Best WM45I80sb Specification Sheet
intrigue
SPECIFICATION SHEET
WM45
I80SB
RANGE HOOD
INTRIGUE is certainly a statement piece. It also allows
your imagination to participate. You can choose to use
the stainless flue cover as is or ... paint it to match the
surroundings and make the design pop. Sopresa! You
have just changed not only the shape, but the silhouette,
the lines and the image of your kitchen.
FEATURES
Italian design
•
Wall mount
•
Finishes: 430 Stainless Steel, #4 Brushed
•
Width: 80 cm (31-1/2”)
•
Ducted/non-ducted telescopic flue accommodates 8’ to 9’
•
ceilings (Purchase non-duct recirculation kit separately.)
6” round duct connector/backdraft damper
•
2-level, halogen lighting (2 bulbs included. Type T4, G9 base,
•
120 volt, 25 watts max.)
4-speed electronic blower control with LED speed indicator
•
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 460 CFM of exhaust
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
Delay timer control automatically shuts off range hood after
•
10 minutes
Filter clean reminder
•
Dishwasher-safe filter features a quick-release latch
•
For indoor use only
•
OPTIONS
Non-ducted recirculation kit (Model ANKW45)
•
Replacement charcoal filters available (Model AFCWM45)
•
31-1/2"
11"
10-5/8"
11-1/4"
16-9/16"
"
"
3-3/16
18-1/8
" MIN. - 48” MAX.
30
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
MAX. NORM. MAX. NORM.
120 60 3.12 460 210 8.5 2.5 6” round
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
21C 99044881A
HVI-2100 CERTIFIED RATINGS comply with new
testing technologies and procedures prescribed
by the Home Ventilating Institute, for off-the-shelf
products, as they are available to consumers. Product
performance is rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
WM45I80SB WIRING
L
L
C
5 "
1
16
CENTERLINE
OF HOOD
8”
4”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 4” DIMENSION)
32”
WM45
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
CEILING
HEIGHT
EET
8 F
9 FEET
Note : Minimum hood distance above cook top must not be less than 22”. A maximum of 30” above
cook top is highly recommended for best capture of cooking impurities. Distances over 30” are at
the installer and user’s discretion; and if ceiling height and flue length permit.
I80SB MOUNTING
DRYWALL
DUCT
METHOD
TED OR
DUC
NON-DUC
DUCTED OR
NON-DUC
TED
TED
Hood distance between 36” high
cook top & bottom of hood
22” only
24” to 30”
FRAMING BEHIND
WOOD CROSS
SUPPORT
Loading...