available for 2-WAY FULL RANGE SPEAKER model O-10

O-10 Front View O-10 Rear ViewO-10 Top View

4-INCH TWEETER: PAPER CONE MID-HIGH FREQUENCY DRIVER

10-INCH WOOFER: PAPER CONE LOW FREQUENCY DRIVER

ROUND HANGING COVER: THREE 8mm SCREWS SIZE

SPEAKER INPUT TERMINAL (NL4 Speakon TYPE)

FRONT GRILL COVER: AVAILABLE IN FOUR COLORS [RED / SILVER / BLACK / BROWN]

O-10

CONNECT TO AMP.

2–

1+ 2+

1–

REFERENCE CONNECT

O-10 Rear Connector

SYSTEM SETUP GUIDELINES

Set Up

INSTALLATION SETUP

STEP : Place the ceiling mount panel on the top of the speaker cabinet and put three screws to fasten it.

Follow the steps described in the diagram for mounting the speaker to the ceiling and wall. Use the right screws to mount the speaker onto the ceiling or wall.

Please note that the ceiling and wall mounting accessories and tools are not included in the package. You may order it separately from our authorized dealers.

1. MOUNTING THE SPEAKER TO THE CEILING

STEP : Hold the ceiling mount panel under the ceiling, then put four screws to fasten it.

NOTE

The structure of the ceiling must be strong enough to hold at least 50 pounds.

Ceiling

8mm SCREW

Ceiling

6MM SCREW

Better Music Builder

CEILING MOUNT BRACKET

The ceiling mount bracket is optional. You may order it from our authorized dealers near you. Please note that the ceiling mount is different from the wall mount.

STEP : Four 6-mm screws come with the package. Three 6-mm screws already mounted on the speaker top. Only one 6-mm screw is provided for mounting kit as indicated in the following diagram.

Ceiling

MOUNTING KIT

6mm SCREW

Better Music Builder

NOTE

We recommend that the speakers be tiled at an angle, so that it aims at audience’s ear level in order to achieve the best accoustic quality.

ADJUSTABLE

ANGLE (Up & Down)

Ceiling

ADJUSTABLE

ANGLE

-6 dB

80 Degree

-6 dB

20 Feet

2. MOUNTING THE SPEAKER TO THE WALL

STEP : Place the wall mount panel on the wall and put three or more screws to fasten it.

This Wall Mount Bracket can be a Ceiling Mount Bracket

NOTE

The structure of the wall must be strong

Wall

enough to hold up to 100 pounds.

8mm SCREW

STEP : One 6-mm screw is provided for mounting kit as indicated in the following diagram. Make sure that you use the right kinds of screws to mount the speaker onto the wall or ceiling which are made up of different construction materials (i.e. wood or concrete, etc.).

MOUNTING KIT

6mm SCREW

Wall

Ceiling

ADJUSTABLE

ANGLE

Better Music Builder

CEILING MOUNT BRACKET

The wall mount bracket is optional. You may order it from our authorized dealers near you. Please note that the wall mount is different from the ceiling mount.

ADJUSTABLE

ANGLE (Up & Down)

ADJUSTABLE ANGLE (Left & Right)

STEP : Place the wall mount panel on the top of the speaker cabinet and put three screws to fasten it.

Wall

6mm Screw

Better Music Builder

Mounting to Solid Wood or Wood Studs

In North America, most of the houses have 2”x4” wood studs inside the panel walls. You may use stud finder to locate the wood studs. Then, you can drive the screw into the wood stud to mount the speaker bracket and hold it firmly.

PANEL WALL

2”X4” WOOD STUD

3. PLACING THE SPEAKERS ON THE PORTABLE STAND

The speakers can be mounted on to the optional portable stand, (see figure below). Make sure that the mounting system (hardware, stand, etc.) is capable of supporting four times the weight (approximately 25 lbs per speaker) of the speakers.

Floor Stand Mounting Kit Bracket

The speaker mount bracket for floor stand is optional. You may order it from our authorized dealers near you. Please note that the wall mount is different from the ceiling mount.

MOUNTING KIT

BRACKET

PARTS FOR MAINTENANCE

For repair and maintenance, you can order the following parts indicated with numbers below from our authorized dealers. The following parts include:

FRONT GRILL COVER: O-6

O-10 Part Number: 360EDO10COV-R

CABINET: O-6 Part Number: 360EDO6CNT O-10 Part Number: 360EDO10CNT

WOOFER (LF): O-6 Part Number: 06TP035-8 O-10 Part Number: 10LB075-U

TWEETER (HF): O-6 Part Number: 20100428 O-10 Part Number: ED4001A

CROSSOVER: O-6 Part Number: QS600ND100525048 O-10 Part Number: EGS015-42-B

FRONT GRILL COVER

Part Number: 360EDO6COV-R

O-6 Part Number: 360EDO6COV-W O-6 Part Number: 360EDO6COV-BL

O-10 Part Number: 360EDO10COV-W O-10 Part Number: 360EDO10COV-BL

CABINET

SPEAKER STAND

Part Number: AMS001B (Optional)

4. HOW TO OPEN GRILL COVER

STEP : Clench fist, and then knock the upper-right side of the cabinet with fist.

