Bertoni VECTOR Manual Instruction

VECTOR

combi stroller

MANUAL INSTRUCTION

BEFORE USE CAREFULLY READ THESE INSTRUCTIONS AND
KEEP THEM FOR FURTHER REFERENCE. FAILURE TO OBSERVE

EN

THESE INSTRUCTIONS MAY AFFECT THE SAFETY OF YOUR
CHILD!

SAFETY REQUIREMENT

1. The stroller may turn over if something is hanged on the handle or put on the canopy!

2. Stroller should always be used under the supervision of an adult!

3. Do not allow children to suspend him/herself or play in the stroller!

4. Do not allow children to stand in the stroller!

5. Use brakes if you do not hold the stroller with hand!

6. Use the brakes when placing the child in a wheelchair!

7. Do not use the stroller on uneven surfaces near fire or other dangerous places!

8. Do not use the stroller on stairs and escalators!

10. Do not allow your child to stand on the seat and foot rest!

11. Do not use accessories not approved by the manufacturer!

12. Adjustment of the backrest should be performed only by an adult!

13. Do not leave the stroller on hills or inclined surfaces even if you have activated the brake systems!

14. Do not leave the child unattended!

15. Please, use the brake systems even when you not using the stroller to avoid emergency.

16. Always use the safety belt systems!

17. Oil wheels and metal parts regularly to make sure the stroller works well.

18. Do not let your child play with stroller parts in order to avoid injury!

19. Always dry and air the stroller if it has got wet.

20. Any additional load or incorrect operation may cause damage or incident.

21. The person assembling the stroller must be acquainted with the functionality of the stroller.

22. Be very careful on the streets. Always fold the stroller before going upstairs or downstairs.

23. Do not use functions or ways of exploitation not mentioned in this instruction!

24. The height of carried child should not exceed 96 cm.

25. Do not use inappropriate accessories with the stroller.

26. The stroller is designed to bear total load up to 15 kg.

27. The storage basket bear load up to 2 kg.

28. This stroller can be used only for 1 child.

29. This stroller is suitable for children up to 3 years old.

30. The summer basket is not suitable for children under 6 months.

31. The newborn basket is designed for weight up to 9 kg.

WARNING

WARNING! It may be dangerous to leave your child unattended!
WARNING! Ensure that all locking devices are engaged before use!
WARNING! Do not add a mattress thicker than 10 mm!
WARNING! Start to use safety belts as soon as your child is capable to sit without assistance!
WARNING! Any load attached to the handle affects the stability of the pram/pushchair!
WARNING! Check that the pram body or seat unit attachment devices are correctly engaged

before use!

WARNING! Newborn child is not able to sit and hold his head up unassisted. Therefore, do not fix

the backrest in sitting position! Lower it to maximum lying down!

WARNING

combination with the waist belt! To prevent injury from a fall or a slip off always use the shoulder
straps!

WARNING! Regularly check for loose parts!

! Always use safety belts when the child is in the stroller! Always use the crotch belt in

WARNING! When you adjust the cart, beware the child is not close to moving parts of the stroller.

WARN

WARNING! Do not hang on any bags and packages!
WARNING

! This vehicle is designed for children from 0 months and weight up to 15 kg!

WARNING! Newborn basket is compatible with model Vector.
WARNING! This product is not suitable for running or skating!

EN 1888:2003

MAINTENANCE AND CARE

1. To clean the metal parts use damp cloth and then dry them.

2. To clean the plastic parts use cloth, water and soft detergent.

3. To clean the woven fabric use upholstery cleaner.

4. Any additional load affects stroller's stability!

5. When storing never place other items on or in the stroller. This will damage it!

6. Oil caster bolts and wheels regularly.

7. Check for damaged parts regularly and replace immediatly!

10*

3

PARTS

4

11*

5

2

1

9

8

6

7

1. Metal frame of the stroller - 1 pc.

2. Summer basket - 1 pc.

3. Footcover - 1 pc.

4. Canopy - 1 pc.

5. Frontbar - 1 pc.

6. Shopping basket - 1 pc.

7. Front wheels - 2 pcs.

8. Rear wheels - 2 pcs.

9. Accessories bag - 1 pc.

10. *Car seat - 1 pc.

