No.199 HuangHe West Road.New district,ChangZhou,JiangSu Province,P.R.China
Tel: +86 519 88222567 Fax: +86 519 88222551
E-mail:wu@be-star.com http://www.be-star.com
Page 2
6453
BMS1609F-11C-08H03P LF
H
1.Test Climatic Condition
1.1 Ambient Temperature :15°C~35°C,Preferably at 20°C
1.2 Relative Humidity:25% to 75%
1.3 Air Pressure:86kPa~106kPa
12
G
2.Description
G
2.1 Acoustic component Performance Specification
2.2 The present document specifies performance
requirements for the acoustic characteristics of speaker
3.Characteristics
C:\Documents and Settings\syt\桌面\未命名.JPG
F
3.1 Electrical and Mechanical Characteristics
No. Item Specification
1. Dimension 16 x 9 x 3.0(mm)
2. DC Resistance 7.8Ω±10%
E
3. AC Impedance 8Ω±15%(at 2KHz/1Vrms)
4. Rated Power 0.7W(2.37Vrms/ in 1cc box)
5. Maximum Power 1.0W(2.83Vrms/ in 1cc box)
6. Resonance Frequency 500Hz ± 20% (in free air)
D
7. Resonance Frequency 850Hz ± 20% (in 1cc box)
8. Frequency Response F0~20KHz
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
9. S.P.L 80.5±3dB/0.1m/0.1W at 2.0KHz average
10. THD ≤20% at 800-1KHz/0.1W;≤5% at 1K-8KHz(0.1W)
11. Buzzes & Rattles Must be normal at sine wave 0.89Vrms (in free air)
C
/2.37Vrms(in 1cc box) from 300~10KHz
12. Polarity Positive voltage to (+),Diaphragm moves forward
Confidential
C
13. Operating Temperature -20~+ 70°C
14. Storage Temperature -40~+ 85°C
15. Weight ~1.0g±0.3g
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:02 of 11
B
A
Page 3
6453
BMS1609F-11C-08H03P LF
H
1.Test Climatic Condition
1.1 Ambient Temperature :15°C~35°C,Preferably at 20°C
1.2 Relative Humidity:25% to 75%
1.3 Air Pressure:86kPa~106kPa
12
G
2.Description
G
2.1 Acoustic component Performance Specification
2.2 The present document specifies performance
requirements for the acoustic characteristics of speaker
3.Characteristics
C:\Documents and Settings\syt\桌面\未命名.JPG
F
3.1 Electrical and Mechanical Characteristics
No. Item Specification
1. Dimension 16 x 9 x 3.0(mm)
2. DC Resistance 7.8Ω±10%
E
3. AC Impedance 8Ω±15%(at 2KHz/1Vrms)
4. Rated Power 0.7W(2.37Vrms/ in 1cc box)
5. Maximum Power 1.0W(2.83Vrms/ in 1cc box)
6. Resonance Frequency 500Hz ± 20% (in free air)
D
7. Resonance Frequency 850Hz ± 20% (in 1cc box)
8. Frequency Response F0~20KHz
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
9. S.P.L 80.5±3dB/0.1m/0.1W at 2.0KHz average
10. THD ≤20% at 800-1KHz/0.1W;≤5% at 1K-8KHz(0.1W)
11. Buzzes & Rattles Must be normal at sine wave 0.89Vrms (in free air)
C
/2.37Vrms(in 1cc box) from 300~10KHz
12. Polarity Positive voltage to (+),Diaphragm moves forward
Confidential
C
13. Operating Temperature -20~+ 70°C
14. Storage Temperature -40~+ 85°C
15. Weight ~1.0g±0.3g
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:02 of 11
B
A
Page 4
6453
BMS1609F-11C-08H03P LF
H
4. Test Setup
4.1 Speaker Measurement Circuit
12
G
Power Amplifier
G
10cm
Mic
F
0.1W(0.89Vrms)
Speaker
Baffle
Audio
F
Analyser
E
Anechoic chamber
E
4.2 Baffle Drawing
unit:cm
tolerance:±2
D
D
4.3 Test Method
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
The speaker shall be mounted in a
baffle of the dimensions 80X100cm show
figure 4.2,
The measuring free-field microphone
C
Confidential
shall be placed 10cm from DUT,on axis.