STEP : After the cabinet was knocked, the grill cover will be loosened and there will have a small gap between the cabinet and grill cover.

STEP : Insert a straight screwdriver into the gap, and pry the grill cover off the cabinet with the straight screwdriver.

CABINET

KNOCK THE UPPER-RIGHT

Better Music Builder

WOOFER (LF)

CROSSOVER

AMPLI FIER

TWEETER (HF)

BACK VIEWFRONT VIEW

4.7J 100V

MET CH

IN+

IN–

LOW–LOW+ HI2–

WOOFER

605J

MPT250

IN+

TWEETER TWEETER

FRONT VIEW BACK VIEW

(ph)2OW8ROJR4(ph)2OW8ROJ

O-6

CROSSOVER

065/60V

20W4ΩJ

4.7J 100V MET CH

10K/1W

HI1+H I2+HI1–

12.0J 250V MET CH

O-10

(ph)2OW8ROJ

CROSSOVER

(ph)2OW8ROJ

EGS015-42-B

TOP VIEW

GRILL COVER

AMPLI FIER

HI2–LOW–

IN–

LOW+

WOOFER TWEETER TWEETER

HI1– HI1+

HI2+

PHYSICAL DIMENSIONS

Dimen sions

2-WAY FULL RANGE PRO SPEAKER

Front View

O-6

Top View

MODEL

NET WEIGHT

SHIPPING WEIGHT

DIMENSIONS

(WXHXD)

PACKING

DIMENSIONS

(WXHXD)

SPECIFICATIONS

Spec

O-6

9.9 Lbs / 4.5 Kg (each)

11 Lbs / 5 Kg

(each)

15.7×9×9.4 in 40×23×24 cm

17.8×10.6×12.2 in

45.2×27×31 cm (each)

2-WAY FULL RANGE PRO SPEAKER

MODEL

COLOR AVAILABLE

RED

SILVER

BLACK

BROWN

O-6

O-10

19.8 Lbs / 9 Kg (each)

24.3 Lbs / 11 Kg (each)

21.7x12.4x13.2 in

55x31.6x33.6 cm

24.4x15.2x16.7 in 62x38.5x42.5 cm

(each)

O-10

15.7 inch 40 cm

Back View

15.7 inch 40 cm

9 inch 23 cm

Side View

9.4 inch 24 cm

15.7 inch 40 cm

Bottom View

9.4 inch 24 cm

15.7 inch 40 cm

9 inch 23 cm

9.4 inch 24 cm

O-10

TYPE

MAX. POWER

HANDLING

CABINET TYPE

SUPPORTED

FIXTURE

WOOFER [LF]

TWEETER [HF]

“SPOT” RANGE

FREQUENCY

RESPONSE

SENSITIVITY

CROSSOVER FREQUENCY

HIGHLIGHTED

FEATURES

Front

160~320 Watts

Polypropylene Injection

Moulding

Ceiling Mount,

Wall Mount,

Floor Stand

6” (1 unit)

3” (2 unit)

Compression Driver

80Hz ~ 16kHz

88 dB

2.5 kHz

Dynamic Vocal Effect

Front

300~600 Watts

Polypropylene Injection

Moulding

Ceiling Mount,

Wall Mount,

Floor Stand

10” (1 unit)

4” (2 unit)

Compression Driver

45Hz ~ 20kHz

90 dB

2.5 kHz

Dynamic Vocal Effect

Front View

21.7 inch 55 cm

Back View

21.7 inch 55 cm

12.4 inch

31.6 cm

12.4 inch

31.6 cm

Side View

13.2 inch

33.6 cm

Top View

13.2 inch

33.6 cm

21.7 inch 55 cm

Bottom View

13.2 inch

33.6 cm

21.7 inch 55 cm

12.4 inch

31.6 cm

TROUBLESHOOTING

Troublesh ooting

1. SYMPTOM: NO SOUNDS COMING OUT FROM THE SPEAKERS

Probable cause:

1. The A/C power of the speaker is not turned on.

2. Choose the wrong A/C power selection (i.e. 110V~ 220V).

Remedy:

A. Turn on the A/C power of the speaker.

B. Check the receiver or amplifier if it is on and the source is

playing.

C. Check all wires and connections between receivers, amplifiers and speakers. Make sure all wires are connected. None of the speaker wires are frayed, cut or punctured, and no wires are touching each other.

