WP29M SERIES
RANGE HOOD
SPECIFICATION SHEET
For domestic
cooking only.
Offers modern styling, high performance, and durable construction
to meet the needs of professional-quality residential cooktops.
A complete installation requires several optional components. Refer to
page 2 when planning your installation.
FEATURES
HOOD:
Widths available - 30” to 60” in 6” increments
•
Depths available - 24” (all widths), 27” (36” to 60” widths only)
•
Stainless Steel, 20 gauge, type 304
•
Stainless Steel baffle filters with removable mesh element - easily ac-
•
cessible, dishwasher safe
Variable cooktop lighting (Uses 50W, GU10 halogen lamps. 30”, 36” &
•
42” wide hoods = 4 lamps, 48”, 54” & 60” wide hoods = 6 lamps. Bulbs
included.)
Solid-State, infinite speed blower control with speed memory
•
Exclusive, Heat Sentry™ turns blower ON to HIGH speed when ex-
•
cess heat is detected
For indoor use only
•
NON-DUCTED RECIRCULATING KIT:
ANKWP Series (Optional)
Stainless steel, type 304
•
Available for hood widths up to 48”
•
SOFFIT CHIMNEY:
AEWP Series (Optional)
Widths - 30” to 60” in 6” increments
•
Height - 6” or 12” versions
•
Stainless Steel, 22 gauge, type 304
•
Recommended for use when installation location has no soffit
•
DECORATIVE TOP COVER:
ADPWP Series (Optional)
Stainless Steel, 22 gauge, type 304
•
Widths - 30” to 60” in 6” increments
•
BACKSPLASH:
RMP Series (Optional)
Widths - 30” to 60” in 6” increments
•
Stainless steel, 22 gauge, type 430 - protects back wall and wipes
•
clean easily
Two (2) dual position condiment storage shelves
•
SPECIFICATION:
120 VAC, 60 Hz,
•
1.7 Amps (without blower - 30”, 36”, 42” widths)
•
2.5 Amps (without blower - 48”, 54” 60” widths)
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC Canada www.BestRangeHoods.com 866-737-7770
WP29 Series
Hood
RMP Series
Backsplash
(Optional)
AEWP Series
Soffit Chimney
(Optional)
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted By Date
21C 99044048E
-
WP29M SERIES
INTERIOR BLOWERS
RANGE HOOD SYSTEM -
Model 437
(High capacity roof cap)
Model 418
(10” round adjustable elbow)
Model 410
(10” round duct—2 ft. sections)
Model 421
(10” round
In-Line
Damper -
included)
Model 441
(10’’ Round wall cap)
Model 647
(7” Round wall cap)
Model 415
(7” round adjustable elbow)
Model 407
(7” round duct—2 ft. sections)
Model 634 or 644
(roof cap)
OPTIONAL
DECORATIVE FLUE
AEWP SERIES
OPTIONAL
FLAT TOP COVER
ADPWP SERIES
MODEL P12
BLOWER/ROUGH-IN KIT
(1200 cfm interior blower
& rough-in plate)
OPTIONAL
NON-DUCT
RECIRCULATING KIT
ANKWP SERIES
WP29M
SERIES HOOD
(Canopy with
blower controls
& lighting.
Required for all
installations.)
NOTE: We recommend the non-duct kit flue
ANKWP Series be installed with
Model P6 Blower/Rough-in kit, but
the Model P12 can be used.
6”
HIGH
MODEL P6
BLOWER/ROUGH-IN KIT
(600 cfm interior blower &
rough-in plate)
- WP29M SERIES RANGE HOOD SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
In-line and exterior blower rough-in kit
(included with EB6, EB9, EB12, EB15,
ILB3, ILB6, ILB9 and ILB11 blowers.)
Model 418
10” Round
adjustable elbow
(optional)
Model ILB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model EB6 (600 cfm)
or EB9(900 cfm)
exterior blower
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Model 441
(10” Round
wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Round wall cap)
Model 421
(10” Round vert.
in-line damper)
Recommended
for use with
exterior blowers
Model 410
(10” Round duct
—2ft. sections)
Model ILB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model ILB9 (800 cfm)
or ILB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)
WP29M
SERIES HOOD
(Canopy with
blower controls
& lighting.
required for all
installations.)
OPTIONAL
DECORATIVE FLUE
AEWP SERIES
OPTIONAL
FLA T TOP COVER
ADPWP SERIES
(Can be installed in Vertical or Horizontal position.)
- WP29M SERIES RANGE HOOD SYSTEM -
5 1/8"
7"
5 1/8"
7"
10 1/2"
∅
7"
8 7/8"
18 1/2"
18 1/2"
4 1/2"
4 1/2"
1 1/4"
6 1/2"
8 3/4"
8 3/4"
4 1/4"
6 1/2"
∅
7
BLOWER DUCTING POSITION
BLOWER DUCTING POSITION
(Choice of transition will determine the final duct placement.)
MODEL EB6, EB9, EB12, EB15, ILB3, ILB6, ILB9, ILB11 & P12:
Horizontal outlet
back view
5 1/8"
∅
9 5/8"
7"
9 1/16"
Vertical outlet
top view
6 1/2"
8 3/4"
∅
9 5/8"
5 11/16"
MODEL P6:
Horizontal outlet
back view
5 1/8"
∅
Note: The electrical box dimensions are 2.5” x 3”.
7"
7"
10 1/2"
Vertical outlet
top view
6 1/2"
8 3/4"
4 1/4"
∅
7
Loading...