For conform to the European Union Directive on the Restriction of Hazardous Substances(RoHS), this type of
productions forbid use all the hazardous substances as follow:
Lead
Cadmium
Mercury
Hexavalent chromium
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
5. a)Sound Output at 5.2KHz,10cm Min.70dB(after reflow no changes)
E
6. Resonant Frequency 5.2 0.5KHz
E
7. Operating Temperature -20...+70 C
8. Storage Temperature -40...+85 C
9. Weight 1.0g 25%
D
a)Value applying at rated voltage.(5Vp-p square wave,1/2duty)
D
1.3 Test method:
and shall not be used in whole or in part without its written content
1.31.Recommended Circuit
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
the following are examples of externally driven circuits.
1) Unstable multi-vibrator using Tr.
2) Circuits using inverters or NAND gates.
1)
20kΩ510Ω
0.01μF
0.01μ F
+V
1kΩ
510Ω20kΩ
1kΩ
2)
1MΩ
Input
0.001μF
120kΩ
1kΩ
1kΩ
1.32.Standard test Fixture
No reaction in space with in 400mm in all direction
+V
400mm
Sounder
100mm
C
B
Date:
Drawn by:
A
Rev.
07/08/16B
Date
杨红烨
Drawn
Note
Checked by:
Approved by:
www.be-star.com wu@be-star.com
56
07/08/16
杨红烨
张秀琴
程久生
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
Page:1 of 6
1234
B
A
Page 3
465321
BSP1010-05H03 LF
HH
1.4 Frequency Response(Square wave 5Vp-p 10cm)
G
F
G
F
EE
2. Dimension
Tolerance: 0.3 Unit:mm
10.0
2.0
3.0
2.0
1.9
10.4
6.0
2.0
Standard Land Pattern Dimensions
Year
XX.XX
Week
05H03 LF
BSP1010-
Bestar
Sound emission
D
0.6
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
2.0
C
10.0
BB
D
C
Date:
Drawn by:
07/08/16
B
A
REV.
Date
65
杨红烨
Drawn
Note
Checked by:
Approved by:
www.be-star.com wu@be-star.com
4
07/08/16
杨红烨
张秀琴
程久生
321
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
A
Page:2 of 6
Page 4
64
5
32
1
H
BSP1010-05H03 LF
H
3. Reliability test
3.1 High temperature test
Temperature +85 C
Duration 96hrs
G
F
E
3.2 Low temperature test
Temperature -40 C
Duration 96hrs
3.3 Temperature cycle test
+85 C
+20 C
-40 C
30min
+20 C
15min30min15min
Cycles 5
3.4 Humidity test
Temperature +40 C
Relative Humidity 90~95%
Duration 240hrs
3.5 Life test in normal temperature
Power supply Rated voltage
Duration 1000 hrs
all these tests above should be measured after leaving normal temperature for 2hrs.
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
A
3.6Vibration Test
Vibration Frequency 10~55Hz
Amplitude 1.52mm
Duration 2hrs each of 3 axis
3.7 Drop test
Height 100cm
(to 10mm thickness woodenboard)
Direction 3
3.8 Solderability
Temperature 2555 C
Duration 30.5sec
3.9 Solder Heat Resistance
Temperature 25010 C
Duration 30sec
Notice: All specification must be satisfied in this condition.
SPL: allowable deviation 5dB of the initial value after testing
B07/08/16
REV.
Date
杨红烨
Drawn
Date:
Drawn by:
Checked by:
NoteApproved by:
456
07/08/16
杨红烨
张秀琴
程久生
www.be-star.com wu@be-star.com
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
D
C
B
A
Page:3 of 6
123
Page 5
6
BSP1010-05H03 LF
H
G
3.10 Recommended Temp. Profile for Reflow Oven
300
250
200
150
100
Temperature [℃]
50
54
Temperature profile for a lead-free reflow process
min.190℃
ramp up to
150℃
min.3k/s
min.300s
T(solid)min.217℃
min.110s
max.260℃
min.40s
max.90s
max.255℃
ramp down
from T(solid)
min.6k/s
3
21
H
G
0
F
4. Tape on Reel Packing
50
0
100
time [s]
250
300350150200
400
F
4.1 packing drawing
Dimensions of carrier tape
4.0 0.1
+0.1
2.0 0.1
1.5
-0.0
E
A
16 0.1
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
ar
010 03 LF
X.XX
Bestar
BSP101005H03 LF
XX.XX
Min. 1.5
Bestar
BSP101005H03 LF
XX.XX
1.75 0.1
B
11.5±0.1
24 0.2
B
The cover film peel strength force 0.1-0.7N
The cover film peel speed 300mm/min.
Bestar
BSP1010
05H03 LF
XX.XX
12.5 0.1
A-A
12.5 0.1
B-B
0.3 0.05
max5
E
D
°
C
33.5 Max
B
B07/08/16
A
REV.
Dimensions of reel
13 0.2
100 0.5
25.5
杨红烨
Date
Drawn
6
5
330 Max
Diameter
Trailer160-200
Note
Components
Cover Film
240~280
Empty
400-560 Leader
Date:
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
07/08/16
杨红烨
张秀琴
程久生
43
2.7 0.1
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
21
C
B
Unit:mm
A
Page:4 of 6
Page 6
6543
BSP1010-05H03 LF
H
4.2 packing quantity
4.21 1000pcs/reel
4.22 5reel/carton
G
4.23 5000 pcs/carton in total
4.24 carton size 38x28x37cm
21
H
G
F
F
5.Notice
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
5.1 The products mustn't be washed
5.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable.
And avoid such
places where there are large temperature changes. Please store the products at the
following conditions:
Temperature: -10 to + 40°C Humidity: 15 to 85% R.H.
5.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions
of a sealed and an unopened package. Please use the products within six months after
deliveried.
If you store the products for a long time (more than six months), use carefully because
the products may be degraded in the solderability and/or rusty.Please confirm
solderability and characteristics for the products regularly.
5.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases,
Organic gas, Sulfides and so on), because the characteristics may be reduced at
quality, and/or be degraded in the solderability due to the storage in a chemical
atmosphere.
(2) Please use the products immediately after the package is opened, because the
characteristics may be reduced at quality, and/or be degraded in the solderability due
to storage under the poor condition.
(3) Please do not drop the products to avoid cracking of ceramic element.
E
D
C
B
B07/08/16
A
REV.
杨红烨
Date
Drawn
65
Note
Date:
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
07/08/16
杨红烨
张秀琴
程久生
43
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
21
B
A
Page:5 of 6
Page 7
6543
BSP1010-05H03 LF
H
6. History change record
2
1
H
version
G
No.
A04/01/31
B07/08/16
F
E
D
BeforeAfter
Change Items
RoHS
Date
Drawn
王善梅
杨红烨程久生
Approved
查红红
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
A
REV.
B07/08/16
Date
杨红烨
Drawn
54
Note
Date:
Drawn by:
Checked by:
Approved by:
07/08/16
杨红烨
张秀琴
程久生
www.be-star.com wu@be-star.com
3
BSP1010-05H03 LF
Piezo Sounder
DRG NO: BS/TEP01.244B
26
C
B
A
Page:6 of 6
1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.