Besantek BSTVT107 Instruction Manual

INSTRUCTION MANUAL

Adjustable Non-contact

VOLTAGE DETECTOR

Test Equipment Depot - 800.517.8431

99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Index

1. Safety precaution......................

2. Description................................

3. Features....................................

4. Specications............................

5. Operation..................................

6. Maintenance.............................

Page

1-2

2
3

4
5-6
7-8

-1-

1. Safety precaution

Electricity can cause severe injuries with
high voltages. Therefore it is very important
to read the following info before using the
Adjustable Non-contact Voltage Detector.

● This instrument must only be used and
operated by a competent trained
person and in strict accordance with the
instructions. We will not accept liability for
any damage or injury caused by misuse
or non compliance with instructions and
safety procedures.

● Examine the Adjustable Non-contact
Voltage Detector to make sure it is clean
and dry. If in doubt, wipe with a clean, dry,
lint-free cloth.

● The voltage Detector test should always
be used as an indication only.

● An absence of voltage detection during
some testing situations may not always
mean the circuit under test is dead.

● Don't use the Detector if it is broken.

● Don't operate with the case open.

● Don't apply more than the rated voltage

between the tip and earth ground.

-2-

● Using the Detector near equipment that
Generates electromagnetic interference
can result in unstable or inaccurate
detections.

2. Description

The Adjustable Non-contact Voltage Detector
is intended to check for the presence of AC
voltage, signaling the user with an intermittent

tone and a ashing LED.

The Adjustable Non-contact Voltage Detector
is useful for identifying hot and neutral

conductors, nding a break in a wire, and

detecting the presence of AC voltage at
outlets, fuses, circuit breakers, switches,
cables and wires.