The test voltage is 0.1W and swept
sine-wave range is 200Hz~20KHz with a
C
R80 of test sequence
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45
2012/07/28
王文邦
王 平
李红元
3
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:03 of 11
B
A
Page 5
6453
BMS1609F-11C-08H03P LF
H
4.4 Frequency Response Curve (only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
100
2
1
G
G
90
80
F
F
70
Sound Pressure Level (dB)
E
60
100
1K2K
5K
10K20K
E
Frequency (Hz)
4.4.1 Sensitivity
SPL is expressed in dB rel 20μPa,computed according to IEC 268-5.
D
Measurement set up according chapter 4.1 and parameters according
D
chapter 4.4.
This test is performed for 100% of products in the production line.
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:04 of 11
B
A
Page 6
6453
BMS1609F-11C-08H03P LF
H
4.5 Total Harmonic Distortion(only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
20
12
G
G
15
10
F
THD (%)
F
5
E
0
100
E
1K2K5K10K20K
Frequency (Hz)
4.5.1 THD
THD is measured according test set up in chapter 4.1 and parameters
D
according chapter 4.5
D
This test is performed for 100% of products in production line
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45
2012/07/28
王文邦
王 平
李红元
3
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:05 of 11
B
A
Page 7
6453
BMS1609F-11C-08H03P LF
H
4.6 F0 Curve (only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
16
2
1
G
G
12
8
F
(ohm)
F
4
E
0
100
1K2K
5K
10K20K
E
Frequency (Hz)
4.6.1 Resonance Frequency
Resonance frequency is measured according test set up in chapter 4.1
D
and parameters according chapter 4.6
D
This test is performed for 100% of products in the production line
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:06 of 11
B
A
Page 8
6453
BMS1609F-11C-08H03P LF
H
4.7 R&B Curve(only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
4.0
2
1
G
G
3.0
2.0
F
(%)
F
1.0
E
0
100
E
1K2K5K10K20K
Frequency (Hz)
4.7.1 R&B
R&B is measured according test set up in chapter 4.1 and parameters
D
according chapter 4.7
D
This test is performed for 100% of products in production line
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:07 of 11
B
A
Page 9
6453
BMS1609F-11C-08H03P LF
H
5. Drawing
2
1
G
F
E
D
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
4-R2
C
Confidential
B
unit:mm
tolerance:±0.2
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45
2012/07/28
王文邦
王 平
李红元
3
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:08 of 11
B
A
Page 10
6
BMS1609F-11C-08H03P LF
H
6. Reliability Test
6.1 Load Test
Power (Nom) 0.7W(sine wave/in 1cc box)Duration 96hrs
G
F
6.2 High Temperature Test
Temperature +85±3°CDuration 96hrs
6.3 Low Temperature Test
Temperature -40±3°CDuration 96hrs
6.4 Damp Heat
Temperature 40±3°CRelative Humidity 90%-95%RHDuration 96hrs
6.5 Temperature Cycle Test
Cycles 10
45
3
2
1
G
F
E
T(°C)
transition time:20-30s
E
+85
+25
-40
D
30
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
3030
1 cycles
t (min)
D
6.6 Drop Test
C
Height 1.0m
Drop face thick board (20mm)
Times 10 (three times in
Confidential
C
each durection )
Notice:
1.Immediately after reliability test,the samples shall be stored under climatic conditions
such as normally exist in ordinary rooms or laboratories.Unless otherwise noted,the
B
recovery period shall be 4hrs at least before performance testing.
2. After reliability test ,all samples must be meet the requirements specified
B
3.Sensitivity difference at 2.0KHz shall be within ±3dB from initial value after test.
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
A
Page:09 of 11
Page 11
6
BMS1609F-11C-08H03P LF
H
7. Packing
45
3
12
G
F
E
D
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
C
Confidential
P/O NO.
MODEL
O’TY
N.W.
G.W.
B
A
A
Rev.
2012/07/28
Date
王文邦
Drawn
SIZE
6
46×28×24cm
Note
PCS
Date:
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
Remark:
150 pcs per tray
10 trays for unit
1500 pcs per carton
2 carton per box
Total 3000pcs per box
Size: 35×27×30(cm)
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
B
A
Page:10 of 11
Page 12
6453
BMS1609F-11C-08H03P LF
H
8. History Change Record
12
version
No.
A
G
F
E
DrawnApproved
王文邦
李红元
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Acoustics Co., Ltd.
C
D
C
Confidential
B
Date:
A
A
Rev.
2012/07/28
Date
6
王文邦
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
453
2012/07/28
王文邦
王 平
李红元
BMS1609F-11C-08H03P LF
Speaker
DRG NO: BS/TES01.1145A
21
Page:11 of 11
B
A
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.