BETCO E85903-00 BAC PAC LITE, BAC PAC LITE, BAC PAC LITE E85903-00 Operator And Parts Manual
BAC PAC LITE
E85903-00
5 Liter Bac Pac
BAC PAC LITE
Vacuum
Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com
Operator and Parts
Manual
1001 Brown Avenue • Toledo, Ohio 43607-0127
1
TABLE OF CONTENTS
TECHNICAL INFORMATION ........................................... 3
GENERAL SAFETY ......................................................... 4
MACHINE PREPARATION AND OPERATION ................. 5
MACHINE DIAGRAM AND PARTS LISTING ..............6 - 7
WARRANTY ................................................................... 8
2
TECHNICAL DESCRIPTION Measurement Unit Bac Pac Lite
Tank Size Liter 5
Vacuum Motor HP 1.5 (1-stage direct)
Noise Level dB 65
Filtration Triple (Paper Bag, Cloth Bag & Motor)
Airfl ow CFM 120
Water Lift inches 100
Power Cord feet 50
Length inches 9.5
Width inches 10.5
Height inches 23.5
Weight lbs. 10.5
Tool Kit Included
Productivity sq. ft./hour 2,700
3
GENERAL SAFETY INFORMATION
When using an electrical appliance, basic precautions should always be followed, read all instructions before using.
! WARNING ! To reduce risk of fi re, electric shock, or injury:
• Keep children and unauthorized persons away from the machine when in use.
• This machine is not intended for use by persons (including children) with a lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the machine by a person responsible for their safety.
• Do not leave the machine when it is plugged in. Unplug the unit from the outlet when not in use & before servicing.
• To avoid electric shock, do not expose machine to rain. Store indoors.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If machine is not working as it should return it to a service center for inspection.
• Do not pull or carry by cord, use cord as a handle, close a door on a cord, or pull cord around sharp edges or corners. Do
not run machine over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or machine with wet hands.
• Do not put any foreign object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, & anything
that may reduce airfl ow.
• Keep hair, loose clothing, fi ngers, & all parts of body away from openings & moving parts.
• Turn off all controls before unplugging.
• Do not use in or around fl ammable or combustible liquids such as gasoline or use in areas where they may be present.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should electrically malfunction, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment-grounding conductor &
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed & grounded in accordance with
all local codes & ordinances.
! DANGER !
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualifi ed electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with
the machine. If plug will not fi t the outlet, have a proper outlet installed by a qualifi ed electrician.
Replace the plug if the grounding pin is damaged or broken.
Extension cords connected to this machine should be 12 gauge, 3-wire cords with 3- prong plugs & outlets. DO NOT use extension cords more than 50 feet long.
! WARNING !
The replacement or repair of damaged wiring should only be performed by a qualifi ed electrician or service engineer from the
original distributor or authorized service agent.
4
MACHINE PREPARATION AND OPERATION
PREPARATION AND OPERATION
• Unwrap the power cord completely & plug into a properly grounded outlet.
• Install paper fi lter bag.
• Attach swivel hose connector and hose to tank inlet.
• Attach appropriate cleaning tool.
• Turn switch to on position.
• You are now ready to begin your cleaning task.
AFTER USE
• Unplug the power cord, starting from the machine wrap the power cord onto the head assembly.
• Check paper fi lter, replace as necessary.
• Wipe the entire machine with a clean, damp cloth.
• Inspect the machine & all accessories for damage. Perform any required maintenance or repairs before storage.
• Store the machine in a clean, dry place..
