BeStar Model Name
Product No.
Issue No. BS/TEP01.534A
Issue Date
Approval:
1.Characteristics
2.Dimension
3.Reliability Test
4.Tape on Reel Packing
5.MSL rating and Notice
6.History change record
Drawn by
Checked by
Approved by
BSP1313-05H2.5-02 LF
036402
07/11/29
Customer approved
赵 峥
For conform to the European Union Directive on the Restriction of Hazardous Substances(RoHS), this type of
productions forbid use all the hazardous substances as follow:
Lead
Cadmium
Mercury
Hexavalent chromium
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
1.2 Electrical and Mechanical Characteristics
No. Item Specification
1. Rated Voltage(Square Wave) 5 Vp-p
2. Operating Voltage 1...25Vp-p
3. a)Rated Current max.3mA
4. Capacitance at 120Hz 16±30%nF
5. a)Sound Output at 4.1KHz,10cm Min.75dB
6. Resonant Frequency 4.1 KHz
H
G
Colour: white
F
E
7. Operating Temperature -40...+105°C
8. Storage Temperature -40...+105°C
9. Weight 0.5g ±25%
D
a)Value applying at rated voltage.(5Vp-p square wave,1/2duty)
D
1.3 Test method:
and shall not be used in whole or in part without its written content
Standard test Fixture
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
No reaction in space with in 400mm in all direction
Sounder
100mm
400mm
C
B
Date:
Drawn by:
A
Rev.
07/11/29A
赵 峥
Drawn Date
Note
BESTAR ELECTRONICS INDUSTRY CO.,LTD
Checked by:
Approved by:
www.be-star.com wu@be-star.com
654
07/11/29
赵 峥
陶红仲
张秀琴
3
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
A
Page:1 of 6
Page 3
6
5
4
3
2
1
632541
H
BSP1313-05H2.5-02 LF
H
1.4 Frequency Response(Square wave 5Vp-p 10cm)
G
F
E
90
dB SPL
80
70
60
50
40
1K10 KHz 20K
G
F
E
2. Dimension
Tolerance:0.3 Unit:mm
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
Masking Iabel
B
13.0
2.0
13.02.0
2.5
land pattern
17.5
12.5
+1.5°
-1.5°
flatness of solder pads 1.5
2.5
D
C
B
Date:
Drawn by:
A07/11/29
A
REV.
Date
赵 峥
Drawn
Note
BESTAR ELECTRONICS INDUSTRY CO.,LTD
Checked by:
Approved by:
www.be-star.com wu@be-star.com
07/11/29
赵 峥
陶红仲
张秀琴
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
A
Page:2 of 6
Page 4
6
5
4
3
2
1
564231
H
BSP1313-05H2.5-02 LF
H
3. Reliability test
3.1 high temperature test
Temperature +105 C
Duration 240hrs
G
3.2 low temperature test
Temperature -40 C
Duration 240hrs
3.3temperature cycle test
-40 C
F
30min
+20 C
15min
+105 C
+20 C
15min30min
Cycles 5
3.4 Humidity test
Temperature +40 C
Relative Humidity 90~95%
Duration 240hrs
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
all these tests above should be measured after leaving normal temperature for 2hrs.
3.5 Vibration Test
Vibration Frequency 10~55Hz
Amplitude 1.52mm
Duration 2hrs each of 3 axis
3.6 Drop test
Height 100cm
(to 10mm thickness woodenboard)
Direction 3
3.7 Solderability
Temperature 2555 C
Duration 30.5sec
3.8 Operating Life
Rated input voltage and frequency
Duration 96hours
3.9 Shock
Sounder shall be measured after being applied shock(100m/s2)for each three mutually
perpendicular directions to each of 3 times by half sine wave
3.10 Lead pull
The part shall be pushed with a force of 9.8N for 10±1 seconds behind the part
G
F
E
D
C
B
Notice: All specification must be satisfied in this condition.