D. Review proper operation of your receiver or amplifier.

E. Choose the right A/C power.

2. SYMPTOM: NO SOUNDS COMING OUT FROM ONLY ONE SPEAKER

Probable causes:

The A/C power of the speaker is not turned on.

Remedy:

A. Check the "Balance" control on your receiver or amplifier.

B. Check all wires and connections between receiver,

amplifier and speaker. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured, and that no wires are touching each other.

C. In Dolby® Digital or DTS® mode, make sure that the receiver or processor is configured so that the speaker in question is enabled.

D. Turn off all electronics and switch the speaker in question with one of the other speakers that is working correctly. Turn everything back on, and determine whether the problem is in the same place: i.e., the speaker that was working previously now has no sound and the speaker that was not working now sounds fine; or whether it has moved; i.e., the speaker that was not working still has no sound and the speaker that was working is still fine. If the problem is in the same place, the source of the problem is most likely with your receiver or amplifier, and you should consult the owner's manual further information. If the problem has followed the speaker, consult your dealer for further assistance, or visit our web site for technical support.

3. SYMPTOM: NOISES FROM THE SPEAKER.

Probable causes:

The A/C power cord of the speaker is not grounded.

Remedy:

Change a new magnet cord of the A/C power cord.

4. SYMPTOM: MICROPHONE VOLUME IS TOO LOW.

Probable causes:

A. The microphone is poorly connected to the speaker.

B. The volume on the speaker is too low.

Remedy:

A. Check the connection between the microphone and the

speaker. Make sure that they are connected properly. For condense microphone, it doesn't work with the speaker. You may need to change to a dynamic vocal microphone.

B. Turn the volume to an appropriate level. If the volume is still not high enough, you may need to upgrade your existing audio system to a system with much higher output.

5. SYMPTOM: CRACKING NOISES FROM THE SPEAKER.

Probable causes:

The tweeter may burn out.

Remedy:

Change a new tweeter.

Note: we recommend you hiring a professional to help you change a tweeter in order to do it properly.

6. SYMPTOM: SOUNDS LIKE DAZZ, DAZZ, DAZZ ........

COMING FROM THE SPEAKER.

Probable causes:

The speakon cable (with small gauges) is over 100 feet for connection.

Remedy:

Change to a cable with 12 or 14 gauges or a high quality cable with bigger size.

7. SYMPTOM: TOO MUCH MICROPHONE FEEDBACK FROM THE SPEAKER.

Probable causes:

Incorrect tremble and bass adjustments on the speaker.

Remedy:

Adjust the tremble and bass to an appropriate level to avoid the microphone feedback.

FINAL WORDS TO USER

Final Word s

8. SYMPTOM: NO SOUND FROM THE MAIN SPEAKERS

Probable causes:

Speakon connectors are not connected properly.

Remedy:

Please make sure that the speakon connectors are locked it tight. Please also note that there are two groups of speakon connectors (i.e. Group 1 +1, –1, Group 2 +2, –2). Make sure that your speakers have the multifunction that enable the connection to the Group 2 for different signal inputs. The basic connection is on Group 1 (+1, –1).

9. SYMPTOM: SOMETIMES THE SPEAKERS HAVE NO SOUND.

Probable causes:

When the master volume closes to the maximum level, so the speaker automatically shut down with no sound. It is because this speaker has a built-in auto circuit to protect the speaker when the master volume becomes too high.

Remedy:

Change to a higher power amplifier to work with the speakers. Please make sure the output power of the amplifier can match that of the speakers. Another option is to add more speakers or subwoofers for higher output as below.

1. Add one more loudspeaker.

2. Add one more powered subwoofer.

We highly recommend you hiring an audio professional to advise you on the right engineering for the amplifier and speakers.

The engineering team of Better Music Builder has many years of experience in audio equipment design. The team constantly develops new audio technologies, designs innovative audio and Karaoke equipment to suit your specific needs and provides you great ideas for home entertainment.

Our engineering team also designs audio equipment for commercial use by restaurants, coffee shops, churches, and school auditoriums, etc. If the commercial area for audio equipment installation exceeds 2,000 square feet, we highly recommend you to hire audio professionals to handle the installation in order to avoid risks in breaking the equipment with improper installation and safety protection purposes.

We also provide educational and technical information on audio equipment and technologies. For example, we provide free installation diagrams to make it easier to connect the system. In addition, to get best connections for the sharpest image and sound quality, we provide hot tip for choosing the high quality type of A/V cable connections. Free information on audio equipment and technologies available for download from our website, ww w.Be t terMu sic B u i l d er.com.

Please do not remove the “Yellow Label” in the rear of the machine; otherwise, the warranty will be void automatically. We design it to protect your own safety. If repair and maintenance service is needed, please contact us directly or hire a professional technician. To learn more

Any form of

tampe ring with this

product, will void

the warr anty.

about the technical aspects, visit our website ww w.Be t terMu sic B u i l d er.com and download the relevant information for review.

