Best FEXTK30SS Specifications
K30 SERIES
RANGE HOODS
Seamless, handcrafted beauty and multifaceted
construction create a timeless object of desire.
FEATURES
Italian design
•
Wall mount
•
Finishes: 304 Stainless Steel #4 Brushed, White, Black
•
Widths: 35-7/16” (90cm), 48”
•
Ducted telescopic flue accommodates 8’ to 9’ ceilings
•
6” round duct connector/backdraft damper
•
Halogen lighting (2 x 20 watt, Type MR16 for 35-7/16”
•
model; 3 x 20 watt, Type MR16 for 48” model) provides twolevel lighting – bright cooktop illumination and a low
nighttime setting (bulbs included)
Advanced, multispeed, electronic push-button controls
•
with individual speed indicators
Quiet, variable-speed centrifugal blower with high-
•
efficiency motor produces 500 CFM of exhaust
Delay timer control automatically shuts off range hood
•
after ten minutes
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe filters feature a quick-release latch and
•
polished stainless steel
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
OPTIONS
Replacement grease filters available
•
Flue extension for 10’ ceiling (Model FEXTK30 in Stainless
•
Steel, White, Black) (30-1/8” Long)
Exterior blower version (KEX30) available, providing 600,
•
900, 1200, or 1500 CFM exhaust
SPECIFICATION SHEET
SPECIFICATIONS
VOLTS AMPS CFM SONES DUCT
120 3.13/3.34 500 8.5 6” round
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
50J 99043158C
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they
are available to consumers. Product performance is
rated at 0.1 in. static pressure, based on tests
conducted in AMCA’s state-of-the-art test laboratory.
Sones are a measure of humanly-perceived loudness,
based on laboratory measurements.
K30 SERIES WIRING
CENTERLINE OF
HOOD & DUCT
K30 SERIES MOUNTING
4¼”
8½”
120-VOLT, 60 HZ, GROUNDED WALL OUTLET
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 8½” DIMENSION)
21” - 27”
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
DRYWALL
GNILIEC
THGIEH
TEEF8"8/5-92"8/5-03"8/5-13"8/5-23"8/5-33
TEEF9"8/5-92"8/5-03"8/5-13"8/5-23"8/5-33"8/5-43"8/5-53
HTIWTEEF01
EULF03KTXEF
NOISNETXE
"42 "52 "62 "72 "82 "92 "03
FRAMING BEHIND
WOOD CROSS
SUPPORT
L
C
L
5"
5"
"8/5-33"8/5-43"8/5-53
)ETONEES(POTKOOCHGIH"63EVOBAECNATSIDDOOH
POTKOOCHGIH"63EVOBANOITACOLTEKCARBGNITNUOM
MOUNTING
BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
NOTE: Minimum hood distance
above cooktop must not be less
than 24”.
A maximum of 30” above the
cooktop is highly recommended
for best capture of cooking
impurities.
Distances over 30” above the
cooktop are at the installer’s and
user’s discretion - providing that
ceiling height and flue length
permit.
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Loading...