Best D49M30SB, D49M36SB, D49M30BLS Reference Sheet

CATTURA

™

D49M

BUILT-IN

Our VERTEX™ Complete Capture Design technology performs as well as an island hood.

An LED light bar evenly illuminates the entire cooking surface.

A touch of a button raises or lowers the 18" downdraft.

Sleek, easy-to-clean touch-control panel.

An optional remote control button raises or lowers the downdraft as needed. Also available in black stainless.

VERTEX™ Complete Capture

Design technology ventilates as well as an island hood.

Up to 35% quieter operation than any other downdraft.

Chimney raises 18" off the

Long-lasting LED lighting technology means lamps may never need replacement.

™

Heat Sentry heat and adjusts speed to high

detects excessive

automatically.

counter surface for optimal capture on all burners.

Model Numbers:

D49M30SB D49M36SB D49M48SB D49M30BLS D49M36BLS

Hood Sizes

Widths 30", 36", 48" (stainless only)

Depth 2-1/4"

Finish

Stocked Brushed Stainless Steel, Black Stainless Steel 30" and 36"

Special Order Not Available

Features

Lighting Type LED, 7W (30"); 14W (36"); 18W (48") Lighting Levels 2 Lighting Lamps Included Yes Control Type 4-speed Capacitive Glass Control Features Heat Sentry

™

, Delay Off, Filter Timer Remote Control Optional ACRD, ACRDBLS Filter Type Mesh Grease Filter Non-ducted Capability Yes

Hood Blower Options (Must choose one blower sold separately)

Internal PF6

FlexBlower CFM 600 Sones 8.8

External In-Line ILB3 ILB6 ILB9 ILB11

Max CFM 280 600 800 1100 Sone levels are typically half of comparable CFM internal blowers.

External Exterior EB6 EB9 EB12 EB15

Max CFM 600 900 1200 1500 Sone levels are typically half of comparable CFM internal blowers.

Accessories

Non-ducted Recirculating Kit ANKD Transition to 8" Round AVDKD8 Transition to 10" Round AVDKD10 Charcoal Filter AFCD Stainless Range Trim Kit ATKD30SB, ATKD36SB, ATKD48SB Stainless End Cap Extension ATTD1 Black Stainless End Cap Extension ATTD1BLS Automatic MUA Damper MD6T, MD8T, MD10T (Requires Fresh Air Inlet) Fresh Air Inlet 641FA, 643FA, 610FA

Installation Requirements

Amps @ 120V: Internal Blower 6.0 Max Electrical Plug In Duct Size: Internal Blower 8" Duct Size: External Blower 10" at hood Duct Direction Front, Left, Right, Rear or Down Backdraft Damper Not Included

10-minute time-delay shut-off feature and reminder light for filter maintenance.

Remote control to activate downdraft from another location.

Works with optional Automatic Make-Up Air Dampers.

Ten FlexBlower ducting options give you unsurpassed design flexibility. The FlexBlower can be installed in front, to the left, right rear, or below the downdraft.

Optional end cap extension adds 1" to width for 31", 37" and 49" applications.

Shown in black stainless steel finish.

BESTRangeHoods.com

926 West State Street, Hart ford, Wisconsin 53027 In U.S.A. 800-558-1711, In Canada 866-737-7770

BEST is a registered trademark; Cattura and VERTEX are trademarks of Broan.

reserves the right to change speciﬁcations at any time without notice.