COLONNE
WPP9IQ SERIES
RANGE HOOD
SPECIFICATION SHEET
The traditional chimney hood design from Italy has
stood the test of time. The Colonne builds on this
legacy with a new powerful design that can handle the
needs of pro-style cooking.
FEATURES
Italian design
•
Wall mount
•
Finishes: 430 Stainless Steel, #4 Brushed
•
Widths: 36”, 42”, 48”, 54”
•
Ducted/non-ducted telescopic flue accommodates 8’ to 9’
•
ceilings (Purchase non-duct recirculation kit separately.)
8” round duct connector/backdraft damper on single blowers
•
(10” round on dual blowers)
2-level halogen lamps, T4, G9, 25 Watt (3 lamps on 36” & 42”
•
widths, 4 lamps on 48” & 54” widths)
3-speed plus boost, electronic pushbutton with display
•
Quiet iQ6 blower system with high-efficiency BLDC motor
•
Heat Sentry
•
excess cooking heat is detected
Delay timer control automatically shuts off range hood after 10
•
minutes
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe, mesh lined, Hi-Flow
•
For indoor use only
•
OPTIONS
Non-ducted recirculation kit (Model ANKWPP9 - for single
•
blowers only)
Replacement charcoal filters available (Model AFCROUND2 -
•
for single blowers only)
Flue extension for 10-ft. to 11-ft. ceilings (ducted Model AEWPP9SB)
•
(non-ducted Model AEWPP9SBN)
TM
- automatically turns blower to high speed when
TM
baffle filters
iQ6 - 600 CFM Blower System
providing:
Best in class quiet operation.
•
Up to 30% faster smoke and odor
•
removal than comparable models.
Up to 22x more energy efficient than
•
comparable models.
Guaranteed Performance System (GPS) technology
•
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
Using a duct reducer with this hood may prevent the product
•
from calibrating.
16-1/2
27-1/2
12-1/2
36, 42, 48, 54
24
min. 28-1/4 - max. 44
SPECIFICATIONS
BLOWER VOLTS AMPS CFM / SONES CFM / SONES CFM / SONES CFM / SONES DUCT
(Boost) (High Speed) (Med. Speed) (Low Speed)
SINGLE 120 4.5 600 / 8.0 140 / <0.3 8" round
DUAL 120 8.5 1100 / 10.5 890 / 7.5 640 / 4.0 295 / <0.3 10” round
This product was tested by Broan-NuTone for airflow performance using the ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
31M 99045192A
WPP9IQ SERIES WIRING
COVER
CEILING
HEIGHT
8 FEET
9 FEET
10 FEET
(see note b.)
11 FEET
(see notes
a. & b.)
WPP9
MOUNTING
DUCT
METHOD
DUCTED
NON-DUCTED
DUCTED
NON-DUCTED
DUCTED
NON-DUCTED
DUCTED
NON-DUCTED
FRAMING
BEHIND WOOD
CROSS SUPPORT
2-3/16”
CENTERLINE
IQ SERIES
3-1/2”
3-1/2”
WOOD CROSS
SUPPORT BEHIND
DRYWALL
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note below)
24” 25” 26”
MOUNTING BRACKET CENTER HOLE LOCATION ABOVE 36” HIGH COOK TOP
44¼” 45¼”
44¼” 45¼” 46¼” 47¼” 48¼” 49¼”
44¼” 45¼” 46¼” 47¼” 48¼” 49¼” 50¼” 51¼” 52¼” 53¼”
44¼” 45¼” 46¼” 47¼” 48¼” 49¼” 50¼” 51¼” 52¼” 53¼”
27”
46¼” 47¼”
28” 29” 30”
48¼” 49¼”
50¼” 51¼”
50¼”* 51¼”* 52¼”* 53¼” 54¼” 55¼” 56¼”
50¼” 51¼” 52¼” 53¼” 54¼” 55¼” 56¼”
31”
32” 33” 34”
52¼” 53¼”
52¼” 53¼” 54¼” 55¼” 56¼”
52¼” 53¼” 54¼” 55¼” 56¼”
DRYWALL
54¼” 55¼”
35”
36”
56¼”
* Possible installation height - however, Non-Duct Filter Slots will be exposed on WPP9IQ36SB
& WPP9IQ42SB.
a. Minimum hood distance above cook top must not be less than 24”. A maximun of 30” above
cook top is highly recommended for best capture of cooking impurities. Distances over 30” are
at the installer and user’s discretion; and if ceiling height and flue length permit.
b. Requires optional 10-ft. to 11-ft. flue extension, ducted model AEWPP9SB or non-ducted model
AEWPP9SBN.