Best CP45I362SB, CP45I369SB, CP45I489SB Specification Sheet
CP45I SERIES
RANGE HOODS
SPECIFICATION SHEET
All-in-one design includes liner, blower,
filtration, controls, lighting, and damper for easy
installation into custom canopy hoods. Intended
for all residential applications, including
commercial-style cooking surfaces.
FEATURES
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel #4 Brushed
•
Widths: 34-3/8”, 46-3/8”
•
Depth: 19-1/4” (both widths) or 22-1/2” (34-3/8” width only)
•
8” round duct connector with backdraft damper
•
Four-setting cooktop lighting (Uses 50W, GU10 halogen
•
lamps. Bulbs included. 2 lamps on 34-3/8” wide hood, 4
lamps on 46-3/8” wide hood.)
Easily accessible, dishwasher safe stainless steel
•
Evolution
4-speed electronic blower control with LinkLogic®
•
enabled technology
Powerful, centrifugal blower with high-efficiency motor
•
produces 600 CFM
Quiet operation
•
Heat SentryTM - automatically turns blower to high speed
•
when excess cooking heat is detected
Compatible with the ARP8 CFM reducer kit to reduce
•
CFM to 250-300
Delay timer control automatically shuts off range hood
•
after 10 minutes
Special control indicates when it’s time to clean the filter
•
For indoor use only
•
SPECIFICATIONS
MODEL NO. VOLTS AMPS CFM / SONES CFM / SONES DUCT
(High Speed) (Low Speed)
CP45
CP45
CP45
TM
baffle filters with handles
I362SB 120 3.7 600 / 8.5 210 / 1.1 8" round
I369SB 120 3.7 600 / 8.5 210 / 1.1 8” round
I489SB 120 4.5 600 / 8.5 210 / 1.1 8” round
OPTIONS
Non-ducted kit (34-3/8” width only)
•
- ANKCP4536
- Charcoal filters included
Replacement charcoal filters (34-3/8” width only)
•
- AFCCP4536
12”
4-7/8”
11”
Add 1/16”
*
for rivet heads.
4-1/2”
7/8”
7/8”
*34-3/8”, *46-3/8”
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.1 in. static
pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
3”
C
L
*19-1/ 4”
*22-1/ 2” (3 4-3/8 ” wid th only)
3”
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Mississauga, Ontario www.BestRangeHoods.com 877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
01A 99044508D
I
To minimize the gap around the power pack, take actual width and depth measurements of power pack and add 1/16” to get D
and E measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
POWER PACK CUTOUT DIMENSIONS
SERIES WIDTH
36” 193⁄8” 34½”
CP45I
36” 225⁄8” 34½”
48” 193⁄8” 46½”
D E
D
E
CP45I SERIES HOOD SYSTEM
MODEL 634 OR 644
ROOF CAP
MODEL 643
8” ROUND WALL CAP
8” ROUND
ADJUSTABLE ELBOW
8” ROUND
STANDARD DUCT
8” ROUND ADAPTER WITH DAMPER
(INCLUDED WITH CP45I SERIES HOOD)
CP45I SERIES
HOOD
SINGLE BLOWER (600 CFM)
(INCLUDED WITH CP45
SERIES HOOD)
Loading...