Best K42 Specification Sheet

K42 SERIES RANGE HOODS

The classic pyramid with the performance for the serious cook or the recreational cook.

FEATURES

Italian design

• Wall mount

• Finishes: 304 Stainless Steel #4 Brushed, Polished Brass,

•

Polished Copper

Widths: 36”, 42”, 48”, 54”

• Telescopic flue accommodates 8’ to 9’ ceilings

• 8” round duct connector/backdraft damper

• Halogen lighting (2 x 20 watt, MR16 - bulbs included)

• Slide controls: on-off, 3-speed

• Twin centrifugal blower

• Dishwasher-safe filter features a quick-release latch and

•

decorative cover plate

Heat Sentry

•

when excess cooking heat is detected

For indoor use only

• California Title 24 compliant

•

- automatically turns blower to high speed

SPECIFICATION SHEET

OPTIONS

Flue extension for 10’ ceiling (Model FEXTK42) (31-7/8”

•

long)

Replacement grease filters available

• Replacement bulb (Part No. SB02300668)

• Exterior blower version (KEX42) available, providing 600,

•

900, 1200, or 1500 CFM exhaust

SPECIFICATIONS

HVI-2100 CERTIFIED RATINGS comply with new

VOLTS AMPS CFM SONES DUCT

120 6.26 1000 10.0 8” round

BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711

BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

Mount range hood

so bottom of hood is

24” minimum above

cooking surface.

Submitted by Date

11H 99042841G

K42 SERIES WIRING

3 "

3 4

3 "

3 4

2 "

Air Outlet Ø 7-7/8”

6-3/16”

K42 SERIES MOUNTING

WOOD CROSS

SUPPORT – SECURED

TO FRAMING AND LOCATED BEHIND

DRYWALL

Wiring Box

FRAMING BEHIND WOOD

CROSS SUPPORT

DRYWALL

CEILING MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)

HEIGHT 24” 25” 26” 27” 28” 29” 30”

MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP

8 FEET 36-3/16” 37-3/16” 38-3/16” 39-3/16”

9 FEET 37-3/16” 38-3/16” 39-3/16” 40-3/16” 41-3/16” 42-3/16”

10 FEET WITH 38-3/16” 39-3/16” 40-3/16” 41-3/16” 42-3/16”

NOTE: Minimum hood distance above cooktop must not be less than 24”. A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities. Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit.

FEXTK42

MOUNTING BRACKET LOCATION (ABOVE 36” HIGH COOKTOP)