Best WTT32I30SB Specsheet
MODELS WTT32I30SB,
8-7/16"
SPECIFICATION SHEET
WTT32
I36SB, WTT32I42SB
RANGE HOODS
Traditional Italian design wall mount chimney
hood. Design includes modern features and
high performance necessary in today’s upscale
residential kitchens.
FEATURES
Wall mount
•
Finish: 430 Stainless Steel #4 Brushed
•
Widths: 30”, 36”, 42”
•
Depth: 22”
•
Duct connector with back draft damper - 8” round
•
Three-setting cook top lighting. Uses two (2), 50W,
•
GU10 halogen lamps. Three (3) lamps on 42” wide
hood. Bulbs included.
Quick release stainless steel / aluminum mesh filters are
•
dishwasher safe.
4-speed electronic push button control with blue backlit
•
selection indicators.
Powerful, centrifugal blower with high efficiency motor
•
produces 600 CFM
Quiet operation
•
Heat Sentry ™ - automatically turns blower to high
•
speed when excess cooking heat is detected.
Delay timer control automatically shuts off range hood
•
after 5 minutes.
Special control indicates when it’s time to clean the
•
filters.
SPECIFICATIONS
MODEL NO. VOLTS AMPS CFM / SONES CFM / SONES DUCT
I30SB 120 4.5 600 / 9.5 200 / 1.4 8" round
WTT32
I36SB 120 4.5 600 / 9.5 200 / 1.4 8” round
WTT32
I42SB 120 5.0 600 / 9.5 200 / 1.4 8” round
WTT32
(High Speed) (Low Speed)
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
OPTIONS
Non-ducted kit - ANKWTT320 (for 30” wide hood),
•
ANKWTT326 (for 36” & 42” wide hoods)
- Charcoal filters included
Flue extension for 10-foot ceilings - AEWTT32SB
•
Make-up Air damper - MD6T (6” duct), MD8T (8” duct)
•
- Transformer included
Non-ducted Replacement Filters - AFCWTT32 (for 30”
•
hood), AFCWTT326 (for 36” & 42” hoods)
- Includes (2) filters
10-1/2"
15-3/8"
1"
30", 36", 42"
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in a state-ofthe-art test laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory measurements.
22"
1-9/16"
15-3/8"
12-3/8"
min. 27-3/8" max. 42-5/16"
min. non-duct 32"
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
21K 99045056A
WTT32
Ceiling
Height
Desired Hood Distance (Above 36" High Cooktop)
I30SB, WTT32I36SB, WTT32I42SB WIRING
HOOD
CENTER LINE OF
DUCT AND HOOD
CENTERLINE
24”
MAX.
3
4
/
4
”
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 9½” DIMENSION)
NOTE: A clock outlet can be used to
minimize clearance related issues
with the range hood plug.
120 VOLT 60 HZ
GROUNDED WALL OUTLET -
WTT32I30SB, WTT32I36SB, WTT32I42SB MOUNTING
C
L
4 3/4 ”
4 3/4 ”
HOOD
24" 25"26" 27" 28"29" 30"
Upper Mounting Screws Location (Distance above 36" High Cooktop)
8 Feet 37-1/8" 38-1/8" 39-1/8" 40-1/8"41-1/8"*42-1/8"*43-1/8"
9 Feet
9 Feet
with
AEWTT32SB
10 Feet
with
AEWTT32SB
**37-1/8" **38-1/8" **39-1/8"
37-1/8" 38-1/8" 39-1/8" 40-1/8"41-1/8"42-1/8" 43-1/8"
A
SEE
CHART
BELOW
11 3/4 ”
STRUCTURAL
FRAMING
6 3/8 ”
STRUCTURAL
FRAMING
4mm x 38mm
SCREWS
HERE
6 3/8 ”
36” HIGH COOKTOP
(Dimension “A”)
43-1/8"
* Not applicable for non-duct installation.
** For non-duct installation, use upper flue from AEWTT32SB and lower flue from standard hood.
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
Loading...