Best ABWPD48SB Specifications
WPD28I SERIES
RANGE HOOD
Especially designed to be installed outdoor
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
FEATURES
Corrosion resistant 316 Stainless Steel construction
•
UL Listed for use in damp locations when properly
•
connected to a GFCI circuit.
Hood width: 36’’ or 48’’
•
Halogen lighting (2 x 50 watt GU10 for 36” hood,
•
4 x 50 watt GU10 for 48” hood) lamps included
Switch controls: Lighting, on-off, and infinite speed
•
Easily accessible, dishwasher-safe stainless steel
•
baffle filters
Heat Sentry turns blower ON to HIGH speed when
•
excess heat is detected
OPTION
Backsplash (ABWPD Series): Widths - 36’’ and 48’’
•
Stainless Steel construction - protects back wall
•
and wipes clean easily
Decorative flue (AEWPD Series): Widths - 36’’ and 48’’
•
Stainless Steel construction - hides ducting and wipes
•
clean easily
Designed for use with interior blower model P12D (purchase
•
separately)
SPECIFICATIONS
120 VAC, 60 Hz
Amps for 36” hood (without blower): 0.8 A
Amps for 48” hood (without blower): 1.7 A
SPECIFICATION SHEET
HB0042
HK0082A
18”
” (102 mm)
4
(457 mm)
16”
(406 mm)
HA0047A
Backsplash ABWPD Series
36” or 48”
(914 or 1219 mm)
14
(356 mm)
10”
(254 mm)
”
U
C
HA0046A
L
Decorative flue
AEWPD Series
US
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
01A 99043651B
HL0038
AEWPD Series
SOFFIT CHIMNEY
(Optional, required only for
soffit-less installation)
Model 418
10” Round adjustable
elbow (optional)
WPD28I HOOD
(Canopy with blower control & lighting.
Required for all installations)
ABWPD Series
BACKSPLASH
(Stainless steel wall covering
with shelves. Optional.)
WPD28I
HOOD SYSTEM
Model 437
(High capacity roof cap)
Model 441
(10” Rd wall cap)
Model 421 (optional)
(10” Round vertical in-line damper)
Model SV03428 transition
(9” x 18” to 10” round)
(included with hood)
Model 410
(10” Round duct - 2 ft. sections)
MODEL P12D BLOWER
(Interior Blower,
sold separately)
Loading...