Before hooking up the system, turn off the AC powers on all machines including audio/video equipment and TV. Otherwise, it may damage the equipment, especially on the HDTV in which a spot might appeared on the TV screen. After hooking up the system, double check the audio/video connections to ensure that they are connected correctly.

NOTE

Sometimes, loose or poor cable quality would affect the microphone effects, picture quality, or even cause the machine to shut down suddenly.

Again, we must thank you for choosing Better Music Builder product. We hope you can make the best use of the machine and enjoy it for years to come. If you have any questions regarding our product, please feel free to contact us at ww w.Bet terMusicB uil d e r.com.

WARRANTY

Warran ty

ONE-YEAR LIMITED WARRANTY FOR HOME USE EQUIPMENT

Our one-year warranty covers both parts and labors. The warranty becomes effective from the date of your purchase for one year.

Our warranty only covers defects due to product defectiveness with free of defects in materials or workmanship. However, our warranty does not cover defects due to normal wears, damage in transit, improper use, abuse or failure to follow the proper instructions for maintenance. This warranty is void in the event of unauthorized repairs, alternations, modifications and removing of the product label.

Please also note that our warranty does not cover any shipping cost for the return of defective products to us for inspection, repair and maintenance. Our warranty for Better Music Builder products can only be executed in North America.

90-DAY LIMITED WARRANTY FOR PUBLIC AND COMMERCIAL USE EQUIPMENT

Our 90-day warranty applies to speakers, amplifiers, mixers and microphones for both public and commercial use such as restaurant, coffee shop, KTV nightclub, church and school, etc. It covers both parts and labors. The warranty becomes effective from the date of your purchase for 90 days.

ADDITIONAL NOTES:

1. Limited warranty for home use equipment is only valid in

North America.

2. Limited warranty is valid only if you purchase our products from our authorized dealers (including both regular retailers and online retailers) in North America. If you choose to purchase our products from an authorized dealer, we will not provide any limited product warranty for you. To protect your limited product warranty, please purchase our products from one of our authorized dealers in North America near you.

3. Limited warranty is automatically void if the yellow label stating “No Warranty After Opening” is removed from the product.

TO REGISTER YOUR WARRANTY

Please fill out the warranty card that came with your unit, download or submit online warranty form. However, we need the invoice for your purchase in order to process this warranty. You may also register your warranty online. Please visit our website at ww w.bet t e rmusicbuilder.com.

AGENCY REGULATORY NOTICES

Notices

Federal Communications Commission Notice

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television

technician for help.

Modifications

The FCC requires the user to be notified that any changes or

modifications made to this device that are not approved may void the user’s authority to operate the equipment.

your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Japanese Notice

Japanese Power Cord Notice

Japanese Material Content Declaration

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.

Materials Disposal

Disposal of this material can be regulated because of environmental considerations. For disposal or recycling

information, contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).

Disposal Of Waste Equipment By Users In Private Households In The European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of

A Japanese regulatory requirement, defined by Specification

JIS-C-0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006.

Korean Notice

Recycling Program

The terms and availability of these programs vary by geography because of differences in regulatory requirements and local customer demand.

因为在当地的监管要求和客户的需求，这些条件和程序的情况不同。

CONTACT INFORMATION

Conta ct Us

MAILING ADDRESS

Bet ter Music Builder 2930 0 Ko houtek Way #150 Union Cit y, CA 94587 U.S.A .

TELEPHONE NUMBERS

USA Re gion USA Toll Fre e: 1- 8 00 -318-2218 Sale s & Marketin g: 510 -477-9955 Customer Se r vice: 510- 477-9955

FAX NUMBERS

USA Re gion Sale s & Marketin g: 510 -477-9922 Customer Se r vice: 510- 477-9922

WORLD WIDE WEB

E-mail: sa les@b ette rmusicbuild er.com We bsite: w ww.b ett e rmusicbuil d er.com

MAINTENANCE

With proper maintenance and regular service, it would maintain the machine quality and prolong its life. We recommend you to print the following information clearly for future reference on maintenance and warranty.

MODEL#____________________________ DATE PURCHASED (MM/DD/YYYY)_____________________________

DEALER NAME_____________________________ CITY_____________ ST./PROV._______ ZIP/P.C.____________

DEALER WEBSITE http://www.______________________________________________ INVOICE #_____________

DEALER PHONE #_____________________________ DEALER E-MAIL______________________________________

MAINTENANCE

NOTE

Unlike any others ... that’s cost & value for you

Pa ssi on at e a bo ut Mu si c

www. B e t terMusi c B u ilder.c o m

Thank you for purchasing this unit. To make full and effective use of this unit, please read this Owner's Manual carefully before operating it.

Please retain this manual for future reference.

360100804200

Better Music Builder O-6, O-10 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual