Best FEXTK7388SS, FEXTK7788SS Specifications
K7388 SERIES
RANGE HOODS
SPECIFICATION SHEET
A hand-formed, gently curving glass canopy creates
a dramatic, contemporary appearance and an open,
airy feel.
FEATURES
Italian design
•
Wall mount
•
Finishes: 430 Stainless Steel #4 Brushed
•
Width: 35-7/16”
•
Ducted/non-ducted telescopic flue accommodates 8’ to 9’ ceilings
•
6” round duct connector/backdraft damper
•
Halogen lighting (2 x 20 watt, 12V, Type JC 12V 20W G4 Base)
•
with multilevels from bright cooktop illumination to a low nighttime
setting (bulbs included)
Advanced, electronic push-button controls feature delay shutoff
•
Quiet, variable-speed centrifugal blower with high-efficiency
•
motor produces 450 CFM of exhaust
Four-speed motor controls include an optimum blower memory
•
setting for everyday use
Delay timer control automatically shuts off range hood after five
•
minutes
Special control indicates when it’s time to clean the filter
•
Can be ducted to the outside or non-ducted for indoor recirculation
•
(purchase recirculation kit separately)
Dishwasher-safe filter features a quick-release latch and
•
decorative cover plate
Heat SentryTM - automatically turns blower to high speed when
•
excess cooking heat is detected
For indoor use only
•
OPTIONS
Backsplash available (Contact Broan Technical Support)
•
Replacement grease filters available
•
Non-ducted recirculation kit (Model NDK7388)
•
Flue extension for 10’ ceiling (for ducted applications) (Model
•
FEXTK7388SS) (35-1/2” long)
Replacement charcoal filters available (Model
•
FILTERSQUARE)
Replacement bulb (Part No. SB02300891)
•
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13 450 9.0 6” round
HVI-2100 CERTIFIED
RATINGS comply with new
testing technologies and
procedures prescribed by the
Home Ventilating Institute, for
off-the-shelf products, as they
are available to consumers.
Product performance
is rated at 0.1 in. static
pressure, based on tests
conducted in a state-of-theart test laboratory. Sones
are a measure of humanlyperceived loudness, based
on laboratory measurements.
min 32"
21-1/4"
3-5/16"
max 48"
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
01A 99043161E
K7388 SERIES WIRING
CENTER LINE OF
HOOD & DUCT
9”
4½”
120 VOLT 60 HZ GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 9” FLUE
COVER DIMENSIONS)
18” - 22”
K7388 SERIES MOUNTING
FRAMING BEHIND
WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
CEILING DUCT HOOD DISTANCE ABOVE 36” COOK TOP (SEE NOTE 1)
HEIGHT METHOD 24” 25” 26” 27” 28” 29” 30”
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
8 FEET
9 FEET DUCTED OR 37 38” 39” 40” 41” 42” 43”
10 FEET DUCTED WITH
FEXT7388 39” 40” 41” 42” 43”
DUCTED 37” 38” 39” 40” 41”
NONDUCTED 37” 38” 39” 40”
NONDUCTED
L
C
L
1
5 "
16
MOUNTING
BRACKET LOCATION
(ABOVE 36” HIGH
COOKTOP)
NOTES:
1. Minimum hood distance above
cooktop must not be less than
24”.
A maximum of 30” above the
cooktop is highly recommended
for best capture of cooking
impurities.
Distances over 30” above the
cooktop are at the installer’s
and user’s discretion - providing that ceiling height and flue
length permit.
Loading...