Page 1
APPROVAL SHEET
FOR SMARTPHONE SPEAKER
Customer
Date
Page
Table of Contents:
1.Test Climatic Condition
TOTAL PAGE
01 of 13
13
Model Name
Product No.Customer P/N
Issue No.
Issue Date
www.be-star.com
RoHS
BMS1511F-11C-08H3.5W018 LF
139704
BS/TES01.1148A
2.Description
3.Characteristics
4.Test Setup
5.Drawing
6.Reliability Test
7.Packing
8.History Change Record
Confidential
Drawn by
Checked by
Approved by
Customer approved
BESTAR ELECTRONICS INDUSTRY CO.,LTD
No.199 HuangHe West Road.New district,ChangZhou,JiangSu Province,P.R.China
Tel: +86 519 88222567 Fax: +86 519 88222551
E-mail:wu@be-star.com http://www.be-star.com
Page 2
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
12
G
F
E
D
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:02 of 13
B
A
Page 3
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
1.Test Climatic Condition
1.1 Ambient Temperature :15°C~35°C,Preferably at
20°C
1.2 Relative Humidity:25% to 75%
1.3 Air Pressure:86kPa~106kPa
12
G
G
2.Description
2.1 Acoustic component Performance Specification
2.2 The present document specifies performance
F
requirements for the acoustic characteristics of speaker
F
3.Characteristics
3.1 Electrical and Mechanical Characteristics
E
No. Item Specification
1. Dimension 15 x11 x 3.5(mm)
2. AC Impedance 8Ω±15%(at 2KHz/1Vrms)
D
3. Rated Input Power 0.5W(2.0Vrms/in 1cc box)
4. Maximum Input Power 1.0W(2.83Vrms/in 1cc box)
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
5. Resonance Frequency 500Hz ±20%
6. Response Frequency 750Hz ±20%
7. Frequency Response F0~20KHz
C
8. S.P.L 82±3dB/0.1m/0.1W at 2~5KHz average
9. THD ≤5% (at 1.0~10KHz/0.1W)
Confidential
C
10. Buzzes & Rattles Must be normal at sine wave 0.89Vrms (in free air)
/2.0Vrms(in 1.0cc box) from 300~10KHz
11. Polarity Positive voltage to (+),Diaphragm moves forward
B
12. Operating Temperature -20~+ 70°C
B
13. Storage Temperature -40~+ 85°C
14. Weight ~1.7g±0.3g
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:03 of 13
A
Page 4
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
4. Test Setup
4.1 Speaker Measurement Circuit
12
Power Amplifier
G
10cm
G
Mic
0.1W(0.89Vrms)
F
Speaker
Baffle
Audio
F
Analyser
Anechoic chamber
E
4.2 Baffle Drawing
E
unit:cm
tolerance:±2
80
D
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
100
45
4.3 Test Method
The speaker shall be mounted in a
baffle of the dimensions 80X100cm show
Confidential
figure 4.2,
The measuring free-field microphone
C
shall be placed 10cm from DUT,on axis.
60
The test voltage is 1mW and swept
sine-wave range is 200Hz~20KHz with a
R80 of test sequence
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:04 of 13
B
A
Page 5
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
4.4 Frequency Response Curve (only for reference)
A: Frequency Response Magn 0 dB re 20.00 μPa/V 1/12Oct
12
G
G
90
100
F
80
F
70
Sound Pressure Level (dB)
E
E
60
100
1K 2K
5K 10K 20K
Frequency (Hz)
4.4.1 Sensitivity
D
SPL is expressed in dB rel 20 μPa,computed according to IEC 268-5.
Measurement set up according chapter 4.1 and parameters according
and shall not be used in whole or in part without its written content
chapter 4.4.
This test is performed for 100% of products in the production line.
