Best AFCWT32 Specifications
WT32I SERIES
8-3/8"
RANGE HOODS
SPECIFICATION SHEET
Traditional Italian design chimney hood. Design
includes modern features and high performance
necessary in today’s upscale residential
kitchens.
FEATURES
Wall mount
•
Finish: 430 Stainless Steel #4 Brushed
•
Widths: 30”, 36”, 42”
•
Depth: 22”
•
Duct connector with back draft damper - 8” round
•
Three-setting cook top lighting. Uses two (2), 50W,
•
GU10 halogen lamps. Three (3) lamps on 42” wide
hood. Bulbs included.
Quick release stainless steel / aluminum mesh filters are
•
dishwasher safe.
4-speed electronic push button control with blue backlit
•
selection indicators.
Powerful, centrifugal blower with high efficiency motor
•
produces 600 CFM
Quiet operation
•
Heat Sentry ™ - automatically turns blower to high
•
speed when excess cooking heat is detected.
Delay timer control automatically shuts off range hood
•
after 5 minutes.
Special control indicates when it’s time to clean the
•
filters.
OPTIONS
Non-ducted kit - ANKWT32
•
- Charcoal filters included
Flue extension for 10-foot ceilings - AEWT32SB
•
Make-up Air damper - MD6TR (6” duct), MD8TR (8” duct)
•
- Relay and transformer included
Air Flow Reducer Kit - ARP8
•
- Reduces air flow to 300 CFM or less
Non-ducted Replacement Filters - AFCWT32
•
- Includes (2) filters
10-1/4"
17-1/2"
1"
2"
30", 36", 42"
22"
14-7/8"
min. 30" max. 42-1/4"
12-1/2"
SPECIFICATIONS
MODEL NO. VOLTS AMPS CFM / SONES CFM / SONES DUCT
(High Speed) (Low Speed)
WT32I302SB 120 4.0 600 / 9.5 200 / 1.4 8" round
WT32I362SB 120 4.0 600 / 9.5 200 / 1.4 8” round
WT32I422SB 120 4.5 600 / 9.5 200 / 1.4 8” round
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
01A 99044616B
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1
in. static pressure, based on tests conducted in a state-ofthe-art test laboratory. Sones are a measure of humanlyperceived loudness, based on laboratory measurements.
WT32I SERIES WIRING
8-3/4”
CENTER LINE OF
DUCT AND HOOD
WT32I SERIES MOUNTING
WOOD CROSS SUPPORT –
SECURED TO FRAMING AND
LOCATED BEHIND DRYWALL
3”
MIN.
4-3/8”
36” Max.
½”
GROUNDED WALL OUTLET -
OFFSET FROM DUCT CENTER LINE
(STAY WITHIN 8¾” DIMENSION)
FRAMING BEHIND
WOOD CROSS
SUPPORT
15
3
/
16
”
7
7
/
8
”
120 VOLT 60 HZ
DRYWALL
MOUNTING DISTANCE ABOVE 36” HIGH COOKTOP (SEE NOTE BELOW)
CEILING DUCT
HEIGHT METHOD
MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP
DUCTED OR
8 FEET
9 FEET
10 FEET
NOTE: Minimum hood distance above cooktop must not be less than 24”.
A maximum of 30” above the cooktop is highly recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users’ discretion; and if ceiling height and flue length permit.
NON-DUCTED
DUCTED -- -- -- -- -- -- 42-3/4”
NON-DUCTED -- -- -- -- 40-3/4” 41-3/4” 42-3/4”
DUCTED 38-3/4” 39-3/4” 40-3/4” 41-3/4” 42-3/4”
NON-DUCTED
24” 25” 26” 27” 28” 29” 30”
36-3/4” 37-3/4” 38-3/4” 39-3/4” 40-3/4” 41-3/4” 42-3/4”
36-3/4” 37-3/4” 38-3/4” 39-3/4” 40-3/4” 41-3/4” 42-3/4”
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
MOUNTING BRACKET
LOCATION
(ABOVE 36” HIGH
COOKTOP)
Loading...