MATERIAL SAFETY DATA SHEET
WHIZ-LUBE HEAVY-DUTY LUBRICANT
BETTCHER |
6801 St. Rt. 60 |
Industries, Inc. |
Birmingham, Ohio 44816 |
|
|
SECTION 1 – PRODUCT IDENTIFICATION |
|
PRODUCT NAME: |
PRODUCT CODES: |
WHIZ-LUBE HEAVY-DUTY LUBRICANT |
185546 – 4 oz. Tube |
CHEMICAL NAME: |
185548 – 12 oz. Cartridge |
|
|
N/A |
|
CHEMICAL FAMILY: |
EMERGENCY PHONE NUMBERS: |
Petroleum Lubricant |
440-871-2188 |
|
800-992-2166 |
SECTION 2 – COMPOSITION / INFORMATION OF INGREDIENTS
The composition of this product is proprietary.
This product does not contain hazardous ingredients.
This product does not contain carcinogens.
SECTION 3 – HAZARDS IDENTIFICATION
|
HMIS HAZARD RATING: |
|
Health …………0 |
Flammability ……….. 1 |
Reactivity ……….. 0 |
EMERGENCY OVERVIEW:
Appearance/Odor: Transparent, Odorless
OSHA Regulatory Status: This material is not hazardous according to the OSHA Hazard Communication Standard, 29CFR 1910.1200
This product is a Food-Grade Petroleum Lubricant.
It is not expected to present any unusual hazards, in proper use.
SECTION 4 – FIRST AID MEASURES
INGESTION:
•Treat symptoms, may act as a laxative. Call physician.
EYE CONTACT:
•Flush eyes thoroughly with water for several minutes. Obtain medical attention if discomfort persists. If material is hot, treat for thermal burns and seek immediate medical attention
INHALATION:
•Clear airway. If respiratory difficulty persists, seek medical attention. This material has a low vapor pressure and is not expected to present an inhalation exposure at ambient conditions.
DERMAL:
•Wash skin with soap and water. Obtain medical attention if irritation persists. If material is hot, submerge injured area in cold water. If victim is severely burned, remove to a hospital immediately
1
ECN 9770 |
REV. |
A185550 |
Reaffirmed 2/09 |
|
|
|
MATERIAL SAFETY DATA SHEET |
|
WHIZ-LUBE HEAVY-DUTY LUBRICANT |
BETTCHER |
6801 St. Rt. 60 |
Industries, Inc. |
Birmingham, Ohio 44816 |
SECTION 5 – FIRE FIGHTING MEASURES
FLASH POINT: |
SPECIAL PROTECTIVE EQUIPMENT FOR FIRE |
• >300°F |
FIGHTERS: |
|
• Full protective clothing including self-contained |
|
breathing apparatus with full face-piece is required. |
EXTINGUISHING MEDIA: |
UNUSUAL FIRE AND EXPLOSION HAZARDS: |
• Suitable: Dry chemical, or CO2, |
• This product will burn if involved in a fire. This |
treat as an oil fire. Water may only |
product will float on water so water spray is not a |
be used to cool containers from |
suitable extinguishing agent as it may cause fire to |
heat |
spread. Dense smoke may be generated while |
• Unsuitable: Water jet. |
burning. Carbon monoxide, carbon dioxide, and |
|
other oxides may be generated as products of |
|
combustion. |
SECTION 6 – ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED :
•Floor may be slippery, use caution to avoid falling. Contain spill immediately. Do not allow spill to enter sewers or drains. Large spills may be picked up by using shovels, buckets, or other means and placed in drums or other suitable containers.
PERSONAL PRECAUTIONS :
• Eliminate sources of ignition.
ENVIRONMENTAL PRECAUTIONS :
• This product will float on the surface of water. Prevent from entering sewers or drains.
SECTION 7 – HANDLING AND STORAGE
PRECAUTIONARY NOTES :
•Handling: Keep drums closed to prevent contamination. May be slippery when spilled.
•Storage: Do not transfer to unmarked containers. Store in dry place with closed containers away from heat, sparks, open flame, or oxidizing materials.
OTHER HANDLING AND STORAGE CONDITIONS :
•None – No Special Conditions. Normal precautions common to safe manufacturing should be followed in handling and storage.
2
ECN 9770 |
REV. |
A185550 |
Reaffirmed 2/09 |
|
|