Best CP57IQT602SB Specs
CP57IQ SERIES
RANGE HOODS
SPECIFICATION SHEET
All-in-one design includes liner, blower,
filtration, controls, lighting, and damper for easy
installation into custom canopy hoods. Intended
for all residential applications, including
commercial-style cooking surfaces.
FEATURES
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel #4 Brushed
•
Widths: 34-3/8”, 46-3/8”, 52-3/8”, 58-3/8”, 64-3/8”
•
Depth: 19-1/4” (
•
22-1/2” (All Widths except 34-3/8”)
10” round duct connector with backdraft damper
•
1-level LED lighting (2 LED modules - 34-3/8” & 46-
•
3/8” Widths, 4 LED modules - 52-3/8”, 58-3/8” & 64-3/8”
Widths) 6 Watts max., 3000K nominal
Easily accessible, dishwasher safe stainless steel
•
Hi-Flow
4-speed electronic blower control
•
Quiet iQ12 blower system with high efficiency BLDC
•
Heat Sentry
•
Delay timer control automatically shuts off range hood
•
after 10 minutes
Special control indicates when it’s time to clean the filter
•
For indoor use only
•
Remote control (optional) (ACR2)
•
TM
motor
when excess cooking heat is detected
34-3/8” & 46-3/8” Widths only),
baffle filters with handles
TM
- automatically turns blower to high speed
iQ12 - 1200 CFM Blower System
providing:
Best in class quiet operation.
•
Up to 30% faster smoke and odor
•
removal than comparable models.
Up to 22x more energy efficient than comparable models.
•
Guaranteed Performance System (GPS) technology
•
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
Using a duct reducer with this hood may prevent the product
•
from calibrating.
4-1/2” (19-1/4” Depth)
5-3/8” (22-9/16” Depth)
12”
4-7/8”
11”
7/8”
7/8”
C
L
34-3/8”, 46-3/8”
52-3/8”, 58-3/8”, 64-3/8”
3”
*19-1/4”, **22-1/2”
3”
* 19-1/4” Depth available in
SPECIFICATIONS
VOLTS AMPS CFM / SONES CFM / SONES CFM / SONES CFM / SONES DUCT
(Boost) (High Speed) (Med. Speed) (Low Speed)
120 8.3 1100 / 10.0 875 / 7.0 625 / 4.0 310 / <0.3 10" round
This product was tested by Broan-NuTone for airflow performance using the ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Mississauga, Ontario www.BestRangeHoods.com 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
** 22-1/2” Depth available in all Widths except 34-3/8”.
31L 99045199A
34-3/8” & 46-3/8” Widths only.
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D
and E measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
POWER PACK CUTOUT DIMENSIONS
SERIES WIDTH
D E
36” 193⁄8” 34½”
5
22
⁄8”
3
⁄8” 46½”
5
⁄8”
22
5
⁄8”
22
34½”
46½”
D
58½”
E
CP57IQ
36”
48” 19
48”
54” 225⁄8” 52½”
60”
66” 225⁄8” 64½”
CP57IQ SERIES HOOD SYSTEM
MODEL 437
HIGH CAPACITY ROOF CAP
CP57
IQ SERIES
HOOD
MODEL 441
10” ROUND WALL CAP
MODEL 418
10” ROUND
ADJUSTABLE ELBOW
MODEL 410
10” ROUND
STANDARD DUCT
10” ROUND VERICAL IN-LINE DAMPER
(INCLUDED WITH CP57
IQ SERIES HOOD)
All duct or blower accessories sold separately
unless noted otherwise.
DUAL iQ1200 BLOWER (1200 CFM)
(included)
Loading...