Thank you very much for choosing our company’s mobile phone! This phone is a
mobile phone with Dual SIM Cards, Dual Standby and Single Channel.
Our products confirm to the Industry Standard for Communication in PRC as well as
European Standard. They shall be applicable to GSM network after they have been
approved.
The GSM network is a kind of international standard global cellular communication
system. Your mobile phone can access multiple international networks. It allows you to
make or receive international calls, just like using in your own hometown. However,
services required must be applied for and purchased before you can enjoy these
advanced functions provided by the network.
To make better use of your mobile phone, we suggest you read this instruction
carefully, so as to take full advantage of various functions introduced in this instruction.
In view of network configuration of the mobile phone and services provided by it,
some functions may not be allowed to use, please consult vendor or network operations
company.
2. Security Requirements
If your mobile phone is lost or stolen, inform immediately the telecom branch or its
outlet to forbid the use of your mobile phone and SIM card, which will help you to avoid the
economic loss caused by other’s misuse of your telephone.
When you get contact with the telecom branch or its outlet, they need to know the
IMEI number of your mobile phone, which is marked on the tab on the back of your mobile
phone (you can find it with battery taken out). Keep the number for future use.
Please take precautionary measures to use your mobile phone more safely. Such as:
Set SIM and PIN to avoid the abuse of your SIM card.
When you leave your car, please do not put the mobile phone in a place easy to be seen.
Better take it with you or put it in trunk.
n Security Warnings and Precautions
Please read these precautions with care before you use your phone to ensure that you will
use it correctly.
3
n General Precautions
In the places where the use of mobile phone is forbidden, such as on the airplane and
in the hospital, please turn off your phone as it requires, otherwise it shall compromise
normal operations of electronic devices and medical instruments. Please observe the
relevant specifications of this location in case you should use your phone.
Please strictly adhere to local rules and regulations on the use of mobile phone when
you are driving. Please follow the rules below in case you should use your phone when
you are driving: focus on driving and pay attention to the road condition; if your phone has
a function of handsfree, please use it for conversation; if you are in bad driving condition,
please park your car first, and then make or receive a phone call.
Near the places with fuels, chemicals or explosive substance, please observe laws or
regulations and related signs.
Please keep your phone, battery and charger in a place that children will be difficult to
touch, to avoid they play it as a toy, thus causing physical harm.
Your phone can only be used with specified battery, charger and other accessories
from our company, to avoid any damage to your phone. In case of using other batteries
and chargers, it shall be possible to cause failures, such as battery leaking, overheating,
bursting and flaming.
Please do not use your phone near weak signals or high precision electronic devices.
Radio interference of mobile phone may be subject to cause misoperations of these
electronic devices and other problems. You should pay special attention, especially near
the following devices: hearing aid, artificial pacemaker and other medical electronic
devices, fire detector, automatic door and other automatic control units. Detailed
information about impact on devices, please consult the manufacturer and local vendor of
that device.
Please do not strike, shock or throw your phone violently, so as to avoid failure and
flaming of your phone.
Please do not put your phone, battery and charger into microwave oven or high
voltage equipment, otherwise it may be subject to cause accidents, such as circuit
damage and flaming.
Please do not use your phone in any places with flammable and explosive gas,
otherwise there is a risk of phone failure and fire.
Please do not place your phone in any place with high temperature, high humidity
and high dust content, otherwise there is a risk of phone failure.
Please do not place your phone in any unstable position, so as to prevent it from
4
falling and causing any failure or damage.
n Precautions on Mobile Phone Usage
Do not remove or refit your phone, or it may be subject to cause damage, electrical
leakage and circuit failure. If it is necessary, please send it to specialized maintenance
points. Non-professionals shall not remove the phone arbitrarily.
Please do not hit the LCD forcefully or use it to hit other things, or the liquid crystal
panel will be broken and the liquid will leak. There is a risk of loss of sight if the liquid got
into your eyes. Please wash your eyes with clean water immediately in this occasion
(never knead your eyes), and see doctor right away.
In rare cases, there is a reverse effect on the in-car electronic devices when the
phone is used in some models car. At this point, please do not use your phone, so as not
to lose the security insurance.
If your car is equipped with an air bag, please do not put your phone on the air bag or
any areas that the air bag can touch after its deployment, so as to avoid the phone will
withstand a strong external force when the air bag deploys, and thus causing a serious
injury to the car owner.
Please do not use any sharp objects such as needle and penpoint to touch the
buttons, or it may be subject to damage the phone or cause misoperations.
Avoid your phone being too near any magnetic objects such as magnetic card,
radiated waves of your phone may clear the information stored in your floppy disk,
stored-value card and credit card.
