Active Full Range Integrated Commercial Audiovisual System
SAFETY INSTRUCTIONS
PLEASE READ THROUGH THIS MANUAL FIRST BEFORE OPERATING THE CS-1 SYSTEM.
Thank you for purchasing this Beta3 product which will provide you with many years of reliable service. If you require
support for this product please contact your Dealer for assistance.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important
operating and maintenance (servicing) instructions.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated, dangerous voltage within the product’s enclosure that may be of sucient magnitude
to consistute a risk of electric shock to persons.
1. Read the instruction manual rst before using this product.
2. Keep this manual safe for future reference.
3. Pay attention to all warnings.
4, Follow all operating instructions correctly.
5. Do not expose this system to rain or moisture.
6. Only clean this system with a dry cloth.
7. Install only as per manufacturer’s instructions.
8. Ensure all ventilation openings are not blocked.
9. Do not install this system near any heat sources, such as a heater, burner, or any other equipment that radiates heat.
10. Use only spare parts supplied by the manufacturer. All servicing should be carried out by an approved Service
Technician to ensure warranty is not voided.
11. Pay attention to all safety symbols.
WARNING: This product must only be installed by professionals. When using hanging brackets or rigging
other than those supplied with the product, please ensure they comply with the local safety codes.
CREATING THE NEW NORMAL | Beta3 CS-1 User Manual www.elderaudio.com
2
CS-1
Active Full Range Integrated Commercial Audiovisual System
CONTENT
Introduction 4
Features 4
Description 4
Applications 4
Controller 5
Controller Functions 5
Controller System Operation 5
Amplier Module 6
Input Panel 6
Single CS-1 System Connection Diagram 6
Multi-System CS-1 Connection Diagram 6
Satellite Speaker Specication 7
Specication Data 7
Installation Guide 7
2D Illustrations 7
Subwoofer Technical Specication 8
Specication Data 8
Frequency Response Curve 8
2D Illustrations 9
Installation Examples 10
What’s In The Box?
Each box contains a complete Beta3 CS-1 Active Full Range Integrated Commercial Audiovisual System (CS-1), including
connection cables. You can extend the provided cabling if required.
n 1 x Sub Woofer speaker
n 1 x IEC Power cable
n 4 x Satellite speakers
n 4 x Speaker brackets
n 4 x Speaker cables
n 1 x Controller
n 1 x CAT5 cable
Product information is subject to change without prior notication. Please visit www.beta3.com
www.elderaudio.com Beta3 CS-1 User Manual | CREATING THE NEW NORMAL
3
CS-1
Active Full Range Integrated Commercial Audiovisual System
INTRODUCTION
Features:
n 4.1 Audio System
n 1 x Controller:
- Easy access to all functions
- Audio source selection, EQ and volume control, and navigation knobs
- Built-in touchscreen
- Built-in 8G of ram storage capacity to store media
- Store and replay music, picture and movie les
- AUX, LINE, MIC, USB three-way signal input and switching
- RCA video or HDMI display output
- readily connected to active subwoofer via RJ45 connector
n 4 x 2.75” Full Range Satellites:
- Can easily be adjusted up or down, left or right
- Comes with speaker cables
- Pre-wire cabling to custom bracket - easy press connection of satellite
n 1 x Active Band-pass Subwoofer
n Built-in Active Crossover and Limiter Control
n Protection for short circuit, over current and temperature
n Switch Mode Power Supply
Description:
The CS-1 is a versatile and rugged product. It’s compct system does not compromise the quality, functions or delivery of a
full bodied sound.
Setting the CS-1 up out of the box is very simple. You can have the whole system up and running in no time at all.
The CS-1 includes a user-friendly Controller that can control the system by touchscreen, button selection or a combination
of both. Programing is not required: simply load your media les onto the internal 8G SD card, select the function you
want and you are up and running.
An external display device supporting up to 1080P (such as TV Panel or Projector) can easily by connected to increase the
experience provided by the CS-1.
The system’s versatility is further enhanced by the provision of additional audio input sources.
A single CAT5 cable connects the Controller to the subwoofer.
You can easily expand the system by connecting a second CS-1 speaker system via CAT5 cable.