SPL: allowable deviation 5dB of the initial value after testing
B
Date:
Drawn by:
A07/11/29
A
REV.
Date
赵 峥
Drawn
NoteApproved by:
BESTAR ELECTRONICS INDUSTRY CO.,LTD
Checked by:
www.be-star.com wu@be-star.com
07/11/29
赵 峥
陶红仲
张秀琴
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
A
Page:3 of 6
Page 5
6
5
4
3
2
1
651324
BSP1313-05H2.5-02 LF
H
3.11 Recommended Temp. Profile for Reflow Oven
175 10 C
G
4. Tape on Reel Packing
4.1 packing drawing
F
E
Dimensions of carrier tape
4±0.1
2±0.1
225 C
903s
250 5 C
+0.1
0
1.5
3010s
101s
260 C Max
B
H
G
F
1.75±0.1
11.5±0.1
B-B
E
AA
24
17.3±0.1
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
Dimensions of reel
33.5 Max
330 Max
Diameter
16±0.1
Min.
B
1.5
The cover film peel strength force 0.1-0.7N
The cover film peel speed 300mm/min.
C
Components
13 0.2
B
25.5
100 0.5
Trailer160-200
Cover Film
240~280
Empty
400-560 Leader
0.35±0.05
13.2±0.1
max5
A-A
°
D
2.9±0.1
C
B
Unit:mm
Date:
Drawn by:
A07/11/29
A
REV.
Date
赵 峥
Drawn
Note
BESTAR ELECTRONICS INDUSTRY CO.,LTD
Checked by:
Approved by:
www.be-star.com wu@be-star.com
07/11/29
赵 峥
陶红仲
张秀琴
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
A
Page:4 of 6
Page 6
435621
BSP1313-05H2.5-02 LF
H
G
F
4.2 packing quantity
4.21 1000pcs/reel
4.22 5reel/carton
4.23 5000 pcs/carton in total
4.24 carton size 38x28x37cm
4.25 12carton/tray
4.26 tray size 85x77x74cm
E
H
label about order info
G
F
E
5.MSL rating and Notice
LevelFloor Life(out of bag) at Factory Ambient ≤ 30°C/60% RH or as Stated
2 1 year
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
5.1 The products mustn't be washed
5.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And avoid such
places where there are large temperature changes. Please store the products at the following conditions:
Temperature: -10 to + 40 C Humidity: 15 to 85% R.H.
5.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a
sealed and an unopened package. Please use the products within six months after deliveried.
If you store the products for a long time (more than six months), use carefully because the
products may be degraded in the solderability and/or rusty.Please confirm solderability and
characteristics for the products regularly.
5.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be degraded in the solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the characteristics may be reduced at quality, and/or be degraded in the solderability due to storage under
the poor condition.
(3) Please do not drop the products to avoid cracking of ceramic element.
D
C
B
A07/11/29
A
REV.
Date:
Drawn by:
Checked by:
Approved by:
Date
赵 峥
Drawn
Note
BESTAR ELECTRONICS INDUSTRY CO.,LTD
07/11/29
赵 峥
陶红仲
张秀琴
www.be-star.com wu@be-star.com
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
A
Page:5 of 6
Page 7
6
5
4
3
2
1
65
BSP1313-05H2.5-02 LF
H
6. History change record
4321
H
version
G
No.
A
F
E
Before
Change Items
After
Date
07/11/29
ApprovedDrawn
G
赵 峥张秀琴
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
A
REV.
A07/11/29
Date:
Drawn by:
赵 峥
Drawn Date
Note
BESTAR ELECTRONICS INDUSTRY CO.,LTD
Checked by:
Approved by:
www.be-star.com wu@be-star.com
07/11/29
赵 峥
陶红仲
张秀琴
BSP1313-05H2.5-02 LF
Piezo Sounder
DRG NO: BS/TEP01.534A
D
C
B
A
Page:6 of 6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.