Please put small metallic products such as drawing pin far away from the handset of
your phone. The loudspeaker has a magnetic property while working, which will
magnetize these small metallic products, and thus cause physical injury or phone
damage.
Avoid your phone being exposed to moisture, or any water and other liquid getting
into it, and thus causing short circuit, electrical leakage and other failures of your phone.
Please use your phone in a place far away enough from fixed telephone, TV, radio
and official automatic equipment, so as not to affect the performance of these devices and
your phone.
n Precautions on Battery Usage
Please do not remove or refit the battery, or it may be subject to cause leaking,
overheating, bursting and flaming of the battery.
Do not put used batteries in household garbage. In any locations with explicit
5
specifications of used battery treatment, please handle them in accordance with the
specified instructions.
Please do not throw the battery into fire, which may cause fire and explosion.
Do not exert pressure forcibly while assembling your battery, or it will cause leaking,
overheating, bursting and flaming of your battery.
Please do not use any metallic products such as wire and needle to make the battery
short circuit; and do not put the battery together with any metallic products such as
necklace, otherwise it will cause leaking, overheating, bursting and flaming of your battery.
Please do not weld contacts of the battery, otherwise it will cause leaking,
overheating, bursting and flaming of your battery.
There is a risk of loss of sight if the liquid of the battery got into your eyes, please do
not knead your eyes with your hands, but wipe up with dry towel, and then see doctor right
away.
Please do not use or put your phone in any places in high-temperature such as
around fire and heater, otherwise it will cause leaking, overheating, bursting and flaming of
your battery.
If phenomena such as abnormal warming, discoloration and deformation occur while
the battery is in use, charging or storage, please stop using the battery and replace with a
new one.
If the leaky liquid of the battery contacts with your skin and clothes, which may burn
the skin, wipe up with dry towel immediately, if necessary, see doctor right away.
If there is leaky liquid or a strange odor of the battery, please take it far away from
open fire, so as to avoid fire and explosion.
Please do not expose the battery to moisture, or it will cause overheating, smoking
and corrosion of the battery.
Please do not use or place the battery in any places with high temperature such as in
direct sunlight, or it will lead to liquid leakage and overheating, and thus reducing its
performance and shortening its lifespan.
Please do not charge continuously more than 24 hours.
Please store the battery in a cool, well–ventilated area without direct sunlight.
The lifespan of the battery is limited. It shortens gradually as the battery is charged
frequently. It indicates the lifespan of the battery expires when it is of no effect by several
times' charging, it should be replaced with a new one in specified model.
n Precautions on Charger Usage
6
Please do not remove or refit the charger, otherwise it will cause physical harm,
electric shock, fire and damage to the charger.
Please use a 220V alternating current. Using other electric voltages will cause
electrical leakage, fire and damage to your phone or the charger.
It is forbidden to make the charger short circuit, which will cause electric shock,
smoking and damage to the charger.
Please do not use the charger in the condition of broken electric power line, or it will
cause fire and electric shock.
Please clean up any dust accumulated on the socket duly.
Please do not put the container of water around the charger, so as to avoid the water
spilling and thus causing short circuit, electrical leakage and other failures of the charger.
If the charger contacts with water or other liquid, cut off the power supply immediately
to avoid short circuit, fire, electric shock and failure of the charger.
Please do not use the charger in any places with high humidity such as the bathroom,
or it will cause electric shock, fire and damage to the charger.
Please do not touch the charger, the electrical wire and the socket with wet hands, or
it will cause electric shock.
Do not put any weight on the electric power line or refit the electrical wire, otherwise it
will cause electric shock and fire.
Please pull the plug of the charger out from the supply socket before cleaning &
maintenance.
Grasp the charger while pulling the plug, as pulling the electric power line will damage
the electrical wire, and thus causing electric shock and fire.
Please do not charge at the following positions: places with high temperature such as
in direct sunlight; places with moisture and dust and violent vibration (where it will cause
failure); near electrical appliances such as TV set, radio (where it will compromise the
picture and sound).
n Cleaning & Maintenance
Please do not use your phone, the battery and the charger in any places with high
humidity such as in the bathroom, and at the same time avoid them being moistened by
rain.
Please clean your phone, the battery and the charger with soft dry cloth.
Please do not wipe your phone with any chemical reagents, such as ethanol, diluent
and benzene.
Dirty socket will cause imperfect contact or power down, so that it is impossible to charge,
7
please clean it periodically.
