Best CP57IQ Specification Sheet
CP57IQ SERIES
RANGE HOODS
SPECIFICATION SHEET
All-in-one design includes liner, blower,
filtration, controls, lighting, and damper for easy
installation into custom canopy hoods. Intended
for all residential applications, including
commercial-style cooking surfaces.
FEATURES
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel no. 4 Brushed
•
Max blower airflow: 1500 CFM*
•
120 VAC, 60 Hz, 8.3 Amps
•
Widths: 34-3/8”, 46-3/8”, 52-3/8”, 58-3/8”, 64-3/8”
•
Depth: 19-1/4” (
•
22-1/2” (All Widths except 34-3/8”)
10” round duct connector with backdraft damper
•
1-level LED lighting (2 LED modules - 34-3/8” &
•
46-3/8” Widths, 4 LED modules - 52-3/8”, 58-3/8” &
64-3/8” Widths) 6 Watts max., 3000 K nominal
Easily accessible, dishwasher safe stainless steel
•
hybrid filters with handles
4-speed electronic blower control
•
Quiet iQ12 blower system with high efficiency BLDC
•
motor
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
Delay timer control automatically shuts off range hood
•
after 10 minutes
Special control indicates when it’s time to clean the filter
•
For indoor use only
•
Remote control (optional) (Model ACR3)
•
Universal Make-Up Air Damper (optional) (Models
•
MD6TU, MD8TU, MD10TU)
34-3/8” & 46-3/8” Widths only),
iQ12 - 1200 CFM Blower System
providing:
Best in class quiet operation.
•
Up to 30% faster smoke and odor
•
removal than comparable models.
Up to 22x more energy efficient than comparable models.
•
Guaranteed Performance System (GPS) technology
•
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
Using a duct reducer with this hood may prevent the product
•
from calibrating.
4½
,
5
12
8
/
5
11
* 19-1/4” Depth available in
** 22-1/2” Depth available in all widths except 34-3/8”.
7/8
7/8
52
34/
/
8
C
, 58
L
8
, 46/
/
8
8
, 64/
8
34-3/8” & 46-3/8” widths only.
NOTE: D
/
SHOWN ARE IN INCHES.
8
3
*19¼, **22½
IMENSIONS
3
See next page for blower performances.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are avaialable to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
BEST Hartford, Wisconsin www.bestrangehoods.com 800-558-1711
BEST Drummondville, QC, Canada www.bestrangehoods.ca 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
02H 99045199F
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D and E
measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
POWER PAC K CUTOUT DIMENSIONS
SERIES WIDTH DE
3
⁄8” 34½”
3
⁄8”” 46½”
5
⁄8” 46½”
5
⁄8” 52½”
5
⁄8” 58½”
5
⁄8” 64½”
D
E
CP57IQ
36” 19
48” 19
48” 22
54” 22
60” 22
66” 22
HVI PERFORMANCE
Sones CFM
Duct Orientation Size
Normal Medium* High* Boost Normal Medium* High*
Boost
0.25 in. w.g.
Boost
0.1 in. w.g.
Round - Vertical 10 in. 0.3 4.0 7.0 11.0 290 625 875 1050 1100
CP57IQ SERIES HOOD SYSTEM
MODEL 437
(HIGH CAPACITY ROOF CAP)
ADJUSTABLE ELBOW)
(10” ROUND DUCT
— 2 FT. SECTIONS)
CP57IQ SERIES
HOOD
MODEL 441
(10’’ ROUND WALL CAP)
MODEL 418
(10” ROUND
MODEL 410
10” ROUND VERTICAL
IN-LINE DAMPER (INCLUDED WITH
CP57IQ SERIES HOOD)
All duct and blower accessories sold
separately unless noted otherwise.
HL0249
DUAL iQ12 BLOWER (1200 CFM)
(INCLUDED)
Loading...