Best WPD39M42SB Specifications

EMPEROR

WPD39M SERIES RANGE HOOD

SPECIFICATION SHEET

HB0160

Especially designed to be installed outdoors in a covered patio or lanai area. For use over residential commercial-style cooking surfaces or gas and electric grills. This unit is not for use with a charcoal grill. A complete installation requires several optional components. Refer to page 2 when planning your installation.

FEATURES

Professional outdoor design.

•

30-inch depth handles heat and size of large outdoor grills

•

(optional 3” wall extension to increase depth to 33”).

Brushed corrosion resistant 304 Stainless Steel.

•

Four widths: 36, 42, 48, and 60 inches.

•

Bright halogen lighting (2 x 50 watt GU10 for 36-in. & 42-in.

•

hoods, 3 x 50 watt GU10 for 48-in. & 60-in. hoods) (bulbs included).

Variable-speed rotary control with separate ON/OFF - for

•

last setting memory - tested to assure operation in corrosive environments.

304 Stainless Steel baffle filters - easily accessible and

•

dishwasher-safe.

Removable grease tray.

•

Grease rail and tray feature non-stick coating for ease of

•

cleaning.

Designed for use with interior blower Model P12 (1200 CFM),

•

in-line blower Model ILB11, or exterior blower Models EB12 or EB15. (All blowers - purchased separately.)

Heat SentryTM detects excessive heat and adjusts blower

•

speed automatically to prevent damaging effects of high heat.

UL and cUL listed for use in damp locations when properly

•

connected to a GFCI circuit.

SPECIFICATIONS

VOLTS HZ AMPS DUCT

120 60 1.4

(without blower)

WALL EXTENSION (optional)

Extends front of hood out an extra 3” (to 33”) - eliminates

•

custom wall bump-outs.

Stainless Steel construction - matches range hood.

•

Attaches to wall and back of range hood.

•

Model AWWPD336SB - 36-in. width Model AWWPD342SB - 42-in. width Model AWWPD348SB - 48-in. width Model AWWPD360SB - 60-in. width

FLUE COVER (optional)

Stainless Steel construction - matches range hood.

•

Attaches to top of range hood shell.

•

Hides ducting and wipes clean easily.

•

Extended depth available for hoods using the 3” wall

•

extension.

Model AEWPD36SB - 6-in. high - for 8-ft. ceiling - standard depth Model AEWPD36SBE - 6-in. high - for 8-ft. ceiling - extended depth

Model AEWPD318SB - 18-in. high - for 9-ft. ceiling - standard depth Model AEWPD318SBE - 18-in. high - for 9-ft. ceiling - extended depth

Model AEWPD330SB - 30-in. high - for 10-ft. ceiling - standard depth Model AEWPD330SBE - 30-in. high - for 10-ft. ceiling - extended depth

Model AEWPD3054SB - collapsed height: 30” - maximum height 54” -

standard depth

Model AEWPD3054SBE - collapsed height: 30” - maximum height 54” -

extended depth

BACKSPLASH (optional)

Model ABWPD for 36”, 42” or 48” wide hood

•

10-in.

ROUND

BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711

BEST Drummondville, QC, Canada www.BestRangeHoods.ca 866-737-7770

REFERENCE QTY. REMARKS Project

RODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Location

Architect

Engineer

Contractor

Submitted by Date

71K 99044975B

WPD39M

SERIES

RANGE HOOD

- WPD39M SERIES RANGE HOOD SYSTEM -

MODEL 437

MODEL 441

10" ROUND WALL CA P

IGH CAPACITY ROOF CAP

ODEL EB12 (1200 CFM) OR EB15 (1500 CFM)

EXTERIOR BLOWER

INCLUDES ROUGH-IN KIT

(SOLD SEPARATELY)

36, 42, 48, 60

HA0120

AEWPD SERIES

TELESCOPIC FLUE COVER

AWWPD SERIES

WALL EXTENSION

AEWPD SERIES

FLUE COVER

MODEL ILB11 (1100 CFM)

IN-LINE BLOWER

INCLUDES TWO 8" X 12" TO

10" ROUND TRANSITIONS AND

ROUGH-IN KIT

(SOLD SEPARATELY)

OPTIONAL DECORATIVE

FLUE AEWPD SERIES

30 - 54

MODEL 418 10" ROUND

ADJUSTABLE ELBOW

MODEL 410 10" ROUND DUCT — 2 FT. SECTIONS

OPTIONAL TELESCOPIC FLUE COVER AEWPD SERIES

WPD39M SERIES RANGE HOOD

36, 42, 48

ABWPD SERIES

BACKSPLASH

MODEL P12 BLOWER

HA0119

HL0247

NOTE: D

IMENSIONS SHOWN ARE IN INCHES

1200 CFM INTERIOR BLOWER

AND ROUGH-IN PLATE

(SOLD SEPARATELY)

ABWPD SERIES BACKSPLASH