Besantek BST-BT01 Instruction Manual

BATTERY TESTER

INSTRUCTION MANUAL

Index

1. Introduction.........................................

2. Safety notes........................................

3. Features..............................................

4. Specications......................................

5. Instrument layout.................................

6. Measurement......................................

7. Maintenance.......................................

Page

1

2

3

4

5-6

7

8-9

-1-

1. Introduction

NOTE
This meter has been designed and tested according
to CE safety requirements for electronic measuring
apparatus, IEC / EN 61010-1 and other safety
standards. Follow all warnings to ensure safe
operation.

WARNING
READ "SAFETY NOTES" (NEXT PAGE) BEFORE
USING THE METER.

-2-

2. Safety notes

● Read the following safety information carefully

before attempting to operate or service the meter.

● Use the meter only as specied in this manual.
Otherwise, the protection provided by the meter
may be impaired.

● Rated environmental conditions:

(1) Indoor Use.
(2) Installation Category I 100V
(3) Pollution Degree 2.
(4) Altitude up to 2000 meters.
(5) Relative humidity 80% max.
(6) Ambient temperature 0~40°C.

● Observe the International Electrical Symbols listed
below:

Meter is protected throughout by double
insulation or reinforced insulation.

Warning! Risk of electric shock.

Caution! Refer to this manual before using the
meter.

DC voltage