5
MACHINE DIAGRAM
40
34
33
39
18
19
28
17
27
6
9
2
11
16
23
32
6
3
7
5
25
20
35
1
29
22
21
37
38
30
31
6
36
4
26
14
15
6
10
12
13
6
8
24
MACHINE PARTS LISTING
V
iew # BETCO # DESCRIPTION Ref.#
1 82952 THERMAL PROTECTION SWITCH A328-1400
3 82954 #10 .750 TYPE B PHILIPS PAN HEAD SCREW A352-8100
4 82955 #6 X .375 HI-LO PHILIPS PAN HEAD SCREW A352-8200
5 82956 #8-16 X 2.500 PHILIPS PAN HEAD SCREW A430-0205
6 82957 #8 X .625 HI-LO PHILIPS PAN HEAD SCREW A732-8300
3-253BSSENRAH REWOP1692801
006-253BGNITTIF OCYEH3692831
ILER NIARTS4692821
040-253BETALP KCAB8692871
H0792891
21 82972 SECONDARY FILTER PLATE B352-0800
22 82973 SECONDARY FILTER FRAME B352-0900
001-253BPAC RETLIF YRADNOCES4792832
BTNUOM ROTOM MOTTOB7792862
IWS0892892
30 82981 5.1" SINGLE STAGE TEK MOTOR A113-2600
32 82983 SHOULDER HARNESS STRAP B352-5800
34 82985 SHOULDER STRAP BUCKLE B352-6700
2853
36 82987 MOTOR SHROUD BOTTOM 5.1 - 1 STAGE B352-5300
37 82988 MOTOR SHROUD TOP 5.1 - 1 STAGE B352-5400
ES ROTOM9892883
39 82990 RIGHT SHOULDER HARNESS B352-5600
40 82991 LEFT SHOULDER HARNESS B352-5700
NOT ILLUSTRATED
hS toN
994-253CYLBMESSA HSURB TSUD49928nwohS toN
Not Shown 82996 BARE FLOOR TOOL ASSEMBLY C352-4400
SOH79928nwohS toN
Not Shown 82999 50' EXTENSION CORD 16-3 SJT YELLOW A134-0441
0033-253AHCTAL359282
4131-253BTSER KCAB859287
0042-253BRETLIF TSOP959288
0052-253BGAB REPAP069289
002
0016-253BLAES TNEMTRAPMOC GAB2692811
0086-253BFE
0010-253BTNEMTRAPMOC ROTOM5692841
0020-253BREPMUB6692851
0030-253BETALP TNORF7692861
0
0050-253BREVOC9692881
0060-253BTELNI ESO
0070-253BREVOC ROTOM1792802
0
0011-253BEMARF RETLIF TSOP5792842
0021-253BLAES YDOB6792852
0091-253
0084-253BLAES TELNI8792872
0041-253CGAB TUO EKAHS9792882
0082-253CSSENRAH HCT
5190-311BCP DUORHS ROTOM KET2892813
0066-253BTLEB TSIAW4892833
0081-253BTNUOM ROTOM POT689
0055-253BLA
0063-253BLOOT ESIVERC29928nwohS toN
0053-253BLOOT YRTSLOHPU39928nwo
0014-253CYLBMESSA LOOT TEPRAC59928nwohS toN
0063-253AE
0096-253BDNAW POCSELET89928nwohS toN
7
BETCO US WARRANTY POLICY
10 year coverage
Subject to the conditions stated below,
Betco warrants parts and labor on
rotationally molded polyethylene tanks/
housings and injection molded vacuum
head assemblies to be free from defects
in materials and workmanship for
a period of ten years to the original
purchaser.
Allowable Travel Time Warranty Reimbursement:
Eligible equipment: All battery and propane powered equipment products. Warranty period: 90 days from date of sale to the
original purchaser. A maximum 60 mile round trip at 44 cents per mile will be allowed for warranty consideration.
3 Year Coverage
Subject to the conditions stated below,
Betco warrants parts and labor on all
other Betco components to be free from
defects in materials and workmanship
for a period of three years to the original purchaser.
1 Year Coverage
Subject to the conditions stated below,
Betco offers a limited warranty on parts
and labor on the following equipment:
parts and accessories to be free from
defects in materials and workmanship
for a period of one year to the original
purchaser.
• DM Series Vacuums: #85506-00,
#85507-00
• Bac Pac Lite Vacuum: #85903-00
• FiberPRO® Floor Dryer: #85507-00
• WORKMAN™ Series Vacuums:
#85024-00, #85025-00, #85026-00,
#85027-00
• CV100T Vacuum: #85023-00
• All Tools and Accessories
• All Battery Chargers
• All Batteries are pro-rated for 1 year
Propane Machine Warranty:
Honda engines are warranted by Honda for a period of 2 years against manufacturer defects. Kawasaki engines are warranted
by Kawasaki for a period of 2 years against manufacturer defects. All other components (except wear items)* are warranted
by Betco for a period of 3 years.
*Wear Items exempt from Warranty consideration include but may not be limited to: power cords, transport wheels,
vacuum bags, belts, squeegee blades, pad drivers, clutch plates, handle grips, fi lters, screens, throttle cables, brushes
and carbon brushes.
Subject to the conditions and exceptions stated in this warranty, Betco warrants the Betco products to be free from defects in
material and workmanship, under normal use and service, for the periods listed under the warranty policy to the original purchaser. At any time during the warranty period, Betco will furnish replacement parts for the Betco parts to the original purchaser. Such parts will be furnished and charged including transportation costs, to the original owner through any Betco authorized
Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by
Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling.
Replacement parts that have become defective through wear or abuse are not included in this warranty.
This warranty does not apply to damage or defect caused by accident, misuse. Negligence, fi re, or to any Betco product which
has been serviced or repaired by other than an authorized Betco Service Distributor or Betco factory personnel. This warranty
is void if products are used for any purpose other than that which was intended. There are no other warranties expressed or
implied. In no event shall Betco be liable for incidental or consequential damages or any damage to person or property. (Please
note some states do not allow the exclusion or limitations for incidental and consequential damages)
8
Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com
1001 Brown Avenue • Toledo, Ohio 43607-0127
E85903-00 May11B
Loading...