Besa Lighting Divi User Manual

FIXTURE INSTALLATION GUIDE

Model 1WU Series (One Light Swingarm 12V)

1WU.01, Rev.2 6-09

CAUTION: Turn off power to electrical box before installing

1. Carefully remove parts from package.

2. Remove the two Decorative Cap Nuts ( A)
to release the Mounting Bracket (B).

3. Attach the Mounting Bracket to the Outlet Box( C)
with two Machine Screws (D) provided.

4. Connect the electrical leads from the fixture
tranformer to the house supply wires, black to
black and white to white, and secure with wirenuts
provided (E). Attach the house ground wire to the
bare copper lead from the Canopy (F), and secure
with the provided wirenut.

6695 Taylor Rd. Blacklick, OH 43004

C

D

G

E

www.besalighting.com

F

A

5. Align the circular openings on the canopy with
the Threaded Posts (G) on the Mounting Plate.
Push the Canopy over the Threaded Posts until
the Canopy is flush with the wall, then secure with

the Decorative Cap Nuts.

6. To attach the glass, you must first remove the Threaded Checkring
from the socket. Place the glass shade over the socket and secure
with the Threaded Checkring.

7. Install the 50 watt bipin MR16 bulb provided. When relamping this fixture

it is important to use a Lensed MR16 bulb.

8. Restore power.

9. The On/Off operation and brightness level is controlled by
the Rotary Knob located at the underside of the canopy.
Simply rotate clockwise to increase brightness.

B

NOTE:

Glass Shade is for
instructional purposes.
Actual Glass Shade may
vary in size and shape.

All electrical connections and the installation of this fixture must be in agreement with local codes,
ordinances or the NEC (National Electric Code) or CEC (Canadian Electrical Code).
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.