D
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:05 of 13
B
A
Page 6
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
4.5 Total Harmonic Distortion (only for reference)
A: Frequency Response Magn 0 dB re 20.00 μPa/V 1/12Oct
60
12
G
G
45
30
THD (%)
F
F
15
0
E
100
1K 2K
5K
10K 20K
E
Frequency (Hz)
4.5.1 THD
THD is measured according test set up in chapter 4.1 and parameters
D
according chapter 4.5
This test is performed for 100% of products in production line
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:06 of 13
B
A
Page 7
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
4.6 F0 Curve (only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
16
12
G
G
12
8
F
(ohm)
F
4
E
0
100
1K 2K 5K 10K 20K
E
Frequency (Hz)
D
and shall not be used in whole or in part without its written content
4.6.1 Resonance Frequency
D
Resonance frequency is measured according test set up in chapter 4.1
and parameters according chapter 4.6
This test is performed for 100% of products in the production line
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:07 of 13
B
A
Page 8
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
4.7 R&B Curve (only for reference)
A: Frequency Response Magn 0 dB re 20.00μPa/V 1/12Oct
4.0
12
G
G
3.0
2.0
(%)
F
F
1.0
0
E
100
1K 2K
5K
10K 20K
E
Frequency (Hz)
4.7.1 R&B
D
and shall not be used in whole or in part without its written content
R&B is measured according test set up in chapter 4.1 and parameters
according chapter 4.7
This test is performed for 100% of products in production line
D
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:08 of 13
B
A
Page 9
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
5. Drawing
12
15.0±0.2
G
1
7.0
8.75
3.5±0.2
(unit height)
G
11.0±0.2
18.0
F
F
15±0.2
E
E
2.7
3.5±0.2
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
D
C
Confidential
Diaphragm
B
unit:mm
tolerance:±0.2
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:09 of 13
B
A
Page 10
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
5.1 Permited Force to Speaker
12
Diaphragm
G
F
F3:on back
of yoke
G
F
Max Permited Comperssion Force
E
D
No
1
2
3
From
F1
F2
F3
To
F3
F1
Max Force
10N
0
10N
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
5
C
4
3
2
1
No
Confidential
6
7
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
Description of the part
1
2
3
Frame
Yoke
Magnet
4
5
6
Coil
Diaphragm
7
BMS1511F-11C-08H3.5W018 LF
DRG NO: BS/TES01.983A
C
Plate
B
Grill
A
Speaker
Page:10 of 13
2 1
Page 11
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
6. Reliability Test
6.1 Load Test
Power (Nom) 0.5W(in Pink noise in 1cc box)
Duration 96hrs
G
F
6.2 High Temperature Test
Temperature +70±3°C
Duration 96hrs
6.3 Low Temperature Test
Temperature -20±3°C
Duration 96hrs
6.4 Damp Heat
Temperature 40±3°C
Relative Humidity 90%-95%RH
Duration 96hrs
6.5 Temperature Cycle Test
Cycles 10
12
G
F
E
E
+70
+25
-40
D
D
t (min)
30
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
6.6 Drop Test
C
Height 1.0m
Drop face thick board (20mm)
Times 10 (three times in
Confidential
30 30
1 cycles
C
each durection )
Notice:
1.Immediately after reliability test,the samples shall be stored under climatic conditions
such as normally exist in ordinary rooms or laboratories.Unless otherwise noted,the
B
recovery period shall be 4hrs at least before performance testing.
2. After reliability test ,all samples must be meet the requirements specified
B
3.Sensitivity difference at 0.8~1.5KHz shall be within ±3dB from initial value after test.
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:11 of 13
A
Page 12
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
7. Packing
12
32.5
G
G
24.5
F
E
30
D
27
35
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
C
Confidential
P/O NO.
MODEL
B
A
A
Rev.
Date
6
Drawn
O’TY
N.W.
G.W.
SIZE
Note
35×27×30cm
PCS
Date:
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
Remark:
150 pcs per carton
20 carton per box
Total 3000pcs per box
Size: 35×27×30(cm)
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
2 1
Page:12 of 13
B
A
Page 13
6 45 3
BMS1511F-11C-08H3.5W018 LF
H
8. History Change Record
12
version
No.
A
G
F
E
Before After
Change Items
Date
2010/06/09
Drawn
Approved
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
D
C
Confidential
B
Date:
A
A
Rev.
Date
6
Drawn
Note
Drawn by:
Checked by:
Approved by:
www.be-star.com wu@be-star.com
45 3
BMS1511F-11C-08H3.5W018 LF
Speaker
DRG NO: BS/TES01.983A
Page:13 of 13
2 1
B
A
Loading...