11. *Newborn basket - 1 pc.

*Additional accessories! Not included in the set!

1 3

2

1

2

fig.A

4

10

5

8a 8b

6

7

2

1

9

11

12 13

2

1

2

16

14

1

1

15

2

1

17 18

1

2

19

20

21

3 3

11 1

23

2

22

1

2

24 25

27

29

26

fig.B

1

2

28

2

1

30

1

31

32

33

1

34

36

38 39

2

1

1

35

37

40

UNFOLDING

1. Folded stroller. (picture 1)

2. To unfold the stroller pull out the levers (1) located on the both handles and push the transport handle

down (2). Lift the handle of the stroller up and the stroller will unfold and lock automatically. (picture 2)

3. Check the locking of the front tubes into the locks above the front wheels. (fig.A)

4. Correctly unfolded stroller should look as the same way shown in picture 3.

ASSEMBLING

INSTALLATION/UNINSTALLATION OF THE FRONT WHEELS

1. Insert the front wheel into the plastic elements on the front part of the stroller until “click” sound is
heard. (picture 4) Repeat the same operation for the other wheel.

2. To remove the wheel press the lever on its bottom side and pull the wheel out. (picture 5) Repeat
the same operation for the other wheel.

INSTALLATION/UNINSTALLATION OF THE REAR WHEELS

1. Insert the rear wheel into the rear pipe of the metal construction. The metal fixar (1) should be into the
opening (2). (picture 6) Repeat the same operation for the other wheel.

2. To remove the wheels press the metal fixer (1) by using a screw-driver and pull them out (2). (picture 7)

INSTALLATION OF THE SHOPPING BASKET

1. To install the shopping basket hang the brackets to the front and rear hooks as shown on picture 8a
and 8b.

INSTALLATION/UNINSTALLATION OF THE SEAT

1. Install the plastic elements located on the both sides of the textile part of the seat to the plastic
pad. (picture 9)

2. Attach the textile part of the seat to the plastic pad by using the “tic-tac” caps. (picture 10)

3. To remove the textile part unbutton all the “tic-tac” caps and release the plastic elements of the

seat from the plastic pad.

INSTALLATION/UNINSTALLATION OF THE FRONTBAR

The frontbar can be opened only from the one side to allows the child to get in and out from the
stroller easily when grows up.

1. Install the frontbar into the plastic elements of the stroller until “click” sound is heard. (picture 11)

2. To unlock the frontbar press the button (1) on its bottom side and pull it out (2). (picture 12)

3. To lock the frontbar insert it in the armrest until it “clicks”.

4. To remove the frontbar press the both buttons (1) and pull it out (2). (picture 13)

Warning! Do not remove the frontbar when a child is in the stroller! Do not put hot drinks on
the frontbar! This may be dangerous! Do not pick up the stroller by using the frontbar! This
leads to incorrigible damages!

INSTALLATION/UNINSTALLATION OF THE CANOPY

1. To install the canopy slide its clamps down until they are fixed as shown on picture 14.

2. Button the caps of the canopy from the inside and outside side.

3. To remove the canopy unbutton the “tic-tac” caps on its inside and outside side. Lift the lever (1) up

and slide the clamp of the canopy up (2). (picture 15)

USAGE

ADJUSTING THE LENGTH OF THE HANDLES

1. To adjust the length of the handles press the buttons located on their outside side and pull them out
to lengthen them(1). To shorten them repeat the same operations in reverse order (2). (picture 16)

ADJUSTING THE POSITION OF THE SEAT

The seat has 4 positions.

