Best CP55IQ SPECIFICATION SHEET
CP55IQ SERIES
RANGE HOODS
SPECIFICATION SHEET
All-in-one design includes liner, blower, filtration,
controls, lighting, and damper for easy installation
into custom canopy hoods. Intended for all
residential applications, including commercialstyle cooking surfaces.
FEATURES
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel #4 Brushed
•
Widths: 34-3/8”, 40-3/8”
•
Depth: 19-1/4”
•
8” round duct connector with backdraft damper
•
1-level LED lighting (2 LED modules, 6 Watts max.) 3000K
•
nominal
Easily accessible, dishwasher safe stainless steel
•
Hi-FlowTM baffle filters with handles
4-speed electronic blower control
•
Quiet iQ6 blower system with high efficiency BLDC motor
•
Heat Sentry
•
when excess cooking heat is detected
Delay timer control automatically shuts off range hood after
•
10 minutes
Special control indicates when it’s time to clean the filter
•
For indoor use only
•
OPTIONS (Not included with hood. Purchase separately.)
Non-ducted kit - ANKCP55
•
- Charcoal filters included
Charcoal filters - AFCROUND2
•
Remote control (Model ACR3)
•
Universal Make-Up Air Damper (Models MD6TU,
•
MD8TU, MD10TU)
TM
- automatically turns blower to high speed
iQ6 - 600 CFM Blower System
providing:
Best in class quiet operation.
•
Up to 30% faster smoke and odor
•
removal than comparable models.
Up to 22x more energy efficient than comparable models.
•
Guaranteed Performance System (GPS) technology
•
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
Using a duct reducer with this hood may prevent the product
•
from calibrating.
12”
4-7/8”
11”
4-1/2”
7/8”
7/8”
C
L
34-3/8”, 40-3/8”
3”
19-1/4”
3”
SPECIFICATIONS
VOLTS AMPS CFM / SONES CFM / SONES CFM / SONES CFM / SONES DUCT
(Boost) (High Speed) (Med. Speed) (Low Speed)
120 4.7 600 / 8.5 450 / 5.5 290 / 2.0 150 / <0.3 8" round
This product was tested by Broan-NuTone for airflow performance using the ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
51B 99045170C
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D
and E measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
POWER PACK CUTOUT DIMENSIONS
SERIES WIDTH
CP55IQ
36” 193⁄8” 34½”
42” 40½”
D E
3
⁄8”
19
D
E
CP55IQ SERIES HOOD SYSTEM
MODEL 634 OR 644
ROOF CAP
-- OR --
MODEL 643
8” ROUND WALL CAP
8” ROUND
ADJUSTABLE ELBOW
8” ROUND
STANDARD DUCT
8” ROUND ADAPTER WITH DAMPER
(INCLUDED WITH CP55IQ SERIES HOOD)
CP55IQ SERIES
HOOD
All duct or blower accessories sold separately
unless noted otherwise.
SINGLE iQ6 BLOWER (600 CFM)
(included)
Loading...