4 Current Consumption 0.5mA Max.
5 Directional Omnidirectional
6 S/N Ratio more than 58dB
2
1
H
G
F
7 Standard Operating Voltage 2V
E
8 Operating Voltage 1V~10V
E
9 Sensitivity reduction within -3dB at 1.5V
10 Storage Temperature -40°C to +70°C
11 Operating Temperature -30°C to +60°C
D
Frequency Resonse Curve
★
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
D
CC
B
B
Frequency(Hz)
C
B
A
A
Rev.
王焕焕
徐金国
王丽娟
DrawnDate
Note
Date:
Drawn by:
Checked by:
Approved by:
王焕焕
徐 波
王 平
www.be-star.com wu@be-star.com
BCM3015OLBC-42
Microphone
DRG NO:
BS/TEM01.093C
2
1
A
Page:2 of 6
Page 3
Acoustics & Sensor
H
BCM3015OLBC-42
★Angular Response
G
F
2. Drawing
2
1
H
G
F
filter
E
Terminal 1
E
Red
Black
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
3. Measurement Circuit:
and shall not be used in whole or in part without its written content
FET impedance
Terminal 1
Converter
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C1
ECM unit
B
10pFC233pF
Terminal2
UL10064 AWG36#
C:1 F
Output
Power Supply 2.0V
RL=2.2K
Earth
D
C
B
Terminal 2
Shield Case
C
B
A
A
Rev.
王焕焕
徐金国
王丽娟
DrawnDate
Note
Date:
Drawn by:
Checked by:
Approved by:
王焕焕
徐 波
王 平
www.be-star.com wu@be-star.com
BCM3015OLBC-42
Microphone
DRG NO:
BS/TEM01.093C
2
A
Page:3 of 6
1
Page 4
Acoustics & Sensor
2
H
1
H
BCM3015OLBC-42
4.Reliability Test
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
B
3.1 High temp.life test
Temperature +70C
Duration 200hrs
3.2 Low temp.life test
Temperature -25C
Duration 200hrs
3.3 Temperature cycle test
Cycles 5
3.4 Humidity Test
Temperature +40C
Relative Humidity 90~95%
Duration 200hrs
Tests above should be measured after leaving normal temperature for 6hrs.
3.5 Vibration Test
Vibration Frequency 10~55Hz
Amplitude 1.52mm/min
Direction 3(x.y&z)
Duration 2hrs each cycle(total 6 hrs)
3.6 Drop test
Height 1m
(Dropped to 20mm thick hardwood board without packing.)
Direction 3
3.7 Soldering Heat Shock .
Temperature 260C±5
Duration 3±1 sec
3.8 Terminal Mechanical Strength
Strength 1kg
Duration 1 min
3.9 Storage Temperature: -20C~+60 C
Notice:
All specifications must be satisfied in this condition.
Sensitivity :Allowable deviation within 3dB from initial sensitivity.
G
F
E
D
CC
B
C
B
A
A
Rev.
王焕焕
徐金国
王丽娟
DrawnDate
Note
Date:
Drawn by:
Checked by:
Approved by:
王焕焕
徐 波
王 平
www.be-star.com wu@be-star.com
BCM3015OLBC-42
Microphone
DRG NO:BS/TEM01.093C
2
A
Page:4 of 6
1
Page 5
Acoustics & Sensor
H
BCM3015OLBC-42
G
F
2
1
H
G
F
E
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
10 trays for unit, 10 units per carton
E
D
C
B
Total 10000pcs per carton
Size: 24×24×29(cm)
C
B
A
A
Rev.
王焕焕
徐金国
王丽娟
DrawnDate
Note
Date:
Drawn by:
Checked by:
Approved by:
王焕焕
徐 波
王 平
BCM3015OLBC-42
Microphone
DRG NO:
BS/TEM01.093C
2
A
Page:5 of 6
1
Page 6
Acoustics & Sensor
BCM3015OLBC-42
H
6. History change record
version
No.
G
F
A
B
C
Before
Change Items
After
add down-lead
change the wire
Date
02.10.07
09.06.08
09.07.07
Drawn
王丽娟
徐金国
王焕焕
2
1
H
Approved
郭 敏
陶红仲
王 平
G
F
EE
D
and shall not be used in whole or in part without its written content
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
C
B
D
C
B
C
B
A
A
Rev.
Date
王焕焕
徐金国
王丽娟
Drawn
Note
Date:
Drawn by:
Checked by:
Approved by:
王焕焕
徐 波
王 平
www.be-star.com wu@be-star.com
BCM3015OLBC-42
Microphone
DRG NO:BS/TEM01.093C
2
A
Page:6 of 6
1
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.