Best IPP9IQT42SB Specsheet
COLONNE ISLAND
min. 33 - max. 49-3/8
14-5/8
3-3/4
3
IPP9IQ SERIES
RANGE HOOD
SPECIFICATION SHEET
The traditional island chimney hood design from Italy
has stood the test of time. The Colonne Island builds
on this legacy with a new powerful design that looks
spectacular from any angle, and at the same time,
handles the needs of pro-style cooking.
FEATURES
Italian design
•
Ceiling mounted island hood
•
Finishes: 430 Stainless Steel, #4 Brushed
•
Width: 42-in. Depth: 30-in.
•
Ducted telescopic flue accommodates 8’ to 9’ ceilings
•
10” round duct connector/backdraft damper
•
2-level halogen lamps, T4, G9, 25-Watt, Qty:4
•
Three speed plus boost, electronic pushbuttons with display
•
Quiet iQ12 blower system with high-efficiency BLDC motor
•
Heat Sentry
•
excess cooking heat is detected
Delay timer control automatically shuts off range hood after 10
•
minutes
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe, mesh lined, Hi-Flow
•
For indoor use only
•
OPTIONS (Not included with hood. Purchase separately.)
Flue extension for 10-ft. to 11-ft. ceilings (ducted Model AEIPP9SB,
•
stainless steel 42-3/4”” long)
Universal make-up air damper (MD6TU, MD8TU, MD10TU)
•
Remote control (Model ACR3)
•
SPECIFICATIONS
VOLTS AMPS CFM / SONES CFM / SONES CFM / SONES CFM / SONES DUCT
(Boost) (High Speed) (Med. Speed) (Low Speed)
120 8.4 1100 / 10.5 830 577 330 / 1.0 10" round
This product was tested by Broan-NuTone for airflow performance using the ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.
TM
- automatically turns blower to high speed when
TM
baffle filters
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
iQ12 - 1200 CFM Blower System
providing:
Best in class quiet operation.
•
Up to 30% faster smoke and odor
•
removal than comparable models.
Up to 22x more energy efficient than
•
comparable models.
Guaranteed Performance System (GPS) technology
•
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
Using a duct reducer with this hood may prevent the product
•
from calibrating.
1
18-3/4
12-1/2
42
30
31-1/2
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
51B 99045194E
IPP9IQ SERIES WIRING
WIRING BOX
COVER
IPP9IQ SERIES MOUNTING
ROOF CAP
10” ROUND
DUCT
LOCATION FOR INCOMING POWER TO HOOD.
PROVIDE 36-IN. OF WIRE FOR 8-FT. TO 9-FT. CEILINGS
AND 60-IN. OF WIRE FOR 10-FT. TO 11-FT. CEILINGS.
10” ROUND
HOOD
24” TO 36” ABOVE
COOKING SURFACE
DECORATIVE
ELBOW
FLUE
EAVE
VENT
CEILING
HEIGHT
8 FEET
9 FEET
10 FEET
(see note b.)
11 FEET
(see note b.)
10-1/4” DIA.
11-7/16”
11
10-1/4”
FRONT OF HOOD
2"x4"
STRUCTURE
MINIMUM
MOUNTING AT CEILING
HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see notes below)
24” 25” 26”
24¾” 23¾”
--- --- 33¾” 32¾” 31¾” 30¾” 29¾” 28¾” 27¾” 26¾” 25¾” 24¾”
48¾”
47¾” 46¾” 45¾” 44¾” 43¾” 42¾” 41¾” 40¾” 39¾”
--- --- ---
27” 28” 29” 30”
ASSEMBLED SUPPORT FRAME HEIGHT (IN.)
22¾” 21¾”
---
--- ---
56¾” 55¾” 54¾” 53¾” 52¾” 51¾” 50¾” 49¾” 48¾”---
31”
--- ---
32” 33” 34”
--- ---
--- ---
38¾” ---
35”
---
36”
---
--- Mounting height is not possible.
a. Minimum hood distance above cook top must not be less than 24”. A maximun of 36” above
cook top is highly recommended for best capture of cooking impurities. Distances over
36” are at the installer and user’s discretion; and if ceiling height and flue length permit.
b. Requires optional 10-ft. to 11-ft. flue extension, ducted model AEIPP9SB.
Loading...