1. To lower the seat pull the handle on the backside by simultaneously lower the backrest. (picture 17)

2. If you want to lift the backrest just push it up.

ADJUSTING THE CANOPY

1. To unfold/fold the canopy use the mechanisms located on its both sides. (picture 18)

ADJUSTING THE FOOTREST

The footrest can be adjusted.

1. To lower use the buttons on its both sides. (picture 19)

2. The lifting is automatically. (picture 20)

USING THE SAFETY BELT

1. To lock the safety belt insert the plastic elements into the central buckle (1).

2. To unlock the safety belt press the button on the central buckle (2) and pull the plastic elements

out (3). (picture 21)

USING THE BRAKES

1. To activate the brakes step on the lever (1) on the rear wheel. To release the brakes step on the
lever (2). (picture 22)

TRANSPORTATION

The stroller can be easily moved when it is folded.

1. Lock the front wheels. You can pull the stroller by the control handle as shown on picture 23.

2. You can also use the side handle for transportation as shown on picture 24.

REAR BOARD

1. The rear board is helpful when lifting the front of the stroller. If it is necessary step on the rear
board and lift the front part of the stroller by pushing the both handles down as shown on picture 25.

Warning! Never use the frontbar to pick up the stroller! This leads to breakage of its elements!

ADDITIONAL INSTALLATIONS*

INSTALLATION OF THE CAR SEAT

1. To install the car seat to the stroller remove the frontbar, textile part of the seat, adjust the backrest

to its lowest position and lift the footrest to its highest position. (picture 26) To remove the textile part
unbutton all “tic-tac” buttons. To remove the textile part from the arm supports slide (1) and pull out (2)
the plastic elements from the inside of the textile as shown on fig.B.

2. To install the car seat to the stroller you have to use the additional adaptors to it. Attach them to the
fixing mechanisms of the car seat as shown on picture 27.

3. Install the attached to the car seat additional adaptors into the places ( lift the cover 1) on the frame
of the stroller. (picture 28) To fix the car seat to the stroller press the button (2). Make sure that the car
seat is well fixed.

4. To adjust the position of the handle of the car seat press simultaneously the both red buttons on its
both sides. (picture 29)

5. To remove the car seat lift the lever (1) of the additional adaptors and remove the car seat from the
stroller. (picture 30)

6. To remove the additional adaptors from the car seat press the red button located on it and remove
the adaptors. (picture 31)

INSTALLATION OF THE NEWBORN BASKET

1. To install the newborn basket remove the frontbar, textile part of the seat, adjust the backrest to its

lowest position and lift the footrest to its highest position. (picture 32) Please, see point 1 of section
“INSTALLATION OF THE CAR SEAT”.

2. Insert the fixing elements into the places made for this purpose (lift the cover 1) on the frame of the
stroller until they “click”. (picture 33) Make sure that the basket is well fixed.

3. To adjust the position of the newborn basket press simultaneously the both buttons on its both
sides. (picture 34)

4. Adjust the position of the base of the newborn basket by using the lever (1) shown on picture 35.

5. Adjust the position of the canopy by pushing it forward or backward. (picture 36)

6. To remove the newborn basket pull the lever on its rear side and pull the basket up. (picture 37)

*The additional installations explained above are valid only when there are an additional accessories
in the set (car seat, newborn basket). The additional accessories are not included in the set!

FOLDING

1. To fold the stroller pull out the both levers on the handles (1) by simualtenously pushing the stroller
down (2) to release the locking mechanism. (picture 38)

2. Hold the control handle on the rear side of the stroller and pull it up until the stroller is folded.
(picture 39)

3. Correctly folded stroller should look as the same way shown in picture 40. Make sure that the
stroller is correctly folded by locking the transport lock.

Дидис ООД - България
Шумен 9700, “Правда” 1
Тел.: [phone]
Факс: [phone]

e-mail: [e-mail]

www.bertoni-eu.com

Didis Ltd. - Bulgaria
Shumen 9700, “Pravda” 1 Str.
Tel.: [phone]
Fax: [phone]
e-mail: [e-mail]