Bestop 39341, 39331 User Manual
TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
For: Jeep® Wranglers 1997 and Newer Part Number: 39331 Vinyl
Jeep® is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat, please read all installation instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially dangerous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions provided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
39331/39341 pg 1
39341 Cloth
1201 Rev. B
Seat, Qty - 1
Parts List and Hardware Identification
Cotter Pin, Qty - 2
Tools Needed
Adjustable Wrench or
1/2" Wrench
13mm Wrench
8mm Flat Washer,
Qty - 4
M8-1.25 x 35mm Bolt, Qty - 4
Lock Down
Bracket, Lt.,
Qty - 1
Lock Down
Bracket, Rt.,
Qty - 1
Note: Use only the Bestop hardware
provided in the kit.
Floor Mounting
Bracket, Lt., Qty - 1
Installation Instruction
Manual, Qty - 1
TrailMax™ Fold and Tumble
Rear Seat
Installation Instructions
For: Jeep® Wranglers 1997 and Newer Part Number: 39331 Vinyl
Jeep® is a registered trademark of Chrysler and
Bestop is not affiliated with Chrysler Corporation.
WARNING
Before you begin installing this seat, please read all installation instructions and warnings thoroughly.
This seat is designed to be used on the model vehicles
described above. Use of this seat on any other vehicle or
failure to install this seat properly may result in an improperly
mounted seat and could result in unexpected movement of
the seat and loss of control of the vehicle, thereby placing the
occupants of the vehicle and others in a potentially dangerous situation.
This seat system is intended to be used with seat belts at all
times. Do not rely on the seat to maintain the seating position
of occupants, in the event of an accident.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions provided when installing this product. Failure to do so may result
in a poor fit and could place occupants of the vehicle in a
potentially dangerous situation.
39331/39341 pg 1
39341 Cloth
Floor Mounting
Bracket, Rt.,Qty - 1
5/16-18 x 1 1/4" Bolt, Qty - 4
Caution
0300 Rev. A
Note: Before beginning the seat installation, set the
parking brake, place the vehicle in gear or park and
chock the wheels to reduce the risk of the vehicle
unexpectedly moving, which could result in serious injury.
39331/39341 pg 2
1201 Rev. B
Loading...