Best WC35I90SB Specification Sheet
DUNE
4-3/8
11
WC35I90SB
RANGE HOOD
Imagine the softly shaped landscape of rolling hills or
desert. DUNE found its inspiration from these simple
clean shapes. With a shape that by nature provides
good function, the reflective control is like touching
water, controlling the hood magically.
SPECIFICATION SHEET
FEATURES
Italian design
•
Wall mount
•
Finishes: 430 Stainless Steel, #4 Brushed
•
Width: 90 cm (35-7/16”)
•
Ducted/non-ducted telescopic flue accommodates 8’ to 9’
•
ceilings (Purchase non-duct recirculation kit separately.)
6” round duct connector/backdraft damper
•
2-level, halogen lighting (2 bulbs included. Type T4, G9 base,
•
120 volt, 25 watts max.)
4-speed electronic touch control
•
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 450 CFM of exhaust
Heat Sentry
•
excess cooking heat is detected
Delay timer control automatically shuts off range hood after 10
•
minutes
Filter clean reminder
•
Dishwasher-safe filter features a quick-release latch
•
For indoor use only
•
OPTIONS
Non-ducted recirculation kit (Model ANKWC35)
•
Replacement charcoal filters available (Model AFCWC35)
•
Flue extension for 10-ft. ceilings (ducted Model AEWC345SB)
•
(non-ducted Model AEWC345SBN), stainless steel (39-3/8” long)
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
120 60 3.12 450 9.0 6” round
TM
- automatically turns blower to high speed when
10
35-7/16
21-1/8
min. 30 - max. 48
18-3/8
HVI-2100 CERTIFIED RATINGS comply
with new testing technologies and
procedures prescribed by the Home
Ventilating Institute, for off-the-shelf
products, as they are available to
consumers. Product performance is
rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of
humanly-perceived loudness, based on
laboratory measurements.
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
21G 99044734B
WC35I SERIES WIRING
L
L
C
5 "
1
16
CENTERLINE
OF HOOD
WC35I SERIES MOUNTING
8”
4”
18½” to 19½”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 4” DIMENSION)
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
CEILING
HEIGHT
8 FEET
9 FEET
10 FEET (see note B)
A. Minimum hood distance above cook top must not be less than 24”. A maximum of 30” above cook top is highly recommended for best
capture of cooking impurities. Distances over 30” are at the installer and user’s discretion; and if ceiling height and flue length permit.
B. Requires optional 10-ft. flue extension - ducted Model AEWC345SB or non-ducted Model AEWC345SBN.
DUCT
METHOD
DUCTED
NON-DUCTED
DUCTED OR
NON-DUCTED
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note A)
24” 25” 26” 27” 28” 29”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
38-3/8” 39-3/8” 40-3/8” 41-3/8”
38-3/8” 39-3/8” 40-3/8” 41-3/8”
38-3/8” 39-3/8” 40-3/8” 41-3/8” 42-3/8”
38-3/8” 39-3/8” 40-3/8” 41-3/8” 42-3/8”
42-3/8”
43-3/8” 44-3/8”
43-3/8” 44-3/8”
43-3/8” 44-3/8”
30”
Loading...