3. Getting Started
nI/O interface
There are three I/O interface at the bottom of the phone, charger jack for the left, the
middle I/O for the charger and the USB jack, headphone jack for the right.
nTorch
There are two torches at the top of the phone, you can press the Space-key to
open/close the torch.
nInstalling the SIM Card
· Keep all miniature SIM cards out of the reach of small children.
· The SIM card can be easily damaged by scratches or bending. So be careful when
inserting, removing or handling the card.
· Before installing the SIM card, always make sure that the phone is switched off and
then remove the battery.
Face the back of the phone, locate the SIM card holder, and then insert the SIM card
into the slot (in the direction shown by the arrows in the picture).Make sure that the gold
contacts of the card face into the face when installing the card.
nInstalling the T-FLASH Card
Keep the T-FLASH card out of the reach of small children.
· The T-FLASH card can be easily damaged by scratches or bending. So be careful
when inserting, removing or handling the T-FLASH card.
The machine T-FLASH card slot is located inside the fuselage, the T-FLASH card into
the T-FLASH card slot..
nRemoving and Installing the Battery
·The steps of removing the battery:
① Slide upwards and hold the battery cover on back of the phone.
② Life the top of the battery and remove it from the battery tank.
Warning: Make sure that the phone should be switched off before removing the
battery. It’s absolutely prohibited to remove the battery when the phone is switched
on or connected to external power source, otherwise the SIM card and the phone
8
will be damaged.
Do not place the battery in fire ; follow local laws and ordinances in Disposing used battery.
Check the model number of the charger before using it to charge the mobile.
Only use approved battery , charger and accessories applicable to the specific mobile model .
Using other types of battery , charger and accessories may violate the certification or
warranty terms of the accessories may violate the certification or warranty terms of the
equipment and may result in danger .
Return waste and used batteries to the supplier or specified recovery site .
CAUTION!
Risk of explosion if battery is replaced by an incorrect type .
Dispose of used batteries according to the instructions .
· The steps of installing the battery:
① Insert the teeth on the bottom of the battery into the corresponding slots in the
battery tank, and then push the battery until it clicks into place.
② Put on the battery cover and slide the cover downwards until it clicks into the
phone.
nCharging the Battery
Plug in the charger to charge the charge in the bottom of the phone interface ,After
inserting the charger plug, a battery icon appears on the upper right corner of the screen,
indicating that the battery is charging. When the strip on the icon stops rolling and shows
no empty space, the battery is fully charged. Pull the charger plug straight out after the
battery is fully charged.
· When the battery is weak, a warning message appears on the screen and the battery
icon becomes blank. When the battery becomes too weak for the operation, it switches
off automatically. Don’t let the battery low for a long time, otherwise the quality and
working life of battery will be harmed.
· Use the battery charger designated by the manufacturer to ensure the normal
operation of the phone.
nSwitching the Phone On/Off
Hold down the on/off key for certain time to switch the phone on/off.
Note: Do not switch on the phone in the places where you are prohibited from using it
or the use of the phone may cause disturbance and risks, and you’d better remove the
battery in such a case.
9
◇ If you switch on the phone without inserting the SIM card in advance, the message
of “No SIM Card” appears on the screen.
◇ If your SIM card has activated PIN, the message of “Enter PIN” appears on the
screen when you switch on the phone.
◇ Note: If you enter the wrong PIN three times in a row, the message “PIN
BLOCKED” appears. To unblock it, you need to enter your PUK, and you can contact your
network operator for personal unblocking message.
◇ If your phone is out of the service area, the message of “No Network” appears on
the screen. In this case, you can’t make or receive calls until you enter the service area
and regain the network service.
4. Call Functions
Click to dial in the idle screen, enter the number into the dial, select the button below SIM1
or SIM2 dial for the number of dial; addition, you can dial the number for your store, you
can select SIM card or there is need to phone. When you need to enter the number to
delete, please click remove characters. Enter the number, press the "+" button, then
enter the country code, area code and phone number, click the dial button to dial an
international number.
Enter the number, Press "P" key you can insert a pause the second number "P" (such as
between the switchboard and extension), then the number will be asked to enter
extension number is sent out.
Note: If you set the auto redial function, no answer or the line is busy, the phone will
automatically redial the number, and allows the call after the failure of the automatic redial
function.
When you want to end the call, please hang up button. After the call, the display will show
the talk time.
Introduction of Input Method
5. Introduction of Input Method
The Mobile phone provides various types of input patterns for data or letter entry in
many functions, e.g. add/edit phonebook records, seek Chinese name, edit SMS and
schedule, etc.
Enter text-editing interface and select input method needed. Click input method name
button and handwriting button on the screen with stylus to switch. Input methods include:
letter input, figure input
10
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.