Application:
n Restaurants / Coee Shops / Cafés
n Conference Rooms
n Board Rooms
n Retail Outlets
n Multi-Function Halls
n Meeting Rooms
CREATING THE NEW NORMAL | Beta3 CS-1 User Manual www.elderaudio.com
4
CONTROLLER
Controller Functions
CS-1
Active Full Range Integrated Commercial Audiovisual System
Back Panel
1. HDMI output
2. VIDEO output
3. Left AUDIO output
4. Right AUDIO output
5. Port to connect Controller to Sub
6. Left AUDIO input
7. Right AUDIO input
8. Microphone input
9. Touchscreen
10. Navigation control: select, conrm, play and pause
11. MENU and POWER key
12. BACK key - return function
13. BASS gain
14. TREBLE gain
15. INPUT mode selection
AUX: input via 3.5mm (18)
CS-1: input from internal SD card and USB card via
socket (19)
LINE: input via 2 x RCA sockets (6) & (7)
16. Microphone volume
17. Master volume
Side PanelTop Panel
18. 3.5mm AUX input
19. USB port
Controller System Operation
Please refer to the Beta3 CS-1 Operation Manual for guidance on how to operate the Controller.
www.elderaudio.com Beta3 CS-1 User Manual | CREATING THE NEW NORMAL
5
CS-1
Active Full Range Integrated Commercial Audiovisual System
AMPLIFIER MODULE
Input Panel
Single CS-1 System Connection Diagram
1. Rear left satellite speaker output
2. Rear right satellite speaker output
3. Front left satellite speaker output
4. Front right satellite speaker output
5. Input RJ45 to connect Controller
6. Output RJ45 to connect to second CS-1
Multi-System CS-1 Connection Diagram
CREATING THE NEW NORMAL | Beta3 CS-1 User Manual www.elderaudio.com
6
CS-1
Active Full Range Integrated Commercial Audiovisual System
SATELLITE SPEAKER SPECIFICATION
Specication Data
System: Passive plastic speaker enclosure
System Component: 2 x 2.75” Full range loudspeaker
Frequency Response (-3dB)1: 220Hz-15kHz
Frequency Response (-10dB): 200Hz-18kHz
Sensitivity (1W@1m)2: 90dB
Max SPL (1m)3: 105dB/111dB (Peak)
Power: 30W (RMS)
60W (Music)
120W (Peak)
Rated Impedance: 8Ω
Cabinet: Plastic enclosure
Mounting Accessories: Specied wall bracket
Connector: Screw terminal on bracket
Cabinet Dimension (W x D x H): 90mm x 136mm x 180mm (3.5” x 5.4” x 7.1”)
Net Weight: 1kg (2.2lbs)
Installation Guide
2D Illustrations
To connect the satellites to the
subwoofer, please use the speaker cables
provided. One end of the speaker cable
has already been terminated with an RCA
plug; this is inserted into the appropriate
socket on the bottom of the subwoofer.
The bare ends of the speaker cable can
be secured to the terminal points on the
back of the speaker bracket (illustrated
as ‘Input -’ and ‘Input +’). Please ensure
you maintain the correct polarity for all of
your terminations.
Before attaching the speaker boxes to the
mounts, please ensure that the speaker
bracket is securely fastened to the wall/
ceiling surface.
The universal ball socket of the speaker
bracket allows freedom to ensure speaker
placement is maximised.
To attach the speaker to the bracket
simply press onto the pole mount
until you hear a ‘click’ securing the two
together.
www.elderaudio.com Beta3 CS-1 User Manual | CREATING THE NEW NORMAL
7
CS-1
Active Full Range Integrated Commercial Audiovisual System
SUBWOOFER TECHNICAL SPECIFICATION
Specication Data
Frequency Response (-3dB): 50Hz-220Hz
Max SPL (1m): 106dB/112dB (Peak)
System Conguration: 1 x 6” Woofer
Connector: RJ45
Input Type: RJ45 cable
Input Impedance (line): 10Kohm unbalanced input
Wire Connection: Pin 1: ground; pin2: signal +; pin3: signal - controller for mic
Heat Radiation: Fan air-cooled
Power Cable: IEC
Voltage Range: AC220V-240V 50Hz/60Hz
Cabinet: MDF
Painting: Cabinet coated by polyurethane paint
Cabinet dimension (W x D x H): 216mm x 480mm x 400mm (8.5” x 18.9” x 15.7”)
Net Weight: 15.5kg (34.1lbs)
Frequency Response Curve
CREATING THE NEW NORMAL | Beta3 CS-1 User Manual www.elderaudio.com
8
2D Illustrations
CS-1
Active Full Range Integrated Commercial Audiovisual System
www.elderaudio.com Beta3 CS-1 User Manual | CREATING THE NEW NORMAL
9
CS-1
Active Full Range Integrated Commercial Audiovisual System
INSTALLATION EXAMPLES
Retail Space
School
Coee bar
Restaurant
CREATING THE NEW NORMAL | Beta3 CS-1 User Manual www.elderaudio.com
10
NOTES:
CS-1
Active Full Range Integrated Commercial Audiovisual System
www.elderaudio.com Beta3 CS-1 User Manual | CREATING THE NEW NORMAL
11
Elder Audio Manufacture Company Ltd
Tel: +86 769 8906 1666 Fax: +86 769 8906 1669
#28 Xianghe Rd., Xiangshan Industrial Park, Dalang, Dongguan, Guangdong Province, 523800 China