Best WM43I80SB Specsheet
fusion
SPECIFICATION SHEET
WM43
I80SB
RANGE HOOD
FUSION truly represents its name. Just as the sky meets
the horizon or the wind pushes a wave, FUSION has a
mirror-like finish meeting brushed stainless. An optional
flue cover gives you a completely different look. This
hood is like nothing you’ve ever seen before. FUSION
is designer-chic. Italian inspired.
FEATURES
Italian design
•
Wall mount
•
Finishes: Stainless Steel, mirror glass
•
Width: 80 cm (31-1/2”)
•
Ducted & non-ducted
•
6” round duct connector/backdraft damper (for use when ducted)
•
Telescopic flue accommodates 8’ to 9’ ceilings (Purchase duct
•
flue kit separately.)
2-level, halogen lighting (2 bulbs included. Type T4, G9 base,
•
120 volt, 25 watts max.)
4-speed electronic blower control with lighted speed indicator
•
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 490 CFM of exhaust
Heat SentryTM - automatically turns blower to high speed when
•
excess cooking heat is detected
Dishwasher-safe filter features a quick-release latch
•
Delay timer control automatically shuts off range hood after 10
•
minutes
Filter clean reminder
•
For indoor use only
•
OPTIONAL
DUCTED
FLUE
18"
DIAMETER
7-3/4"
31-1/2"
9-15/16"
21-1/4"
C
L
3-1/2"
" MIN. - 49" MAX.
39
"
20-7/8
OPTIONS
Ducted flue kit (Model AEWM43SB)
•
Replacement charcoal filters available (Model FILTEREB40)
•
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
MAX. NORM. MAX. NORM.
120 60 3.12 490 220 7. 5 2.0 6” round
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
21D 99044880B
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is
rated at 0.1 in. static pressure, based on
tests conducted in a state-of-the-art test
laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory
measurements.
WM43I80SB WIRING
WM43
WOOD CROSS
SUPPORT – SECURED
TO FRAMING AND
LOCATED BEHIND
I80SB MOUNTING
DRYWALL
CENTERLINE
OF HOOD
8½”
4¼”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 4¼” DIMENSION)
3” to 6”
FRAMING BEHIND
WOOD CROSS
SUPPORT
DRYWALL
CEILING
HEIGHT
8 FEET
9 FEET
Note : Minimum hood distance above cook top must not be less than 20”. A maximum of 30” above cook top is highly recommended for
best capture of cooking impurities. Distances over 30” are at the installer and user’s discretion; and if ceiling height and flue length permit.
* Ducted installations require purchase of flue kit Model AEWM43SB.
DUCT
METHOD
DUCTED*
NON-DUCTED
DUCTED*
NON-DUCTED
20” 21” 22” 23” 24” 25”
35-3/4” 36-3/4”
35-3/4” 36-3/4” 37-3/4”
35-3/4” 36-3/4” 37-3/4”
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note below)
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
38-3/4” 39-3/4” 40-3/4”
38-3/4” 39-3/4” 40-3/4”
38-3/4” 39-3/4” 40-3/4”
26”
42-3/4” 43-3/4” 44-3/4”
41-3/4”
42-3/4” 43-3/4” 44-3/4”
41-3/4”
42-3/4” 43-3/4” 44-3/4”
41-3/4”
30”27” 28” 29”
45-3/4”
45-3/4”
45-3/4”
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
Loading...